[1] dr EICHHORN K.LEDs in automotive lighting[J].SPIE,2006,6134:1-6.

[2] 王声学,吴广宁,蒋伟,等.LED原理及其照明应用[J].灯与照明,2006,30(4):32-35.WANG SH X,WU G N,JIANG W,et al..The principle and illumination applies of light emitting diode[J].Light and Lighting,2006,30(4):32-35.(in Chinese)

[3] 许文海,赵欢,芦永军.LED阵列式紫外固化光源光学系统设计[J].光学精密工程,2007,15(7):1032-1037.ZHAO W H,ZHAO H,LU Y J.Design of an optical system for UV curing source with LED array[J].Opt.Precision Eng.,2007,15(7):1032-1037.(in Chinese)

[4] 陈波,余彬海.大功率LED封装结构的仿真设计[J].佛山科学技术学院学报(自然科学版),2006,24(1):28-31.CHEN B,Yu B H.Simulation design of package structure of high-power LED[J].Journal of Foshan University(Natural Science Edition),2006,24(1):28-31.(in Chinese)

[5] 颜峻,王素彬,于映.用蒙特卡罗方法模拟LED光源分布[J].福州大学学报(自然科学版),2003,8(4):414-416.YAN J,WANG S B,Yu Y.The LED light's optical package design based on Monte Carlo simulation method[J].Journal of Fuzhou University(Natural Science),2003,8(4):414-416.(in Chinese)

[6] 王淑荣,邢进,李福田.利用积分球光源定标空间紫外遥感光谱辐射计[J].光学精密工程,2006,14(2):185-190.WANG SH R,XING J,LI F T.Spectral radiance responsivity calibration of ultraviolet remote sensing spectroradiometer in space using integrating sphere[J].Opt.Precision Eng.,2006,14(2):185-190.(in Chinese)

[7] LEE S J.Light-emitting diode lamp design by monte carlo photon simulation[J].SPIE,2001,4278:99-108.

[8] 颜峻.小信号级LED光源封装光学结构的模拟、设计与实验分析[D].福州:福州大学,2003.YAN J.Simulation design and experiment analysis of optical package structure of LED[D].Fuzhou:Fuzhou Normal University,2003.(in Chinese)

[9] 王喜昌,范文强,昊现成.光在多层不匹配介质中的稳态传输[J].光学精密工程,2007,15(5):656-661.WANG X CH,FAN W Q,wu X CH.Steady-state photon transport in multi-layered mismatched mediun[J].Opt.Precision Eng.,2007,15(5):656-661.(in Chinese)