双自由曲面LED均匀照明准直透镜设计

为了克服传统LED准直器在近场难以实现均匀照明的缺陷, 设计了一种双自由曲面均匀照明准直透镜.透镜分为折反两部分, 每部分都利用双自由曲面进行匀光和准直.根据马吕斯定律, 推导了实现光束准直出射的等光程方程, 并将切面迭代法加入等光程条件, 同步计算准直透镜上下自由曲面的面形数据.仿真分析表明: 对1 mm×1 mm的白光LED芯片, 84.55%的能量集中在±2°内, 近场照度均匀性达到94.59%, 远场照度均匀性为89.01%；当LED芯片尺寸不超过2.0 mm×2.0 mm时, ±4°内的能量利用率大于83.5%, 近场照度均匀性在90%以上.该准直透镜能同时实现近场和远场的均匀照明, 公差符合装配要求, 光能利用率高.

Abstract

A LED collimator with double freeform surfaces was designed for uniform illumination in both near field and far field.The collimator includes refractive part and reflective part,and each part has double freeform surfaces.Based on Malus Law,the constant optical path length equations that realize the rays collimating were derived.Then associating with tangent-plane iterative method,the date both up freeform surface and down freeform surface simultaneously could be calculated.The simulations show that,84.55% of the energy is collected in ±2° for 1 mm×1 mm size white LED after considering the Fresnel loss,reflective surfaces loss and material absorbing.The uniformity in near field is 94.59%, and the uniformity in far field is 89.01%.The uniformity in near field and the optical efficiency in ± 4° are above 90% and 83.5% respectively,while the LED chip sizes are under 2 mm×2 mm.It is illustrated that the LED collimator can realize uniform illumination in both near field and far field with high light efficiency and the tolerance meet the requirements of alignment.

参考文献

[1] JOO J Y,WAN H K,PARK S S,et al.Design and manufacturing of LED primary optics for road lighting engine ［C］.SPIE,2012,855085502O.

[2] SHUANG Z,KAI W,FEI C,et al.Lens design of LED searchlight of high brightness and distant spot［J］.Journal of the Optical Society of America A,2011,28(5):815-820.

[3] 罗晓霞,刘华,卢振武,等.实现LED准直照明的优化设计［J］.光子学报,2011,40(9):1351-1355.

LUO Xiao-xia,LIU Hua,Lu Zhen-wu,et al.Automated optimization of free-form surface lens for LED collimation［J］.Acta Photonica Sinica,2011,40(9):1 351-1355.

[4] 张航,贺叶美,李栋,等.基于均分配焦椭流线法的LED匀光管菲涅尔反射器设计［J］.光子学报,2012,41(4):421-424.

ZHANG Hang,HE Ye-mei,LI Dong,et al.Design for Fresnel reflector of uniformity light LED tubes based on ellipse flow-line methods with equipartition and foci map［J］.Acta Photonica Sinica,2012,41(4):421-424.

[5] 陈瑞,岑松原,金尚忠.基于同步多曲面法的发光二极管机器视觉照明设计［J］.光子学报,2013,42(8):956-961.

CHEN Rui,CEN Song-yuan,JIN Shang-zhong.A machine vision illumination system based on simultaneous multiple surfaces design ［J］.Acta Photonica Sinica,2013,42(8):956-961.

[6] CHEN J J,WANG Y W,HUANG K L,et al.Freeform lens design for LED collimating illumination［J］.Optics Express,2012,20(10):10984-10995.

[7] CHEN J J,LIN C T.Freeform surface design for a light-emitting diode–based collimating lens［J］.Optical Engineering,2010,49(9):093001.

[8] WANG G Z,WANG L L,LI F L,et al.Collimating lens for light-emitting-diode light source based on non-imaging optics ［J］.Applied Optics,2012,51(11):1654-1659.

[9] DEJAN G,PABLO B,JUAN C.M,et al.TIR RXI collimator［J］.Optics Express,2012,20(S1) :A51-A61.

[10] PABLO B,JUAN C.M,JOSE B,et al.Simultaneous multiple surface optical design method in three dimensions ［J］.Optical Engineering,2004,43(7):1489-1502.

[11] ZHENG Z R,HAO X,LIU X.Freeform surface lens for LED uniform illumination［J］.Applied Optics,2009,48(35):6627-6634.

[12] WANG L,QIAN K Y,LUO Y.Discontinuous free-form lens design for prescribed irradiance ［J］.Applied Optics,2007,46(18):3716-3723.

[13] 张以谟.应用光学［M］.第三版, 北京: 电子工业出版社, 2008.

[14] 孟祥翔, 刘伟奇, 柳华,等.反射式椭圆高斯光束平顶整形系统［J］.发光学报,2013,34(7):940-947.

MENG Xiang-xiang,LIU Wei-qi,Liu Hua,et al.A reflective optical system for converting elliptical Gaussian laser beam to flat-top beam［J］.Chinese Journal of Luminescence,2013,34(7):940-947.

孟祥翔, 刘伟奇, 冯睿, 魏忠伦, 周敏, 杨建明. 双自由曲面LED均匀照明准直透镜设计[J]. 光子学报, 2014, 43(8): 0822003. MENG Xiang-xiang, LIU Wei-qi, FENG Rui, WEI Zhong-lun, ZHOU Min, YANG Jian-ming. Design of LED Collimator for Uniform Illumination with Double Freeform Surfaces[J]. ACTA PHOTONICA SINICA, 2014, 43(8): 0822003.

双自由曲面LED均匀照明准直透镜设计

关于本站 Cookie 的使用提示

全站搜索

双自由曲面LED均匀照明准直透镜设计

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索