[1] 李池娟, 孙昌锋, 席喆,等. 非球面光学零件的应用[J]. 激光与红外, 2013, 43(3): 244-247.

    Li Chijuan,Sun Changfeng,Xi Zhe,et al.Application of optical aspheric element[J].Laser and Infrared, 2013, 43(3): 244-247.

[2] Shorey A B, Golini D, Kordonski W. Surface finishing of complex optics[J]. Optics and Photonics News, 2007,18(10): 14-16.

[3] 张小兵. 非球面光学元件加工及检测技术综述[J]. 兵器材料科学与工程,2014(2): 106-111.

    Zhang Xiaobing.Review on manufacture and measurement method of aspheric surface optical part[J].Ordnannce Material Science and Engineering, 2014(2): 106-111.

[4] Yan H S, Wang N S, Zhang J G, et al. Modelling, scheduling and simulation of flexible manufacturing systems using extended stochastic high-level evaluation Petri nets[J]. Robotics and Computer-Integrated Manufacturing, 1998, 14(2): 121-140.

[5] Dumas P, Golini D, Tricard M. Improve figure and finish of diamond turned surfaces with magneto-rheological finishing (MRF)[J].SPIE, 2005, 5786: 296-304.

[6] Weiser M. Ion beam figuring for lithography optics[J]. Nuclear Instruments & Methods in Physics Research, 2009, 267(8/9): 1390-1393.

[7] 叶斯哲. 非球面数控抛光工艺参数与加工精度的关系研究[D]. 长春: 长春理工大学, 2013.

    Ye Shizhe. Research on the relationship between tchnological parameter and processing accuracy on sapheric cNc polishing[D]. Changchun: Changchun University of Science and Technology, 2013.

[8] 计时鸣, 李琛, 谭大鹏,等. 基于 Preston 方程的软性磨粒流加工特性[J]. 机械工程学报, 2011, 47(17): 156-163.

    Ji Shiming,Li Chen,Tan Dapeng,et al.Study on machinability of softness abrasive flow based on Preston equation[J].Journal of Mechanical Engineering,2011,47(17): 156-163.

[9] Rabinowicz E, Dunn L A, Russell P G. A study of abrasive wear under three-body conditions[J]. Wear, 1961, 4(5): 345-355.

[10] 汪浩.硬质合金刀具刃口钝化方法的研究[D].宁波: 宁波大学, 2012: 21-22.

    Wang Hao.Research of cemented carbide cutting tool edge passivation[D].Ningbo: Ningbo Univercity, 2012: 21-22.