[1] 徐滨士. 中国再制造工程及其进展[J]. 中国表面工程, 2010, 23(2): 1-6.

    Xu B S. Remanufacture engineering and its development in China[J]. China Surface Engineering, 2010, 23(2): 1-6.

[2] Wei S G, Cheng D B, Sundin E, et al. Motives and barriers of the remanufacturing industry in China[J]. Journal of Cleaner Production, 2015, 94: 340-351.

[3] 孙琳, 位超群, 隋欣梦, 等. SiC颗粒尺寸对TiNi基熔覆层组织与性能的影响[J]. 中国激光, 2018, 45(5): 0502002.

    Sun L, Wei C Q, Sui X M, et al. Effects of SiC particle size on microstructures and properties of TiNi based cladding layers[J]. Chinese Journal of Lasers, 2018, 45(5): 0502002.

[4] 杨宏波, 刘朝辉, 丁逸栋, 等. 热化学反应法制备Al2O3-13%TiO2陶瓷涂层及其性能研究[J]. 表面技术, 2017, 46(9): 215-222.

    Yang H B, Liu Z H, Ding Y D, et al. Preparation of Al2O3-13%TiO2 ceramic coating in the method of thermo-chemical reaction and its properties[J]. Surface Technology, 2017, 46(9): 215-222.

[5] 肖轶, 顾剑锋, 张俊喜, 等. 纳米CeO2对激光熔覆Fe/Cr3C2复合涂层组织与磨损性能的影响[J]. 材料导报, 2017, 31(22): 65-69, 84.

    Xiao Y, Gu J F, Zhang J X, et al. Effects of nano-CeO2 doping on microstructure and wear performance of laser-clad Fe/Cr3C2 alloy composite coating[J]. Materials Review, 2017, 31(22): 65-69, 84.

[6] 徐滨士, 朱绍华, 刘世参. 材料表面工程[M]. 哈尔滨: 哈尔滨工业大学出版社, 2005.

    Xu BS, Zhu SH, Liu SC. Materials surface engineering[M]. Harbin: Harbin Institute of Technology Press, 2005.

[7] Zhang Q M, He J J, Liu W J, et al. Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding[J]. Surface and Coatings Technology, 2003, 162(2/3): 140-146.

[8] Paul C P, Gandhi B K, Bhargava P, et al. Cobalt-free laser cladding on AISI type 316L stainless steel for improved cavitation and slurry erosion wear behavior[J]. Journal of Materials Engineering and Performance, 2014, 23(12): 4463-4471.

[9] van Acker K, Vanhoyweghen D, Persoons R, et al. . Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings[J]. Wear, 2005, 258(1/2/3/4): 194-202.

[10] Weng F, Yu H J, Chen C Z, et al. Fabrication of Co-based coatings on titanium alloy by laser cladding with CeO2 addition[J]. Materials and Manufacturing Processes, 2016, 31(11): 1461-1467.

[11] 张光耀, 王成磊, 高原. 稀土CeO2在6063Al表面Ni基激光熔覆中的作用机制[J]. 稀有金属材料与工程, 2016, 45(4): 1003-1007.

    Zhang G Y, Wang C L, Gao Y. Mechanism of rare earth CeO2 on the Ni-based laser cladding layer of 6063 Al surface[J]. Rare Metal Materials and Engineering, 2016, 45(4): 1003-1007.

[12] 吴东江, 陈云啸, 卢卫锋, 等. 钛合金表面直接激光熔覆Al2O3-13%TiO2涂层互熔稀释特性[J]. 稀有金属材料与工程, 2012, 41(12): 2105-2108.

    Wu D J, Chen Y X, Lu W F, et al. Dilution characters of Al2O3-13wt%TiO2 coating by direct laser cladding on titanium alloy[J]. Rare Metal Materials and Engineering, 2012, 41(12): 2105-2108.

