光学学报, 2019, 39 (3): 0305002, 网络出版: 2019-05-10   

基于环形光束整形的衍射光学元件的精确设计 下载: 1525次

Precise Design of Diffraction Optical Elements Based on Annular Beam Shaping
作者单位
1 西南技术物理研究所, 四川 成都 610041
2 清华大学精密仪器系, 北京 100084
引用该论文

杨美霞, 孔哲, 谭峭峰, 任钢, 薛亮平. 基于环形光束整形的衍射光学元件的精确设计[J]. 光学学报, 2019, 39(3): 0305002.

Meixia Yang, Zhe Kong, Qiaofeng Tan, Gang Ren, Liangping Xue. Precise Design of Diffraction Optical Elements Based on Annular Beam Shaping[J]. Acta Optica Sinica, 2019, 39(3): 0305002.

参考文献

[1] 杨亮亮. 多层衍射光学元件斜入射衍射效率的测量[J]. 光学学报, 2017, 37(2): 0205003.

    杨亮亮. 多层衍射光学元件斜入射衍射效率的测量[J]. 光学学报, 2017, 37(2): 0205003.

    Yang L L. Measurement of diffraction efficiency for multi-layer diffractive optical elements with oblique incidence[J]. Acta Optica Sinica, 2017, 37(2): 0205003.

    Yang L L. Measurement of diffraction efficiency for multi-layer diffractive optical elements with oblique incidence[J]. Acta Optica Sinica, 2017, 37(2): 0205003.

[2] 刘晓庆, 薛常喜. 基于轴棱锥的衍射光学元件设计及其光场分析[J]. 激光与光电子学进展, 2018, 55(4): 040501.

    刘晓庆, 薛常喜. 基于轴棱锥的衍射光学元件设计及其光场分析[J]. 激光与光电子学进展, 2018, 55(4): 040501.

    Liu X Q, Xue C X. Design of diffractive optical elements based on axicon and its light analysis[J]. Laser & Optoelectronics Progress, 2018, 55(4): 040501.

    Liu X Q, Xue C X. Design of diffractive optical elements based on axicon and its light analysis[J]. Laser & Optoelectronics Progress, 2018, 55(4): 040501.

[3] Wu C, Gu H R, Zhou Z H, et al. Design of diffractive optical elements for subdiffraction spot arrays with high light efficiency[J]. Applied Optics, 2017, 56(31): 8816-8821.

    Wu C, Gu H R, Zhou Z H, et al. Design of diffractive optical elements for subdiffraction spot arrays with high light efficiency[J]. Applied Optics, 2017, 56(31): 8816-8821.

[4] Gerchberg R W, Saxton W O. A practical algorithm for the determination of phase from image and diffraction plan picture[J]. Optik, 1972, 35(2): 237-246.

    Gerchberg R W, Saxton W O. A practical algorithm for the determination of phase from image and diffraction plan picture[J]. Optik, 1972, 35(2): 237-246.

[5] Wang D. Adaptive-weight iterative algorithm for flat-top laser beam shaping[J]. Optical Engineering, 2012, 51(7): 074301.

    Wang D. Adaptive-weight iterative algorithm for flat-top laser beam shaping[J]. Optical Engineering, 2012, 51(7): 074301.

[6] 颜树华. 利用二维杨-顾算法设计非对称结构衍射光学元件[J]. 光学技术, 2004, 30(6): 690-692.

    颜树华. 利用二维杨-顾算法设计非对称结构衍射光学元件[J]. 光学技术, 2004, 30(6): 690-692.

    Yan S H. Design diffractive optical elements with asymmetric structures using the two-dimensional Yang-Gu algorithm[J]. Optical Technique, 2004, 30(6): 690-692.

    Yan S H. Design diffractive optical elements with asymmetric structures using the two-dimensional Yang-Gu algorithm[J]. Optical Technique, 2004, 30(6): 690-692.

