[1] 靖冠乙, 魏恺文, 王泽敏, 等. 激光选区熔化成形 S-04钢的组织及性能［J］. 激光与光电子学进展, 2016, 53(11): 111404.

    Jing G Y, Wei K W, Wang Z M, et al. Microstructure and mechanical property of S-04 steel by selective laser melting［J］. Laser & Optoelectronics Progress, 2016, 53(11): 111404.

[2] 丁利, 李怀学, 王玉岱, 等. 热处理对激光选区熔化成形316不锈钢组织与拉伸性能的影响［J］. 中国激光, 2015, 42(4): 0406003.

    Ding L, Li H X, Wang Y D, et al. Heat treatment on microstructure and tensile strength of 316 stainless steel by selective laser melting［J］. Chinese Journal of Lasers, 2015, 42(4): 0406003.

[3] Hu Z H, Zhu H H, Zhang H, et al. Experimental investigation on selective laser melting of 17-4PH stainless steel［J］. Optics & Laser Technology, 2017, 87: 17-25.

[4] Gu D D, Hagedorn Y C, Meiners W, et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium［J］. Acta Materialia, 2012, 60(9): 3849-3860.

[5] Wang Z M, Guan K, Gao M, et al. The microstructure and mechanical properties of deposited-IN718 by selective laser melting［J］. Journal of Alloys and Compounds, 2012, 513: 518-523.

[6] Thijs L, Kempen K, Kruth J P, et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder［J］. Acta Materialia, 2013, 61(5): 1809-1819.

[7] 刘威, 刘婷婷, 廖文和, 等. 选择性激光熔融钴铬合金成形工艺研究［J］. 中国激光, 2015, 42(5): 0503001.

    Liu W, Liu T T, Liao W H, et al. Study on selective laser melting forming process of cobalt chromium alloy［J］. Chinese Journal of Lasers, 2015, 42(5): 0503001.

[8] 宋长辉, 杨永强, 王赟达, 等. CoCrMo合金激光选区熔化成型工艺及其性能研究［J］. 中国激光, 2014, 41(6): 0603001.

    Song C H, Yang Y Q, Wang Y D, et al. Research on process and property of CoCrMo alloy directly manufactured by selective laser melting［J］. Chinese Journal of Lasers, 2014, 41(6): 0603001.

[9] Louvis E, Fox P, Sutcliffe C J. Selective laser melting of aluminium components［J］. Journal of Materials Processing Technology, 2011, 211(2): 275-284.

[10] 董鹏, 李忠华, 严振宇, 等. 铝合金激光选区熔化成形技术研究现状［J］. 应用激光, 2015, 35(5): 607-611.

    Dong P, Li Z H, Yan Z Y, et al. Research status of selective laser melting of aluminum alloys［J］. Applied Laser, 2015, 35(5): 607-611.

[11] 戴圣龙, 张坤, 杨守杰, 等. 先进航空铝合金材料与应用［M］. 北京: 国防工业出版社, 2012: 1-9.

    Dai S L, Zhang K, Yang S J, et al. Advanced aeronautical aluminum alloy materials technology and application［M］. Beijing: National Defend Industry Press, 2012: 1-9.

[12] Bartkowiak K, Ullrich S, Frick T, et al. New developments of laser processing aluminium alloys via additive manufacturing technique［J］. Physics Procedia, 2011, 12(1): 393-401.

[13] Karg M, Ahuja B, Schaub A, et al. Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by laser beam melting in powder bed［C］. 8th International WLT Conference on Lasers in Manufacturing, 2015: 22-25.

[14] Karg M C H, Ahuja B, Wiesenmayer S, et al. Effects of process conditions on the mechanical behavior of aluminium wrought alloy EN AW-2219 (AlCu6Mn) additively manufactured by laser beam melting in powder bed［J］. Micromachines, 2017, 8(1): 23.

[15] Karg M C H, Ahuja B, Kuryntsev S, et al. Processability of high strength aluminium-copper alloys AW-2022 and 2024 by laser beam melting in powder bed［C］. Proceedings of the Solid Freeform Fabrication Symposium, 2014: 4-6.

[16] 张虎, 聂小佳, 朱海红,等. 激光选区熔化成形高强Al-Cu-Mg合金研究［J］. 中国激光, 2016, 43(5): 0503007.

    Zhang H, Nie X J, Zhu H H, et al. Study on high strength Al-Cu-Mg alloy fabricated by selective laser melting［J］. Chinese Journal of Lasers, 2016, 43(5): 0503007.

[17] Zhang H H, Zhu H, Nie X J, et al. Effect of zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy［J］. Scripta Materialia, 2017, 134: 6-10.

[18] Kaufmann N, Imran M, Wischeropp T M, et al. Influence of process parameters on the quality of aluminium alloy EN AW 7075 using selective laser melting (SLM)［J］. Physics Procedia, 2016, 83: 918-926.

[19] Reschetnik W, Brüggemann J P, Aydinz M E, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy［J］. Procedia Structural Integrity, 2016, 2: 3040-3048.

[20] Sistiaga M L M, Mertens R, Vrancken B, et al. Changing the alloy composition of Al7075 for better processability by selective laser melting［J］. Journal of Materials Processing Technology, 2016, 238: 437-445.

[21] Martin J H, Yahata B D, Hundley J M, et al. 3D printing of high-strength aluminium alloys［J］. Nature, 2017, 549(7672): 365-369.

[22] Qi T, Zhu H, Zhang H, et al. Selective laser melting of Al7050 powder:melting mode transition and comparison of the characteristics between the keyhole and conduction mode［J］. Materials & Design, 2017, 135: 257-266.

[23] Spierings A B, Dawson K, Voegtlin M, et al. Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting［J］. CIRP Annals, 2016, 65(1): 213-216.

[24] Spierings A B, Dawson K, Kern K, et al. SLM-processed Sc-and Zr-modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment［J］. Materials Science and Engineering: A, 2017, 701: 264-273.

[25] Buchbinder D, Meiners W, Wissenbach K, et al. Selective laser melting of aluminium die-cast alloy［C］. Fraunhofer Direct Digital Manufacturing Conference, 2014: 6.

[26] Spierings A B, Dawson K, Heeling T, et al. Microstructural features of Sc-and Zr-modified Al-Mg alloys processed by selective laser melting［J］. Materials & Design, 2017, 115: 52-63.

[27] Li R D, Wang M B, Yuan T C, et al. Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: processing, microstructure, and properties［J］. Powder Technology, 2017, 319: 117-128.