[1] 杨勇进, 张晓云, 孙志华, 等. TC4钛合金厚板电偶腐蚀与防护研究[J]. 装备环境工程, 2016, 13(4): 149-156.

    Yang Y J, Zhang X Y, Sun Z H, et al. Galvanic corrosion and protection of TC4 titanium alloy thick plate[J]. Equipment Environmental Engineering, 2016, 13(4): 149-156.

[2] 张彩珍, 杨健, 魏磊, 等. 航空发动机钛合金叶片喷丸强化残余应力研究[J]. 表面技术, 2016, 45(4): 208-212.

    Zhang C Z, Yang J, Wei L, et al. Shot-peened residual stress of aeroengine titanium alloy blades[J]. Surface Technology, 2016, 45(4): 208-212.

[3] 要玉宏, 刘江南, 马丽, 等. 铸造TC4钛合金细节疲劳强度DFRcutoff的研究[J]. 稀有金属材料与工程, 2009, 38(9): 1530-1532.

    Yao Y H, Liu J N, Ma L, et al. Detail fatigue rating cutoff values of casting TC4 alloy[J]. Rare Metal Materials and Engineering, 2009, 38(9): 1530-1532.

[4] 高玉魁. 喷丸强化对TC4钛合金组织结构的影响[J]. 稀有金属材料与工程, 2010, 39(9): 1536-1539.

    Gao Y K. Effect of shot-peening on microstructure of TC4 titanium alloy[J]. Rare Metal Materials and Engineering, 2010, 39(9): 1536-1539.

[5] 赵西洋, 陈晓秀, 孟海英. 喷丸强化技术在某型作动筒延寿修理中的应用[J]. 装备环境工程, 2018, 15(12): 87-90.

    Zhao X Y, Chen X X, Meng H Y. Application of shot peening technology on lifetime extension repair of an actuator cylinder[J]. Equipment Environmental Engineering, 2018, 15(12): 87-90.

[6] Wu Q, Xie D J, Jia Z M, et al. Effect of shot peening on surface residual stress distribution of SiCp/2024Al[J]. Composites Part B: Engineering, 2018, 154: 382-387.

[7] 汪军, 李民, 汪静雪, 等. 激光冲击强化对304不锈钢疲劳寿命的影响[J]. 中国激光, 2019, 46(1): 0102003.

    Wang J, Li M, Wang J X, et al. Effects of laser shock processing on fatigue life of 304 stainless steel[J]. Chinese Journal of Lasers, 2019, 46(1): 0102003.

[8] 陈彬, 张兴权. 激光冲击强化对回转支承用钢42CrMo表面性能的影响[J]. 表面技术, 2019, 48(2): 62-68.

    Chen B, Zhang X Q. Effect of laser shock peening on surface performance of slewing bearing steel 42CrMo[J]. Surface Technology, 2019, 48(2): 62-68.

[9] 黄舒, 王作伟, 盛杰, 等. 激光喷丸强化IN718合金孔周表面残余主应力分布特性[J]. 中国激光, 2017, 44(2): 0202004.

    Huang S, Wang Z W, Sheng J, et al. Characteristics of residual principal stress distribution on surface around hole of IN718 alloy subjected to laser peening[J]. Chinese Journal of Lasers, 2017, 44(2): 0202004.

[10] 曹子文, 张杰, 车志刚, 等. 激光冲击与喷丸复合强化TC17钛合金表层残余应力研究[J]. 表面技术, 2018, 47(11): 80-84.

    Cao Z W, Zhang J, Che Z G, et al. Residual stresses of compound strengthening case on TC17 titanium alloy by laser peening and shot peening[J]. Surface Technology, 2018, 47(11): 80-84.

[11] Kumar S A, Sundar R. Raman S G S, et al. Influence of laser peening on microstructure and fatigue lives of Ti-6Al-4V[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(10): 3111-3117.

