变焦曲线拟合方法的比较与研究

高天元; 侯振岩

doi:doi:10.3788/gzxb20134201.0094

光子学报, 2013, 42 (1): 94, 网络出版: 2013-01-16

变焦曲线拟合方法的比较与研究

Comparison and Research of Zoom Curve Fitting Methods

论文大纲

高天元 ^*侯振岩

作者单位

长春理工大学光电工程学院，长春 130022

变焦曲线曲线拟合动态光学 ZEMAX宏 Zoom curve Curve fitting Dynamic optics CODE V CODE V ZEMAX macro

摘要

在机械补偿变焦距光学系统中，通过利用变焦曲线控制变倍组与补偿组的移动来达到变焦目的.因此，为使变焦距光学系统在变焦过程中能够始终成像清晰且稳定，拟合出良好的变焦曲线是十分必要的.本文运用动态光学理论、CODE V和ZEMAX宏三种方法分别对一个20倍变焦距光学系统进行变焦曲线拟合，得到相应的运动曲线方程.根据所得到的三组曲线方程，随机选取若干变焦位置点，分别对这些位置点的光学系统离焦量、中心视场MTF和边缘视场MTF进行评价.数据分析表明，动态光学理论拟合出的变焦曲线在满足系统要求前提下更能够保证像面的稳定性.

Abstract

In mechanical compensation zoom optical system, the zoom can be achieved through the zoom curve to control the movement of the zoom group and the compensation group. Therefore, it is very necessary to fit a good zoom curve to make the imaging of zoom optical system clear and stable during the zoom process. In this paper, the dynamic optical theory, CODE V and ZEMAX macro are used individually to fit zoom curve for a 20× zoom optical system, then the corresponding movement curve equations can be generated. According to the three groups of curve equations, several random zoom position points are selected and evaluated in defocus and MTF of central field and edge field. Through the analysis of the data, the zoom curve fitted by the dynamic optical theory can meet the system requirements, and it is better to ensure the image plane stable.

参考文献

[1] 王平,张葆,程志峰,等.变焦距镜头凸轮结构优化设计［J］.光学精密工程,2010,18(4)：893-898.

WANG Ping, ZHANG Bao, CHENG Zhi-feng, et al. Optimal design of cam structure of zoom lens ［J］ . Optics and Precision Engineering, 2010, 18(4)： 893-898.

[2] 李零印，王一凡，薛育.基于数字信号处理技术的连续变焦镜头控制系统设计［J］.光子学报，2011,40(9):1346-1350.

LI Ling-yin, WANG Yi-fan, XUE Yu. Design of zoom lens system based on digital signal processing［J］. Acta Photonica Sinica, 2011, 40(9): 1346-1350.

[3] 田海霞,杨建峰,马小龙.可见光变焦距电视光学系统设计［J］.光子学报,2008,37(9):1797-1799.

TIAN Hai-xia, YANG Jian-feng, MA Xiao-long. Design for visible video zoom optical system［J］. Acta Photonica Sinica, 2008, 37(9): 1797-1799.

[4] 程珂,周泗忠,张恒金.短焦距变焦物镜设计［J］.光子学报, 2005,34(12):1825-1828.

CHENG Ke, ZHOU Si-zhong, ZHANG Heng-jin. Design of a short focal-length zoom system［J］. Acta Photonica Sinica, 2005, 34(12): 1825-1828.

[5] 王波.光学镜头中的驱动技术研究［J］.机械工程师,2007,2:84-86.

WANG Bo. The driving technology in optical lens［J］. Design and Calculation, 2007, 2: 84-86.

[6] 王志坚,郑建平.动态光学系统的物象共轭理论［J］.长春光学精密机械学院学报,1992,15(2): 1-13.

WANG Zhi-jian, ZHENG jian-ping. The object-image conjugate theory of optical systems and optical elements in motion［J］. Journal of Changchun Institute of Optics and Fine Mechanics, 1992, 15(2): 1-13.

[7] 白素平,王春艳,庞春颖.基于坐标变换的动态光学成象性质研究［J］.光子学报,2001,30(7):846-850.

BAI Su-ping, WANG Chun-yan, PANG Chun-ying. Imaging features of optics system in motion based on coordinate transformation［J］. Acta Photonica Sinica, 2001, 30(7): 846-850.

[8] 王志坚,王鹏,刘智颖.工程光学原理［M］.北京：国防工业出版社,2010: 170-171.

[9] 陈鑫,付跃刚. 变焦系统凸轮曲线的优化设计［J］.应用光学, 2008,29(1):45-47.

CHEN Xin, FU Yue-gang. Optimal design of cam curve for zoom system［J］. Journal of Applied Optic, 2008, 29(1): 45-47.

[10] 王春艳,王志坚,周庆才. 应用动态光学理论求解变焦光学系统补偿组凸轮曲线［J］. 光学学报, 2006, 6(6):891-894.

WANG Chun-yan, WANG Zhi-jian, ZHOU Qing-cai. Applies the dynamic optics theory solution zoom optical system to compensate the group cam curve［J］. Acta Optica Sinica, 2006, 6(6): 891-894.

高天元, 侯振岩. 变焦曲线拟合方法的比较与研究[J]. 光子学报, 2013, 42(1): 94. GAO Tian-yuan, HOU Zhen-yan. Comparison and Research of Zoom Curve Fitting Methods[J]. ACTA PHOTONICA SINICA, 2013, 42(1): 94.

变焦曲线拟合方法的比较与研究

关于本站 Cookie 的使用提示

全站搜索

变焦曲线拟合方法的比较与研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索