[1] 孙晓敏, 刘栋, 汤海波, 等. TC17钛合金构件激光直接成形固态相变行为及显微组织［J］. 稀有金属材料与工程, 2013, 42(4): 724-729.

    Sun Xiaomin, Liu Dong, Tang Haibo, et al. Solid-state phase transformation and microstructure of laser direct manufactured TC17 titanium alloy compounds［J］. Rare Metal Materials and Engineering, 2013, 42(4): 724-729.

[2] 邹世坤, 巩水利, 郭恩明, 等. 发动机整体叶盘的激光冲击强化技术［J］. 中国激光, 2011, 38(6): 0601009.

    Zou Shikun, Gong Shuili, Guo Enming, et al. Laser peening of turbine engine integrally blade rotor［J］. Chinese J Lasers, 2011, 38(6): 0601009.

[3] 高玉魁. 不同表面改性强化处理对TC4钛合金表面完整性及疲劳性能的影响［J］. 金属学报, 2016, 52(8): 915-922.

    Gao Yukui. Influence of different surface modification treatments on surface integrity and fatigue performance of TC4 titanium alloy［J］. Acta Metallurgica Sinica, 2016, 52(8): 915-922.

[4] 陆莹, 赵吉宾, 乔红超. TiAl合金激光冲击强化工艺探索及强化机制研究［J］. 中国激光, 2014, 41(10): 1003013.

    Lu Ying, Zhao Jibin, Qiao Hongchao. Investigation of technology and strengthening mechanism research of TiAl alloy by laser shock processing［J］. Chinese J Lasers, 2014, 41(10): 1003013.

[5] Pant B K, Pavan A H V, Prakash R V, et al. Effect of laser peening and shot peening on fatigue striations during FCGR study of Ti6Al4V［J］. International Journal of Fatigue, 2016, 93: 38-50.

[6] 罗新民, 张静文, 赵广志, 等. 激光冲击强化对2A02铝合金疲劳行为的影响［J］. 中国激光, 2009, 36(12): 3323-3328.

    Luo Xinmin, Zhang Jingwen, Zhao Guangzhi, et al. Effect of laser shock strengthening on fatigue behavior of 2A02 aluminium alloy［J］. Chinese J Lasers, 2009, 36(12): 3323-3328.

[7] 张青来, 吴铁丹, 钱阳, 等. AZ91D-T6铸造镁合金激光冲击强化和高周疲劳性能研究［J］. 中国激光, 2014, 41(10): 1003008.

    Zhang Qinglai, Wu Tiedan, Qian Yang, et al. Study on high cycle fatigue properties and high shock processing of AZ91D-T6 cast magnesium alloy［J］. Chinese J Lasers, 2014, 41(10): 1003008.

[8] 聂祥樊, 何卫锋, 臧顺来, 等. 激光喷丸提高TC11钛合金高周疲劳性能的试验研究［J］. 中国激光, 2013, 40(8): 0803006.

    Nie Xiangfan, He Weifeng, Zang Shunlai, et al. Experimental study on improving high-cycle fatigue performance of TC11 titanium alloy by laser shock peening［J］. Chinese J Lasers, 2013, 40(8): 0803006.

[9] 李东霖, 何卫锋, 游熙, 等. 激光冲击强化提高外物打伤TC4钛合金疲劳强度的试验研究［J］. 中国激光, 2016, 43(7): 0702006.

    Li Donglin, He Weifeng, You Xi, et al. Experimental research on improving fatigue strength of wounded TC4 titanium alloy by laser shock processing［J］. Chinese J Lasers, 2016, 43(7): 0702006.

[10] Dai F Z, Zhou J Z, Lu J Z, et al. A technique to decrease surface roughness in overlapping laser shock peening［J］. Applied Surface Science, 2016, 370: 501-507.

[11] Liu Y G, Li H M, Li M Q. Characterization of surface layer in TC17 alloy treated by air blast shot peening［J］. Materials and Design, 2015, 65: 120-126.

[12] Wang L, Wang L, Nie Z H, et al. Evolution of residual stress, free volume, and hardness in the laser shock peened Ti-based metallic glass［J］. Materials and Design, 2016, 111: 473-481.

[13] Salimianrizi A, Foroozmehr E, Badrossmay M, et al. Effects of laser shock peening on surface properties and residaul stress of Al6061-T6［J］. Optics and Lasers in Engineering, 2016, 77: 112-117.

[14] Zhou J Z, Huang S, Sheng J, et al. Effect of repeated impacts on mechanical properties and fatigue morphologies of 6061-T6 aluminium subjected to laser peening［J］. Materials Science and Engineering: A, 2012, 539: 360-368.

[15] 刘新灵, 张峥, 陶春虎. 疲劳断口定量分析［M］. 北京: 国防工业出版社, 2010.

    Liu Xinling, Zhang Zheng, Tao Chunhu. Fatigue fractography quantitative analysis［M］. Beijing: National Defense Industry Press, 2010.

[16] 李振. 基于激光冲击的钛合金小孔构件残余应力分布及疲劳性能研究［D］. 镇江: 江苏大学, 2016.

    Li Zhen. Investigation of residual stress and fatigue performance of titanium alloy part with hole by laser shock processing［D］. Zhenjiang: Jiangsu University, 2016.

[17] Haddad E, Topper K, Pook L P. Metal fatigue［M］. London: Oxford University Press, 1974: 30-195.

[18] 吕绪明. 核电站主管道材料的疲劳行为及LBB评定研究［D］. 北京: 北京科技大学, 2015.

    Lü Xuming. Fatigue behavior and LBB assessment of primary circuit piping materials in nuclear power plants［D］. Beijing: University of Science and Technology Beijing, 2015.

[19] 张雪. 疲劳断裂纹在残余压应力场中的闭合和扩展［J］. 机械强度, 2000, 22(2): 137-139.

    Zhang Xue. Fatigue short through thickness crack closure and growth in the residual stress field［J］. Journal of Mechanical Strength, 2000, 22(2): 137-139.

[20] 张定铨, 何家文. 材料中残余应力的X射线衍射分析和作用［M］. 西安: 西安交通大学出版社, 1999.

    Zhang Dingquan, He Jiawen. X-ray diffraction analysis and effect of residual stress in materials［M］. Xi′an: Xi′an Jiaotong University Press, 1999.