激光作用于金属材料瞬态温度场的数值模拟
[1] 李亚江, 李嘉宁.激光焊接/切割/熔覆技术[M].北京: 化学工业出版社, 2016.(Li Yajiang, Li Jianing. Laser welding/cutting/cladding. Beijing: Chemical Industry Press, 2016)
[2] 史春元, 于启湛.异种金属的焊接[M].北京: 机械工业出版社, 2012.(Shi Chunyuan, Yu Qizhan. Welding of dissimilar metals. Beijing: China Machine Press, 2012)
[3] Shi Wenqing, Wang Wenhua, Huang Yaling. Laser micro-welding of Cu-Al dissimilar metals[J]. Int J Adv Manuf Technol, 2015, 85(1): 185-189.
[4] Pierpaolo C, Antonello A, Palazzo G S, et al. Microstructural aspects in Al-Cu dissimilar joining by FSW[J]. Int J Adv Manuf Technol, 2015, 79(5): 1109-1116.
[5] 黄昆.固体物理[M].北京: 高等教育出版社, 2016.(Huang Kun. Solid state physics. Beijing: Higher Education Press, 2016)
[6] 徐洲, 赵连城.金属固态相变原理[M].北京: 科学出版社, 2013.(Xu Zhou, Zhao Liancheng. Metal solid phase change principle. Beijing: Science Press, 2013)
[7] Mannabosco I, Forro P, Bonollo F, et al. An investigation of fusion zone microstructures in electron beam welding of copper-stainless steel[J]. Materials Science and Engineering A, 2006, 424(1): 163-173.
[8] Olabi A G, Alsinani F O, Alabdulkarim A A, et al. Optimizing the CO2 laser welding process for dissimilar materials[J]. Opt Lasers Eng, 2013, 51(1): 832-839.
[11] 王馨露.激光温度场分布计算研究[D].长春: 东北师范大学, 2014: 10-13.(Wang Xinlu. Study on laser temperature distribution calculation. Changchun: Northeast Normal University, 2014: 10-13)
[12] 王铎, 霍文灿, 张锦生.液态模锻的凝固时间及其方程[J].金属科学与工艺, 1987, 6(4): 85-91.(Wang Duo, Huo Wencan, Zhang Jinsheng. Solidification time and its equation in squeezing casting. Metal Science & Technology, 1987,6(4): 85-91)
[13] 李永强, 熊守美, 彭劲松.凝固过程温度场的分区域计算[J].清华大学学报, 2003, 43(2): 211-213.(Li Yongqiang, Xiong Shoumei, Peng Jinsong. Zone partitioning calculational technique for solidification simulation during sand casting. Tsinghua University, 2003, 43(2): 211-213)
[14] 周丽丽.液态金属铅凝固过程中微观结构演变特性的模拟研究[D].长沙: 湖南大学, 2012: 27-33.(Zhou Lili. Simulation study on solidification processes and microstructure evolution characteristics of liquid metal lead. Changsha: Hunan University, 2012: 27-33)
[15] 程家增.爆破过程高速摄像方法研究[D].武汉: 武汉理工大学, 2010: 40-49.(Cheng Jiazeng. The research of high-speed photograph technique in blast engineering. Wuhan: Wuhan University of Technology, 2010: 40-49)
[16] 孟宣宣.基于高速摄像技术的光纤激光焊接过程研究[D].武汉: 华中科技大学, 2011: 32-37.(Meng Xuanxuan. Study on the process of fiber laser welding based on the technology of high-speed camera. Wuhan: Huazhong University of Science and Technology, 2011: 32-37)
[17] 刘永志.温度场的有限元数值模拟及其在塑件和磨具冷却分析中的应用[D]. 郑州: 郑州大学, 2003: 34-38.(Liu Yongzhi. The numerical simulation on temperature field by FEM and its application to the cooling analysis of plastic part and mould. Zhengzhou: Zhengzhou University, 2003: 34-38)
[18] 毕艳霞.T型接头焊接温度场与应力场的数值模拟[D].杭州: 浙江大学, 2007: 20-27.(Bi Yanxia. Numerical simulation of welding temperature field and stress field of T joint. Hangzhou: Zhejiang University, 2007: 20-27)
[19] 薛志清.铜-铝异种金属激光熔池流体动力学模拟与焊缝组织特征研究[D].天津: 天津大学, 2013: 50-68.(Xue Zhiqing. Fluid dynamics simulation of laser welded Cu/Al molten pool and research on joint microstructure characteristics. Tianjin: Tianjin University, 2013: 50-68)
[20] Charles Kittel. Introduction to solid state physics[M]. Wiley: Wiley Press, 2010.
黄江, 师文庆, 谢玉萍, 安芬菊, 李永强. 激光作用于金属材料瞬态温度场的数值模拟[J]. 强激光与粒子束, 2018, 30(2): 029001. Huang Jiang, Shi Wenqing, Xie Yuping, An Fenju, Li Yongqiang. Numerical simulation of transient temperature field under the interaction between laser and metal materials[J]. High Power Laser and Particle Beams, 2018, 30(2): 029001.