[1] ZHANG G F, ZHANG B, DENG Z H.An experimental study on laser cutting mechanisms of polycrystalline diamond compacts［J］.Annals of the CIRP, 2007, 56(1): 201-204.

[2] 邓福铭, 陈启武.PDC超硬复合刀具材料及其应用［M］.上海: 化学工艺出版社, 2003.

[3] 贾特.聚晶金刚石刀具刃磨工艺与切削性能的研究［D］.大连: 大连理工大学, 2006.

[4] 曹凤国, 桂小波.大面积PCD复合片电火花加工高效节能脉冲电源的研究［J］.金刚石与磨料磨具工程, 2004(2): 17-19.

[5] 刘顺福, 吕战竹, 赵福令.聚晶金刚石的电火花磨削: 特种加工技术2001年中国机械工程学会年会暨第九届全国特种工学术年会论文集［C］.北京: 机械工业出版社, 2001: 68-72.郭彦玲, 李瑞芬, 王广杰.用电火花磨削法加工聚晶金刚石刀具［J］.东北林业大学学报, 1995, 23(3): 112-116.

[6] CAO F.A new technology of high-speed machining polycrystalline diamond with increased electric discharge explosion force: in Proceedings of International Symposium for Electro-Machining［C］.Nagoya:［s.n.］, 1989.

[7] 裴景玉, 郭常宁, 胡德金.聚晶金刚石的电火花磨削加工［J］.上海交通大学学报, 2006, 40(10): 1679-1683.

[8] 吴春丽, 王金军, 张建华.断续磨削加工聚晶金刚石的机理研究［J］.人工晶体学报, 2003, 32(2): 86-90.

[9] RAMOS J A, BOURELL D L.Modeling of surface roughness enhancement of indirect-SLS metal parts by laser surface polishing: proceedings of the TMS Fall Meeting［C］.［S.I.］:［s.n.］, 2002: 191-202.

[10] CHRISTIAN DUTTO, ERIC FOGARASSY, DANIEL MATHIOT.Numerical and experimental analysis of pulsed excimer laser: processing of SiC.12th Conf. on Lasers in Materials Processing［C］.Nice: Springer-Verlag, 2001: 203-209.

[11] PMSLSHE A, PARK B S.A review of technology for polishing and planarizing chemically vapor-deposited(CVD) diamond films and substrates［J］.Diamond and Related Materials, 1999(8): 1198-1213.

[12] 江超, 王又清.激光抛光技术的发展与展望［J］.激光技术, 2002, 26(6): 421-424.

[13] 张峰烈, 付星.基于连续激光探测的脉冲激光热抛光能量密度实时控制系统［J］.应用激光, 2011, 31(2): 124-129.

[14] 友清.金刚石的精密激光加工［J］.国外激光, 1994(12): 31-33.

[15] LI L J.Advanced laser machining and the equipment［M］Beijing : Beijing Institute of Technology Press, 1993.

[16] 曹凤国, 黄建宇.金刚石拉丝模激光微细加工技术［J］.电加工, 1995(2): 2-4.