单/双光束激光焊接熔池行为及焊缝成形特性比较
[1] Xie J. Dual beam laser welding[J]. Welding Journal, 2002, 81(9): 223-230.
[2] 李俐群, 陈彦宾, 陶 汪. 铝合金双光束焊接特性研究[J]. 中国激光, 2008, 35(11): 1783-1788.
[3] Chen S H, Zhai Z L, Huang J H, et al. Interface microstructure and fracture behavior of single/dual-beam laser welded steel-Al dissimilar joint produced with copper interlayer[J]. The International Journal of Advanced Manufacturing Technology, 2016, 82(1): 631-643.
[4] 雷正龙, 李 颖, 陈彦宾, 等. 双光束激光填丝焊工艺对铝合金焊接气孔率的影响[J]. 焊接学报, 2013, 34(2): 40-44.
Lei Zhenglong, Li Ying, Chen Yanbin, et al. Effect of process parameters on porosity formation ratio in dual-beam laser welding of aluminum alloys with filler wire[J]. Transactions of the China Welding Institution, 2013, 34(2): 40-44.
[5] Harooni M, Carlson B, Kovacevic R. Dual-beam laser welding of AZ31B magnesium alloy in zero-gap lap joint configuration[J]. Optics & Laser Technology, 2014, 56(5): 247-255.
[6] Drezet J M, Lima M S F, Wagnière J D, et al. Crack-free aluminium alloy welds using a twin laser process[C]. Proceedings of the International Institute of Welding Conference, 2008: 87-94.
[7] Shi Y, Zhang H, Watanabe T, et al. CW/PW dual-beam YAG laser welding of steel/aluminum alloy sheets[J]. Optics and Laser Engineering, 2010, 48(7): 732-736.
[8] 杨 璟, 李晓延, 陈 俐, 等. 1420铝锂合金双光点激光焊接头组织性能[J]. 稀有金属材料与工程, 2011, 40(5): 871-874.
Yang Jing, Li Xiaoyan, Chen Li, et al. Microstructure and properties of twin spot laser welded joints of 1420 Al-Li alloy[J]. Rare Metal Materials and Engineering, 2011, 40(5): 871-874.
[9] Haboudou A, Peyre P, Vannes A B, et al. Reduction of porosity content generated during Nd∶YAG laser welding of A356 and AA5083 aluminium alloys[J]. Materials Science and Engineering: A, 2003, 363(1-2): 40-52.
[10] Shibata K, Iwase T, Sakamoto H, et al. Study on behavior in twin spot beam welding of aluminum alloys by means of X-ray observation[J]. Quarterly Journal of the Japan Welding Society, 2003, 21(2): 204-212.
[11] Shibata K, Iwase T, Sakamoto H, et al. Process stabilization by dual focus laser welding of aluminum alloys for car body[C]. SPIE, 2003, 5121: 376-384.
[12] Hu J, Tsai H L. Fluid flow and weld pool dynamics in dual-beam laser keyhole welding[C]. ASME 2003 International Mechanical Engineering Congress and Exposition, 2003, 3: 151-159.
[13] Zhou J, Tsai H L. Investigation of fluid flow and heat transfer in 3D dual-beam laser keyhole welding[C]. ASME 2010 International Manufacturing Science and Engineering Conference, 2010, 2: 247-254.
[14] Fabbro R, Hamadou M, Coste F. Metallic vapor ejection effect on melt pool dynamics in deep penetration laser welding[J]. Journal of Laser Applications, 2004, 16(1): 16-19.
[15] Xie J. Welding morphology and thermal modeling in dual-beam laser welding[J]. Welding Journal, 2002, 81: 283-290.
马国龙, 李俐群, 陈彦宾. 单/双光束激光焊接熔池行为及焊缝成形特性比较[J]. 中国激光, 2017, 44(2): 0202002. Ma Guolong, Li Liqun, Chen Yanbin. Comparative Study of Molten Pool Behavior and Weld Formation Characteristic in Single/Dual Beam Laser Welding[J]. Chinese Journal of Lasers, 2017, 44(2): 0202002.