[13] 王开明, 雷永平, 魏世忠, 等. WC含量对激光熔覆Ni基WC复合涂层组织和性能的影响[J]. 材料热处理学报, 2016, 37(7): 172-179.

    Wang K M, Lei Y P, Wei S Z, et al. Effect of WC content on microstructure and properties of laser cladding Ni-based WC composite coating[J]. Transactions of Materials and Heat Treatment, 2016, 37(7): 172-179.

[14] Tan C W, Lu Q S, Chen B, et al. Influence of laser power on microstructure and mechanical properties of laser welded-brazed Mg to Ni coated Ti alloys[J]. Optics & Laser Technology, 2017, 89: 156-167.

[15] 张洋, 宋博瀚, 薛峰. 稀释率对镍基合金激光熔覆层组织和性能的影响[J]. 应用激光, 2016, 36(3): 259-264.

    Zhang Y, Song B H, Xue F. Influence of dilution on microstructure and properties in Ni based laser clad coating[J]. Applied Laser, 2016, 36(3): 259-264.

[16] 潘浒, 赵剑峰, 刘云雷, 等. 激光熔覆修复镍基高温合金稀释率的可控性研究[J]. 中国激光, 2013, 40(4): 0403007.

    Pan H, Zhao J F, Liu Y L, et al. Controllability research on dilution ratio of nickel-based superalloy by laser cladding reparation[J]. Chinese Journal of Lasers, 2013, 40(4): 0403007.

[17] 陈菊芳, 陈国炎, 孙凌燕, 等. H13钢表面激光熔覆层稀释率及强化效果研究[J]. 激光技术, 2017, 41(4): 596-601.

    Chen J F, Chen G Y, Sun L Y, et al. Investigation of dilution ratio and strengthening effect of laser cladded coating on H13 steel[J]. Laser Technology, 2017, 41(4): 596-601.

[18] Adebiyi D I. Popoola A P I. Mitigation of abrasive wear damage of Ti-6Al-4V by laser surface alloying[J]. Materials & Design, 2015, 74: 67-75.

[19] Yu X X, Yin D F, Yu Z M, et al. Effects of cerium addition on solidification behaviour and intermetallic structure of novel Al-Cu-Li alloys[J]. Rare Metal Materials and Engineering, 2016, 45(6): 1423-1429.

[20] Chen R, Xu Q Y, Liu B C. Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary aluminum alloys[J]. Computational Materials Science, 2015, 105: 90-100.

[21] Shu X Y, Hu L L, Li G F, et al. High-temperature oxidation resistance of the Ni60Ti alloy: An experimental and first-principles study[J]. Journal of Alloys and Compounds, 2017, 706: 297-304.

[22] 晁明举, 梁二军, 赵栋. TiO2对45 #钢表面激光熔覆镍基合金的影响 [J]. 中国激光, 2003, 30(10): 947-952.

    Chao M J, Liang E J, Zhao D. Effect of TiO2 on the laser cladding layers of Ni-based alloy on 45# steel[J]. Chinese Journal of Lasers, 2003, 30(10): 947-952.

[23] 李晶, 李红, 于化东, 等. 碳钢超疏水表面制备及其耐腐蚀性研究[J]. 中国机械工程, 2016, 27(23): 3241-3246.

    Li J, Li H, Yu H D, et al. Research on preparation and corrosion resistance of superhydrophobic surfaces on carbon steels[J]. China Mechanical Engineering, 2016, 27(23): 3241-3246.

[24] Liu Y X, Bian D, Zhao Y W, et al. Anti-corrosion performance of chemically bonded phosphate ceramic coatings reinforced by nano-TiO2[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 86: 208-214.

[25] 吕学奇, 陈业新. 氢陷阱对纯净钢SM490B中氢扩散行为的作用[J]. 上海金属, 2013, 35(5): 14-18.

    Lü X Q, Chen Y X. Effect of hydrogen traps on diffusion of hydrogen in SM490B clean steel[J]. Shanghai Metals, 2013, 35(5): 14-18.