AZ91D镁合金表面激光熔覆Zr-Cu-Ni-Al/TiC复合粉末的组织与磨损
[1] Zhang Jin, Zhang Zonghe, Zou Gang et al.. Magnesium Alloys and Applications [M]. Beijing: Chemical Industry Press, 2004. 225~245
张津,章宗和,邹钢 等. 镁合金及应用[M]. 北京:化学工业出版社,2004. 225~245
[2] Ghazanfar Abbas, Lin Li, Uzma Ghazanfar et al.. Effect of high power diode laser surface melting on wear resistance of magnesium alloys [J]. Wear, 2006, 260(1-2):175~180
[3] J. Dutta Majumdar, R. Galun, B. L. Mordike et al.. Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy [J]. Materials Science and Engineering A, 2003, 361(1-2):119~129
[4] J. Dutta Majumdar, B. Ramesh Chandra, B. L. Mordike et al.. Laser surface engineering of a magnesium alloy with Al+Al2O3 [J]. Surface and Coatings Technology, 2004, 179(2-3):297~305
[5] R. Galun, A. Weisheit, B. L. Mordike. Improving the surface properties of magnesium by laser alloying [J]. Corrosion Reviews, 1998, 16(1-2):53~74
[7] Y. Yang, J. D. Hu, H. Y. Wang et al.. Laser (Nd:YAG) cladding of AZ91D magnesium alloys with Al+Ti+C nanopowders [J]. Lasers in Engineering, 2006, 16(1-2):9~17
[8] . Bakkar, R. Galun, V. Neubert. Microstructural characterisation and corrosion behaviour of laser cladded Al-12Si alloy onto magnesium AS41/carbon fibre composite[J]. Materials Science and Technology, 2006, 22(3): 353-362.
[9] . Effect of laser surface modification on the microstructure and the wear properties of Ni-Cr-Mo-B alloy[J]. Journal of the Iron and Steel Institue of Japan, 1991, 77(3): 422-429.
[10] . . Microstructure and properties of laser clad Zr-based alloy coatings on Ti substrates[J]. Surface and Coatings Technology, 2004, 176(3): 284-289.
[11] . . Inquiry of friction and wear behavior and mechanisum of AZ91D magnesium alloy[J]. Journal of Lanzhou University of Technology, 2006, 32(1): 33-36.
[12] Li Gang. Laser cladding and laser-induced self-propagating reaction synthesis of Zr-based amorphous alloy [D]. Dalian University of Technology, 2003. 35~37
李刚. Zr基非晶合金激光熔覆与诱导自蔓延合成[D]. 大连理工大学, 2003. 35~37
[13] . . Crystallization, mechanical and corrosion properties of Zr-Cu-Ni-Al-Nb bulk glassy alloys[J]. Acta Physica Sinica, 2006, 55(4): 1930-1935.
[14] J. H. Ouyang, Y. T. Pei, T. C. Lei et al.. Tribological behaviour of laser-clad TiCp composite coating [J]. Wear, 1995, 158(1-2):167~172
[15] . Synthesis and mechanical properties of bulk amorphous Zr-Al-Ni-Cu alloys containing ZrC particles[J]. Materials Transactions JIM, 1997, 38(9): 793-800.
[16] . Research and development of CW laser glazing on alloy surface[J]. Materials for Mechanical Engineering, 1996, 20(5): 19-23.
[17] I. Manna, Majumdar J. Dutta, Chandra B. Ramesh et al.. Laser surface cladding of Fe-B-C, Fe-B-Si and Fe-BC-Si-Al-C on plain carbon steel [J]. Surface and Coatings Technology, 2006, 201(1-2):434~440
[18] . . Microstructure and tribological properties of laser clad Zr-Al-Ni-Cu composite coating[J]. Tribology, 2002, 22(5): 343-346.
[19] . . Microstructure and properties of laser cladding Zr-based coatings[J]. Materials for Mechanical Engineering, 2003, 27(5): 44-47.
[20] Liu Jiajun. Principle of Materials Wear and Its Wear Resistance [M]. Beijing: Tsinghua University Press,1993. 98~102
刘家浚. 材料磨损原理及其耐磨性[M]. 北京: 清华大学出版社, 1993. 98~102
黄开金, 林鑫, 陈池, 谢长生. AZ91D镁合金表面激光熔覆Zr-Cu-Ni-Al/TiC复合粉末的组织与磨损[J]. 中国激光, 2007, 34(4): 549. 黄开金, 林鑫, 陈池, 谢长生. Microstructure and Wear Behaviour of Laser-Clad Zr-Cu-Ni-Al/TiC Composites on AZ91D Magnesium Alloy[J]. Chinese Journal of Lasers, 2007, 34(4): 549.