[1] 宋兆泓. 航空发动机可靠性与故障抑制工程[M]. 北京: 北京航空航天大学出版社, 2002. 10～13

    Song Zhaohong. Aero-Engine Reliability and Fault Control Engineering [M]. Beijing: BUAA Press, 2002. 10～13

[2] 张晓东, 董世运, 徐滨士 等. 激光熔覆再制造成形金属裂纹的控制措施[C]. 第四届世界维修大会, 2008

    Zhang Xiaodong, Dong Shiyun, Xu Binshi et al.. Control measure for metal cracks of laser cladding remanufacturing [C]. The 4th World Congress on Maintenance, 2008

[3] E. Brtlcker, D. Lepski, E. Beyer. Modeling the influence of process parameters and additional heat sources on residual stresses in laser cladding [J]. J. Thermal Spray Technol., 2007, 16(3): 355～373

[4] G. Palumbo, S. Pinto, L. Tricarico. Numerical finite element investigation on laser cladding treatment of ring geometries [J]. J. Mater. Process. Technol., 2004, 155-156: 1443～1450

[5] 李守卫, 沈以赴, 顾冬冬 等. 多组元金属粉末激光选区烧结热力耦合有限元应力场分析[J]. 中国机械工程, 2007, 18(6): 751～755

    Li Shouwei, Shen Yifu, Gu Dongdong et al.. Thermal-mechanical coupling finite element analysis of stress field in selective laser sintering of multi-component metal powder [J]. China Mechanical Engineering, 2007, 18(6): 751～755

[6] 程广萍, 李明喜, 何宜柱 等. 激光熔覆层温度场和应力场的数值模拟[J]. 热处理, 2009, 24(4): 49～53

    Cheng Guangping, Li Mingxi, He Yizhu et al.. Numerical simulation of temperature field and stress field in laser clad coating [J]. Heat Treatment, 2009, 24(4): 49～53

[7] 李俐群, 张亮, 戴景明. 激光填丝多层焊温度场和应力场的数值模拟[J]. 中国激光, 2011, 38(10): 1003002

    Li Liqun, Zhang Liang, Dai Jingming. Numerical simulation of temperature and stress fields in wire filling laser multilayer welding [J]. Chinese J. Lasers, 2011, 38(10): 1003002

[8] 占焕校, 王勇, 韩涛 等. 42CrMo钢表面单道激光宽带处理后熔凝层的残余应力[J]. 中国激光, 2008, 35(4): 625～630

    Zhan Huanxiao, Wang Yong, Han Tao et al.. Residual stress analysis of the remelting zone on 42CrMo steel plate in single-pass laser wide-band treatment [J]. Chinese J. Lasers, 2008, 35(4): 625～630

[9] 顾建强, 骆芳, 姚建华. 激光熔覆过程残余应力的数值模拟[J]. 激光与光电子学进展, 2010, 47(10): 101401

    Gu Jianqiang, Luo Fang, Yao Jianhua. Numerical simulation of residual stress during laser cladding [J]. Laser & Optoelectronics Progress, 2010, 47(10): 101401

[10] 陈明祥. 弹塑性力学[M]. 北京：科学出版社, 2010. 123～131

    Cheng Mingxiang. Elasticity and Plasticity [M]. Beijing: Science Press, 2010. 123～131

[11] 中国航空材料手册编辑委员会. 中国航空材料手册(第2版)[M]. 北京: 中国标准出版社, 2002

    China Aeronautical Materials Handbook Editorial Committee. China Aeronautical Materials Handbook (2nd ed.) [M]. Beijing: China Standard Press, 2002

[12] Y. S. Touloukian. Thermophysical Properties of Matter [M]. New York: IFI/Plenum,1970. 263