[1] 张维平, 刘中华. 激光熔覆原位合成TiC-Cr7C3-Ti-Ni金属复合材料涂层[J]. 中国激光, 2008, 35(7): 1091～1094

    Zhang Weiping, Liu Zhonghua. Study on microstructure of in-situ synthesis of TiC-Cr7C3-Ti-Ni metal-ceramics composite coating[J]. Chinese J. Lasers, 2008, 35(7): 1091～1094

[2] . Kaul, P. Ganesh, S. K. Albert et al.. Laser cladding of austenitic stainless steel with nickel base hardfacing alloy[J]. Surf. Eng., 2003, 19(4): 268-270.

[3] . 40Cr激光熔凝硬化组织形态及硬度研究[J]. 热处理技术与装备, 2008, 29(3): 25-28.

    . Study on microstructure and hardness of laser melting of 40Cr steel[J]. Heat Treatment Technolegy and Equipment, 2008, 29(3): 25-28.

[4] 王新洪, 张敏, 邹增大 等. 激光熔覆TiCp/NiCrBSi复合涂层的组织与摩擦学性能[J]. 中国激光, 2003, 30(6): 562～566

    Wang Xinhong, Zhang Min, Zou Zengda et al.. Investigation on the microstructure and properties of laser clad TiCp/NiCrBSi alloys composite coating[J]. Chinese J. Lasers, 2003, 30(6): 562～566

[5] 晁明举, 梁二军, 赵栋. TiO2对45#钢表面激光熔覆镍基合金的影响[J]. 中国激光, 2003, 30(10): 947～952

    Chao Mingju, Liang Erjun, Zhao Dong. Effect of TiO2 on the laser cladding layers of Ni-based alloy on 45# steel [J]. Chinese J. Lasers, 2003, 30(10): 947～952

[6] 黄开金, 林鑫, 陈池 等. AZ91D镁合金表面激光熔覆Zr-Cu-Ni-Al/TiC复合粉末的组织与磨损[J]. 中国激光, 2007, 34(4): 549～554

    Huang Kaijin, Lin Xin, Chen Chi et al.. Microstructure and wear behaviour of laser-clad Zr-Cu-Ni-Al/TiC composites on AZ91D magnesium alloy[J]. Chinese J. Lasers, 2007, 34(4): 549～554

[7] . H. Lee, Y. S. Yang. Sensitivity analysis of processing parameters by direct differentiation method for laser surface hardening[J]. Materials and Manufacturing Processes, 2001, 16(3): 353-374.

[8] 罗根香, 吴国清, 黄正 等. K418合金激光熔覆Ni-Cr-Ti-Al涂层的组织研究[J]. 中国激光, 2007, 34(2): 283～287

    Luo Genxiang, Wu Guoqing, Huang Zheng et al.. Microstructures of Ni-Cr-Ti-Al laser claddings on K418 superalloy[J]. Chinese J. Lasers, 2007, 34(2): 283～287

[9] S. Lampman. Introduction to Surface Hardening of Steels[M]. ASM Handbook, Vol. 4, Heat Treating, ASM International, Materials Park, OH. 1997. 259～267

[10] . C. Reed, Z. Shen, J. M. Robinson et al.. Laser transformation hardeningof steel: beammode, beam size, and composition[J]. Mater. Sci. Technol., 1999, 15: 109-118.

[11] . 激光淬火和冲击复合强化处理 40Cr 钢的耐磨性能研究[J]. 摩擦学学报, 2003, 23(5): 448-450.

    . Study on wear-resistance of laser quenched and shocked 40Cr steel[J]. Tribology, 2003, 23(5): 448-450.

[12] 魏仑, 陈庆华, 李俊昌 等. 40铬钢表面加碳激光合金化处理[J]. 激光技术, 2002, 26(1): 1～4

    Wei Lun, Chen Qighua, Li Junchang et al.. Laser surface alloying of 40Cr steel with carbon[J]. Laser Technology, 2002, 26(1): 1～4

[13] Gongying Liang, T. T. Wong, Geng An et al.. Atmosphere corrosion behavior of plasma sprayed and laser remelted coatings on copper[J]. Chin. Opt. Lett., 2006, 4(1): 59～62

[14] 李强, 雷廷权, 孟庆昌 等. 激光熔覆Ni-Cr-B-Si-C合金涂层显微组织的透射电镜研究[J]. 中国激光, 1999, A26(4): 372～378

    Li Qiang, Lei Tingquan, Meng Qingchang et al.. Transmission electron microscopy for microstructural characterization of the laser clad Ni-Cr-B-Si-C alloy [J]. Chinese J. Lasers, 1999, A26(4): 372～378

[15] . Strengthening mechanism of particle reinforced metal matrix composite coating by laser cladding[J]. Trans. Mater. Heat Treat., 2005, 26(1): 70-73.

[16] 李宝灵, 温宗胤, 刘旭红 等．激光熔覆技术应用于轴类零件表面修复的实验研究[J]. 应用激光, 2007, 27(4): 290～293

    Li Baoling, Wen Zongyin, Liu Xuhong et al.. An experimental study of laser cladding technology applied for axle surface repair [J]. Applied Laser, 2007, 27(4): 290～293