[7] Tan X, Gu B Y, Yang G Z, et al. Diffractive phase elements for beam shaping: a new design method[J]. Applied Optics, 1995, 34(8): 1314-1320.

    Tan X, Gu B Y, Yang G Z, et al. Diffractive phase elements for beam shaping: a new design method[J]. Applied Optics, 1995, 34(8): 1314-1320.

[8] 颜宏, 张卫, 叶一东, 等. 用于共孔径相干合成的衍射光学元件设计[J]. 强激光与粒子束, 2015, 27(6): 061002.

    颜宏, 张卫, 叶一东, 等. 用于共孔径相干合成的衍射光学元件设计[J]. 强激光与粒子束, 2015, 27(6): 061002.

    Yan H, Zhang W, Ye Y D, et al. Design of diffractive optical elements for filled-aperture coherent beam combining[J]. High Power Laser and Particle Beams, 2015, 27(6): 061002.

    Yan H, Zhang W, Ye Y D, et al. Design of diffractive optical elements for filled-aperture coherent beam combining[J]. High Power Laser and Particle Beams, 2015, 27(6): 061002.

[9] Kirkpatrick S, Gelatt C D, Vecchi M P. Optimization by simulated annealing[J]. Science, 1983, 220(4598): 671-680.

    Kirkpatrick S, Gelatt C D, Vecchi M P. Optimization by simulated annealing[J]. Science, 1983, 220(4598): 671-680.

[10] Voicu L I, Rabadi W A, Myler H R. Object support reconstruction from the support of its autocorrelation using multiresolution genetic algorithms[J]. Optical Engineering, 1997, 36(10): 2820-2827.

    Voicu L I, Rabadi W A, Myler H R. Object support reconstruction from the support of its autocorrelation using multiresolution genetic algorithms[J]. Optical Engineering, 1997, 36(10): 2820-2827.

[11] 曲卫东. 衍射光学光束整形技术研究与应用[D]. 北京: 清华大学, 2016: 61- 73.

    曲卫东. 衍射光学光束整形技术研究与应用[D]. 北京: 清华大学, 2016: 61- 73.

    Qu WD. Beam shaping with diffractive optical elements and its applications[D]. Beijing: Tsinghua University, 2016: 61- 73.

    Qu WD. Beam shaping with diffractive optical elements and its applications[D]. Beijing: Tsinghua University, 2016: 61- 73.

[12] 孙鸣捷, 于康龙, 孟照魁, 等. 一种采用振动混光棒的散斑抑制技术[J]. 中国激光, 2013, 40(10): 1002013.

    孙鸣捷, 于康龙, 孟照魁, 等. 一种采用振动混光棒的散斑抑制技术[J]. 中国激光, 2013, 40(10): 1002013.

    Sun M J, Yu K L, Meng Z K, et al. Speckle suppression method with vibrating light pipe[J]. Chinese Journal of Lasers, 2013, 40(10): 1002013.

    Sun M J, Yu K L, Meng Z K, et al. Speckle suppression method with vibrating light pipe[J]. Chinese Journal of Lasers, 2013, 40(10): 1002013.

[13] Redding B, Choma M A, Cao H. Speckle-free laser imaging using random laser illumination[J]. Nature Photonics, 2012, 6(6): 355-359.

    Redding B, Choma M A, Cao H. Speckle-free laser imaging using random laser illumination[J]. Nature Photonics, 2012, 6(6): 355-359.

杨美霞, 孔哲, 谭峭峰, 任钢, 薛亮平. 基于环形光束整形的衍射光学元件的精确设计[J]. 光学学报, 2019, 39(3): 0305002. Meixia Yang, Zhe Kong, Qiaofeng Tan, Gang Ren, Liangping Xue. Precise Design of Diffraction Optical Elements Based on Annular Beam Shaping[J]. Acta Optica Sinica, 2019, 39(3): 0305002.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!