激光增材制造中已成形截面对粉末浓度的影响
[1] SONG L J, BAGAVATH-SINGH V, DUTTA B, et al.Control of melt pool temperature and deposition height during direct metal deposition process[J].The International Journal of Advanced Manufacturing Technology, 2012, 58(1-4): 247-256.
[2] LIU J, LI L.Direct fabrication of thin-wall parts by laser cladding[J].Journal of Manufacturing Processes, 2006, 8(1): 1-7.
[3] LIU J, LI L.Study on cross-section clad profile in coaxial single-pass cladding with a low-power laser[J].Optics & Laser Technology, 2005, 37(6): 478-482.
[4] XIONG J, ZHANG G, GAO H, et al.Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing[J].Robotics and Computer Integrated Manufacturing, 2013, 29(2): 417-423.
[5] CAO Y, ZHU S, LIANG X, et al.Overlapping model of beads and curve fitting of bead section for rapid manufacturing by robotic MAG welding process[J].Robotics and Computer-Integrated Manufacturing, 2011, 27(3): 641-645.
[6] ZHOU C, ZHAO S, WANG Y, et al.Mitigation of pores generation at overlapping zone during laser cladding[J].Journal of Materials Processing Technology, 2015, 216(1): 369-374.
[7] LIN J, HWANG B C.Coaxial laser cladding on an inclined substrate[J].Optics & Laser Technology, 1999, 31(8): 571-578.
[8] ZHU G, LI D, ZHANG A, et al.The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition[J].Optics & Laser Technology, 2012, 44(2): 349-356.
[9] LIU J, LI L.Effects of powder concentration distribution on fabrication of thin-wall parts in coaxial laser cladding[J].Optics & Laser Technology, 2005, 37(4): 287-292.
姚银, 宋立军. 激光增材制造中已成形截面对粉末浓度的影响[J]. 应用激光, 2018, 38(4): 511. Yao Yin, Song Lijun. Effects of Formed Cross Sections on Powder Concentration in Laser Additive Manufacturing[J]. APPLIED LASER, 2018, 38(4): 511.