激光与光电子学进展, 2012, 49 (10): 102202, 网络出版: 2012-08-22   

基于复合式抛物面聚光器的LED反光杯建模研究 下载: 592次

Modeling of LED Reflector Cup Based on Compound Parabolic Concentrator
作者单位
中国计量学院光学与电子科技学院, 浙江 杭州 310018
摘要
针对复合式抛物面聚光器(CPC)无法在TracePro软件中直接建模的不足,结合TracePro软件特点,对CPC关键参数进行了分析,通过数学模型对参数之间的几何关系进行了推导,得出了计算公式,实现了CPC在TracePro中的建模。将CPC设计成反光杯应用于LED灯具中,可方便地进行光学模拟和分析,进而有效地缩短产品开发周期和开发成本。为CPC设计提供了数学依据,通过建模验证了该方法的可行性,有效提高了设计效率。结果表明,用通过该方法设计出的CPC做成的LED反光杯,可以极大地提高灯具的发光效率。为其在照明领域的发展应用提供了更好的使用价值和前景。
Abstract
The compound parabolic concentrator (CPC) cannot be directly modeled in the TracePro software. According to the characteristics of the TracePro software, the CPC key parameters are analyzed through the mathematical model and the geometric relations among the key parameters are derived. The formulas of CPC parameters in TracePro modeling are obtained. Designing CPC as the reflector cup of LED luminaire is convenient for optical simulation and analysis, with which the product development cycle and development costs are reduced. The formula of theoretical calculation is also given, which makes modeling possible in TracePro software. The result shows that LED reflector cup based on the CPC designed by this method can greatly improve the optical efficiency of luminaires, contributing to the development of the LED lighting industry.
参考文献

[1] 刘灵芝, 李戬洪. 复合抛物面聚光器(CPC)光学分析研究[J]. 能源技术, 2006, 27(2): 52~56

    Liu Lingzhi, Li Jianhong. The optical performance of compound parabolic concentrators (CPC)[J]. Energy Technology, 2006, 27(2): 52~56

[2] W. T. Welford, R. Winston. The Optics of Nonimaging Concentrators[M]. New York: Academic Press, 1978. 3~8

[3] 杜春旭, 王普, 吴玉庭 等. 线性菲涅耳聚光装置的聚光比分析[J]. 光学学报, 2011, 31(8): 0808001

    Du Chunxu, Wang Pu, Wu Yuting et al.. Concentration ratio analysis of linear Fresnel reflector[J]. Acta Optica Sinica, 2011, 31(8): 0808001

[4] 汪飞, 隋成华, 叶必卿. 关于复合抛物面聚光器设计参数的研究[J]. 光学仪器, 2010, 32(3): 68~72

    Wang Fei, Sui Chenghua, Ye Biqing. The research about design parameter of compound parabolic concentrator[J]. Optical Instruments, 2010, 32(3): 68~72

[5] 张鑫, 屠其非, 宋贤杰. CPC简介及其在LED汽车灯具设计中的作用[J]. 照明工程学报, 2006, 17(1): 46~49

    Zhang Xin, Tu Qifei, Song Xianjie. Brief introduction of CPC and its function in the design of LED vehicle lamps[J]. China Illuminating Engineering Journal, 2006, 17(1): 46~49

[6] 周小丽, 刘木清, 朱绍龙 等. 基于复合抛物面收集器的LED光通量测量的研究[J]. 光电子·激光, 2009, 20(9): 1137~1140

    Zhou Xiaoli, Liu Muqing, Zhu Shaolong et al.. Study on LED′s luminous flux measurement using a compound parabolic concentrator[J]. J. Optoelectronics·Laser, 2009, 20(9): 1137~1140

[7] 王洪, 张小凡, 王海宏 等. 自由曲面LED路灯反射器设计[J]. 红外与激光工程, 2010, 39(4): 727~731

    Wang Hong, Zhang Xiaofan, Wang Haihong et al.. Design for optical freeform reflector of LED streetlight[J]. Infrared and Laser Engineering, 2010, 39(4): 727~731

[8] 余桂英, 金骥, 倪晓武 等. 基于光学扩展量的LED均匀照明反射器的设计[J]. 光学学报, 2009, 29(8): 2297~2301

    Yu Guiying, Jin Ji, Ni Xiaowu et al.. Design for LED uniform illumination reflector based on tendue[J]. Acta Optica Sinica, 2009, 29(8): 2297~2301

[9] 王洪, 张奇辉, 张小凡 等. 实现道路均匀照明的自由曲面反射器设计[J]. 光电工程, 2009, 36(12): 143~146

    Wang Hong, Zhang Qihui, Zhang Xiaofan et al.. Free form reflector design for street uniform illumination[J]. Opto-Electronic Engineering, 2009, 36(12): 143~146

[10] 苏宙平, 阙立志, 朱焯炜 等. 用于LED光源准直的紧凑型光学系统设计[J]. 激光与光电子学进展, 2012, 49(2): 022203

    Su Zhouping, Que Lizhi, Zhu Zhuowei et al.. Optical system design of the compact collimator for LED source[J]. Laser & Optoelectronics Progress, 2012, 49(2): 022203

[11] Chao-Heng Chen, Zhi-Peng Chen. An integrated LED reflector for backlight system[C]. SPIE, 2008, 7058: 705~810

[12] Karsten Eichhorn. LEDs in automotive lighting[C]. SPIE, 2006, 6134: 613405

[13] Hueseyin Murat, Herbert DeSmet, Dieter Cuypers et al.. Increased lumens per etendue by combining pulsed LEDs[C]. SPIE, 2005, 5740: 1~12

[14] 方志烈, 刘木清. 半导体照明光源的技术进展[J]. 激光与光电子学进展, 2010, 47(6): 062502

    Fang Zhilie, Liu Muqing. Technology status of light emitting diodes[J]. Laser & Optoelectronics Progress, 2010, 47(6): 062502

[15] 曹宇杰, 金尚忠, 岑松原. 高显色指数LED灯的设计[J]. 光学学报, 2011, 31(12): 1222002

    Cao Yujie, Jin Shangzhong, Cen Songyuan. Design for LED lamps with high color rendering index[J]. Acta Optica Sinica, 2011, 31(12): 1222002

[16] Renyong Yu, Shangzhong Jin, Songyuan Cen et al.. Effect of the phosphor geometry on the luminous flux of phosphor converted light-emitting diodes[J]. IEEE Photon. Technol. Lett., 2010, 22(23): 1765~1767

汪乐, 张树生, 翟静. 基于复合式抛物面聚光器的LED反光杯建模研究[J]. 激光与光电子学进展, 2012, 49(10): 102202. Wang Le, Zhang Shusheng, Zhai Jing. Modeling of LED Reflector Cup Based on Compound Parabolic Concentrator[J]. Laser & Optoelectronics Progress, 2012, 49(10): 102202.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!