[12] Sun R J, Li L H, Zhu Y, et al. Fatigue of Ti-17 titanium alloy with hole drilled prior and post to laser shock peening[J]. Optics & Laser Technology, 2019, 115: 166-170.

[13] 杜永, 马玉娥, 苟磊, 等. 激光强化后7050凹槽铝板的残余应力分布规律研究[J]. 西北工业大学学报, 2019, 37(4): 643-649.

    Du Y, Ma Y E, Gou L, et al. Study on residual stress distribution of 7050 aluminum sheet with groove after laser shock peening[J]. Journal of Northwestern Polytechnical University, 2019, 37(4): 643-649.

[14] 田绪亮, 周建忠, 李京, 等. 深冷激光喷丸强化对2024-T351铝合金微观组织的影响[J]. 中国激光, 2019, 46(9): 0902004.

    Tian X L, Zhou J Z, Li J, et al. Effect of cryogenic laser peening on microstructure of 2024-T351 aluminum alloy[J]. Chinese Journal of Lasers, 2019, 46(9): 0902004.

[15] 中国航空工业总公司. 金属材料细节疲劳额定强度截止值DFRcutoff试验方法: HB 7110—1994[S]. 北京: 中国工业标准出版社.

    Aviation Industry Corporation of China, Limited. Test method for cut-off value of detail fatigue rated strength of metallic materials: HB 7110—1994[S]. Beijing: Chinese Industrial Standards Press, 1994.

[16] Akita K, Hayashi K, Takeda K, et al. 1(4): SMM0029[J]. neutron diffraction. Mechanical Engineering Journal, 2014.

[17] 高玉魁. 不同表面改性强化处理对TC4钛合金表面完整性及疲劳性能的影响[J]. 金属学报, 2016, 52(8): 915-922.

    Gao Y K. Influence of different surface modification treatments on surface integrity and fatigue performance of TC4 titanium alloy[J]. Acta Metallurgica Sinica, 2016, 52(8): 915-922.

[18] 蒋素琴, 周建忠, 吴建华, 等. 激光喷丸强化ZK60变形镁合金的疲劳性能研究[J]. 激光与光电子学进展, 2012, 49(8): 080413.

    Jiang S Q, Zhou J Z, Wu J H, et al. Research on fatigue properties of ZK60 wrought magnesium alloy treated by laser shot peening[J]. Laser & Optoelectronics Progress, 2012, 49(8): 081403.

[19] Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 1985, 21(1): 31-48.

[20] 蒋聪盈, 黄露, 王婧辰, 等. TC4钛合金激光冲击强化与喷丸强化的残余应力模拟分析[J]. 表面技术, 2016, 45(4): 5-9, 52.

    Jiang C Y, Huang L, Wang J C, et al. Simulation analysis of the residual stress field of TC4 Ti alloy under laser shock peening and shot peening[J]. Surface Technology, 2016, 45(4): 5-9, 52.

[21] 周建忠, 杨小东, 黄舒, 等. 双面激光喷丸强化ZK60镁合金的残余应力数值研究[J]. 中国激光, 2010, 37(7): 1850-1855.

    Zhou J Z, Yang X D, Huang S, et al. Residual stress field of ZK60 specimen with central hole induced by both-side laser shot peening[J]. Chinese Journal of Lasers, 2010, 37(7): 1850-1855.

[22] 胡永祥, 姚振强, 胡俊. 激光冲击强化残余应力场的数值仿真分析[J]. 中国激光, 2006, 33(6): 846-851.

    Hu Y X, Yao Z Q, Hu J. Numerical simulation of residual stress field for laser shock processing[J]. Chinese Journal of Lasers, 2006, 33(6): 846-851.

[23] Zhang X Q, Chen L S, Li S Z, et al. Investigation of the fatigue life of pre- and post-drilling hole in dog-bone specimen subjected to laser shot peening[J]. Materials & Design, 2015, 88: 106-114.