[1] X H Wu. Review of alloy and process development of TiAl alloys[J]. Intermetallics, 2006, 14(10): 1114-1122.

[2] 乔红超, 赵吉宾, 陆莹. 纳秒脉宽NdYAG激光冲击强化激光器的研制及分析[J]. 中国激光, 2013, 40(8): 0802001.

    Qiao Hongchao, Zhao Jibin, Lu Ying. Develop and analysis of nanosecond pluse width NdYAG laser for laser peening[J]. Chinese J Laser, 2013, 40(8): 0802001.

[3] 罗新民, 苑春智, 张静文, 等. 激光冲击及其对金属材料组织和性能的影响[J]. 热处理, 2012, 27(1): 17-23.

    Luo Xinmin, Yuan Chunzhi, Zhang Jingwen, et al.. Laser shocking and its effects on microstructure and properties of metallic materials[J]. Heat Treatment, 2012, 27(1): 17-23.

[4] W Y Zhao, Y Z Liu, L Liu, et al.. Surface recrystallization of a gamma-TiAl alloy induced by shot peening and subsequent annealing treatments[J]. Applied Surface Science, 2013, 270: 690-696.

[5] 周建忠, 徐增闯, 黄舒, 等. 基于不同应力比下激光喷丸强化6061-T6铝合金的疲劳裂纹扩展性能研究[J]. 中国激光, 2011, 38(9): 0903006.

    Zhou Jiangzhong, Xu Zengchuang, Huang Shu, et al.. Effect of different stress ratios on fatigue crack growth in laser shot peened 6061-T6 aluminum alloy[J]. Chinses J Lasers, 2011, 38(9): 0903006.

[6] 静永娟, 王欣英, 张继. 喷丸处理对TiAl合金拉伸性能的影响[J]. 稀有金属, 2009, 33(5): 750-753.

    Jing Yongjuan, Wang Xinying, Zhang Ji. Effect of shot peening treatment on tensile properties of TiAl alloys[J]. Chinese J Rare Metal, 2009, 33(5): 750-753.

[7] 朱伟, 周建忠, 黄舒, 等. 微尺度激光喷丸纯铜数值模拟和统计优化分析[J]. 中国激光, 2011, 38(s1): 103005.

    Zhu Wei, Zhou Jianzhong, Huang Shu, et al.. Study on the numerical simulation and statistical optimization of micro-scale laser shock peening[J] Chinese J Lasers, 2011, 38(s1): 103005.

[8] 张凌峰, 熊毅, 张毅, 等. 高温锰钢在激光冲击强化作用下的微观特征[J]. 中国激光, 2011, 38(6): 0603025.

    Zhang Lingfeng, Xiong Yi, Zhang Yi, et al.. Microstructure of high manganese stell by laser shock processing[J]. Chinese J Laser, 2011, 38(6): 0603025.

[9] D Lin, M Y Zhang, C Ye, et al.. Larger scale, highly densenanoholes on surfaces by underwater laser assisted hydrogen etching near nanocrystalline boundary[J]. Applied Surface Science, 2012, 258(10): 4254-4259.

[10] H Amar, V Vignal, H Krawiec, et al.. Influence of the microstructure and laser shock processing (LSP) on the corrosion behaviour of the AA2050-T8 aluminium alloy[J]. Corrosion Science, 2011, 53(10): 3215-3221.

[11] K Y Luo, J Z Lu, L F Zhang, et al.. The microstructural mechanism for mechanical property of LY2 aluminum alloy after laser shock processing[J]. Materials & Design, 2010, 31(5): 2599-2603.

[12] S Couturier, T de Resseguier, M Hallouin, et al.. Shock profile induced by short laser pulses[J]. Journal of Applied Physics, 1996, 79(12): 9338-9342.

[13] J P Chu, J M Rigsbee, G Bana, et al.. Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel[J]. Materials Science and Engineering A, 1999, 260(1-2): 260-268.

[14] Y K Zhang, J Z Lu, X D Ren, et al.. The effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engine blades manufactured by LY2 aluminum alloy [J]. Materials and Design, 2009, 30(5): 1697-1703.

[15] K Y Luo, J Z Lu, Y K Zhang, et al.. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel[J]. Materials Science and Engineering A, 2011, 528(13-14): 4783-4788.

[16] T Thorslund, F J Kahlen, A Kar. Temperatures, pressures and stresses during laser shock processing[J]. Optics and Lasers in Engineering, 2003, 39(1): 51-71.

[17] Charles S Montross, Tao Wei, Lin Ye, et al.. Laser shock processing and its effects on microstructure and properties of metal alloy: a review[J]. International Journal of Fatigue, 2002, 24(10): 1021-1036.