[1] Limpert J, Roser F, Schreiber T, et al. High-power ultrafast fiber laser systems. IEEE Journal of Selected Topics in Quantum Electronics, 2006, 12(2): 233-244

[2] Pask H M, Carman R J, Hanna D C, et al. Ytterbium-doped silica fiber lasers: versatile sources for the 1-1.2 mm region. IEEE Journal of Selected Topics in Quantum Electronics, 1995, 1(1): 2-13

[3] Xue D, Lou Q H, Zhou J, et al. A 110-W fiber laser with homemade double-clad fiber. Chinese Optics Letters, 2005, 3(6): 345-347

[4] Lou Q H, Zhu J Q, Zhou J, et al. 133-W pulsed high average power fiber amplifier with double clad fiber. Chinese Journal of Lasers, 2005, 32(4): 552 (in Chinese)

[5] Kong L F, Lou Q H, Zhou J, et al. 133-W pulsed fiber amplifier with large-mode-area fiber. Optical Engineering, 2006, 45(1): 010502

[6] Zhou J, Lou Q H, Zhu J Q, et al. A continuous-wave 714-W fiber laser with China-made large-mode-area double-clad fiber. Acta Optica Sinica, 2006, 26(7): 1119-1120 (in Chinese)

[7] Galvanauskas A. High power fiber lasers. Optics & Photonics News, 2004, 15(7): 42-47

[8] Jeong Y, Sahu J K, Payne D N, et al. Ytterbium-doped largecore fiber laser with 1.36 kW continuous-wave output power. Optics Express, 2004, 25(12): 6088-6092

[9] Offerhaus H L, Broderick N G, Richardson D J, et al. Highenergy single-transverse-mode Q-switched fiber laser based on a multimode large-mode-area erbium-doped fiber. Optics Letters, 1998, 23(21): 1683-1685

[10] Sousa J M, Okhotnikov O G. Multimode Er-doped fiber for single-transverse-mode amplification. Applied Physics Letters, 1999, 74(11): 1528-1530

[11] Griebner U, Koch R, Schonnagel H, et al. Efficient laser operation with nearly diffraction-limited output from a diode-pumped heavily Nd-doped multimode fiber. Optics Letters, 1996, 21(4): 266-268

[12] Alvarez-Chavez J A, Grudinin A B, Nilsson J, et al. Mode selection in high power cladding pumped fibre lasers with tapered section. Conference on Lasers and Electro-Optics, OSA, Washington, D C, 1999: 247-248

[13] Jeong H, Choi S, Oh K. Continuous wave single transverse mode laser oscillation in a Nd-doped large core double clad fiber cavity with concatenated adiabatic tapers. Optics Communications, 2002, 213(1-3): 33-37

[14] Jeong H, Oh K, Seo H S, et al. Enhancement of butt-coupling pump efficiency in a new Nd-doped large core double clad fiber laser cavity adiabatically tapered at both ends. Conference on Lasers and Electro-Optics, 2001, Technical Digest, paper CWC3: 320-321

[15] Koplow J P, Kliner D A V, Goldberg L. Single-mode operation of a coiled multimode fiber amplifier. Optics Letters, 2000, 25(7): 442-444

[16] Li L B, Lou Q H, Zhou J, et al. High power Low-order modes operation of a multimode fiber laser Chin. Optics Letters, 2007, 5(4): 221-222

[17] Carter A, Samson B. New technology advances applications for high-power fiber lasers. Military & Aerospace Electronics, 2005, 16(7): 16-21

[18] Marcuse D. Curvature loss formula for optical fibers. Journal of the Optical Society of America, 1976, 66(3): 216-220

[19] Marcuse D. Field deformation and loss caused by curvature of optical fibers. Journal of the Optical Society of America, 1976, 66(4): 311-320

[20] Sakai J, Kimura T. Bending loss of propagation modes in arbitrary-index profile optical fibers. Applied Optics, 1978, 17(10): 1499-1506

[21] Lu B D. Propagation and Control ofHigh-Power Lasers. Beijing: National Defence Industry Press, 1999, 64-70 (in Chinese)

[22] Johnston T F. Beam propagation (M2) measurement made as easy as it gets: the four-cuts method. Applied Optics, 1998, 37(21): 4840-4850