镀镍钴粒在压水堆服役的可行性研究
[1] Zhu Libing, Yang Bo, Mei Qiliang, et al . Research on 60Co production in CANDU-6 reactor[J]. Nuclear Techniques (核技术), 2010, 33(2): 106-111 (in Chinese).
[2] Xue Na, Wang Bingheng, Mao Yawei. Research on shielding of high-capacity cobalt source transport cask[J]. Atomic Energy Science and Technology (原子能科学技术), 2015, 49(7): 1298-1302 (in Chinese).
[3] Lima-Neto Pedro de, Correia Adriana N, Santana Renato A C, et al . Morphological, structural, microhardness and electrochemical characterisations of electrodeposited Cr and Ni-W coatings[J]. Electrochimica Acta , 2010, 55(6): 2078-2086.
[4] Shen Y F, Xue W Y, Liu Z Y, et al . Nanoscratching deformation and fracture toughness of electroless Ni-P coatings[J]. Surface and Coatings Technology , 2010, 205(2): 632-640.
[5] Sunwang N, Wangyao P, Boonyongmaneerat Y. The effects of heat treatments on hardness and wear resistance in Ni-W alloy coatings[J]. Surface and Coatings Technology , 2011, 20(6): 1096-1101.
[6] Theeratatpong K, Danchaivijit S, Boonyongmaneerat Y. Effects of Co content and heat treatment on mechanical properties of electrolessly deposited Ni-Co-P alloys[J]. Surface and Interface Analysis , 2014, 4(4): 276-282.
[7] Hu Jianjiang. Electroplating Nickel Technology for Stainless Steel Fine Wire (不锈钢细丝表面电镀镍)[D]. Shenyang: Master Thesis of Northeastern University, 2008 (in Chinese).
[8] Li Weisheng. Material Design and Properties Investigation of Ni Plating Coating on the Surface of Low Carbon Steel (低碳钢表面电沉积镍涂层材料设计及其性能研究)[D]. Xiamen: Master Thesis of Xiamen University, 2008 (in Chinese).
张勇. 镀镍钴粒在压水堆服役的可行性研究[J]. 量子电子学报, 2017, 34(4): 495. ZHANG Yong. Feasibility of nickel electroplated Co-pellets working in pressurized water reactor[J]. Chinese Journal of Quantum Electronics, 2017, 34(4): 495.