[1] 姚玉峰, 路士州, 刘亚欣, 等. 微量液体自动分配技术研究综述［J］. 机械工程学报, 2013, 49(14): 140-153.

    YAO Y F, LU SH ZH, LIU Y X, et al.. Research on automated micro-liquid dispensing technology［J］. Journal of Mechanical Engineering, 2013, 49(14): 140-153.(in Chinese)

[2] 张勤, 徐策, 徐晨影, 等. 超微量点胶方法与实验［J］. 光学 精密工程, 2013, 21(8): 2071-2078.

    ZHANG Q, XU C, XU CH Y, et al.. Approach and experiment of ultra-micro dispensing［J］. Opt. Precision Eng., 2013, 21(8): 2071-2078.(in Chinese)

[3] KUNCHALA P, KAPPAGANTULA K. 3D printing high density ceramics using binder jetting with nanoparticle densifiers［J］. Materials & Design, 2018, 155: 443-450.

[4] 孙道恒, 高俊川, 杜江, 等. 微电子封装点胶技术的研究进展［J］. 中国机械工程, 2011, 22(20): 2513-2519.

    SUN D H, GAO J CH, DU J, et al.. Advances in fluid dispensing technology for micro-electronics packaging［J］. China Mechanical Engineering, 2011, 22(20): 2513-2519.(in Chinese)

[5] 姚玉峰, 路士州, 刘亚欣, 等. 微量液体自动分配技术研究综述［J］. 机械工程学报, 2013, 49(14): 140-153.

    YAO Y F, LU SH ZH, LIU Y X, et al.. Research on automated micro-liquid dispensing technology［J］. Journal of Mechanical Engineering, 2013, 49(14): 140-153.(in Chinese)

[6] 史亚莉, 李福东, 杨鑫, 等. 用于微胶接的pL级点胶方法［J］. 光学 精密工程, 2012, 20(12): 2744-2750.

    SHI Y L, LI F D, YANG X, et al.. PL class adhesive dispensing approach for micro bonding［J］. Opt. Precision Eng., 2012, 20(12): 2744-2750.(in Chinese)

[7] KHAN S, NGUYEN T P, LUBEJ M, et al.. Low-power printed micro-hotplates through aerosol jetting of gold on thin polyimide membranes［J］. Microelectronic Engineering, 2018, 194: 71-78.

[8] NGUYEN Q H, HAN Y M, CHOI S B, et al.. Dynamic characteristics of a new jetting dispenser driven by piezostack actuator［J］. IEEE Transactions on Electronics Packaging Manufacturing, 2008, 31(3): 248-259.

[9] 路崧, 江海, 顾守东, 等. 液压式压电驱动喷射点胶阀设计与实验［J］. 四川大学学报(工程科学版), 2015, 47(3): 167-173.

    LU S, JIANG H, GU SH D, et al.. Experiment and design for the hydraumatic and piezoelectric driven jet dispensing value［J］. Journal of Sichuan University(Engineering Science Edition), 2015, 47(3): 167-173.(in Chinese)

[10] 顾守东, 杨志刚, 江海, 等. 压电驱动液压放大式喷射系统［J］. 光学 精密工程, 2015, 23(6): 1627-1634.

    GU SH D, YANG ZH G, JIANG H, et al.. Piezoelectric driven hydraulic amplification jetting system［J］. Opt. Precision Eng., 2015, 23(6): 1627-1634.(in Chinese)

[11] DENG G L, CUI W J, ZHOU C, et al.. A piezoelectric jetting dispenser with a pin joint［J］. Optik, 2018, 175: 163-171.

[12] MITCHELL-SMITH J, SPEIDEL A, BISTEROV I, et al.. Electrolyte multiplexing in electrochemical jet processing［J］. Procedia CIRP, 2018, 68: 483-487.

[13] 余跃庆, 李清清. 一种新型柔性铰链的设计、制作与试验研究［J］. 机械工程学报, 2018, 54(13): 79-85.

    YU Y Q, LI Q Q. On the design, manufacturing and experiment of a new type flexural joint［J］. Journal of Mechanical Engineering, 2018, 54(13): 79-85.(in Chinese)

[14] 李耀, 吴洪涛, 杨小龙, 等. 圆弧柔性铰链的优化设计［J］. 光学 精密工程, 2018, 26(6): 1370-1379.

    LI Y, WU H T, YANG X L, et al.. Optimization design of circular flexure hinges［J］. Opt. Precision Eng., 2018, 26(6): 1370-1379.(in Chinese)

[15] 胡俊峰, 杨展宏. 尺蠖式直线微驱动器的设计［J］. 光学 精密工程, 2018, 26(1): 122-131.

    HU J F, YANG ZH H. A novel inchworm linear micro actuator［J］. Opt. Precision Eng., 2018, 26(1): 122-131.(in Chinese)

[16] 胡俊峰, 徐贵阳, 郝亚洲. 基于响应面法的微操作平台多目标优化［J］. 光学 精密工程, 2015, 23(4): 1096-1104.

    HU J F, XU G Y, HAO Y ZH. Multi-objective optimization of micro-manipulation stage based on response surface method［J］. Opt. Precision Eng., 2015, 23(4): 1096-1104. (in Chinese)