激光立体成形TC4钛合金组织和力学性能研究
[1] G Welsch, R Boyer, E W Collings. Material properties handbook: titanium alloys[M]. ASM International, 1994.
[2] E Msaawad, Y Sano, L Wagner, et al.. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys[J]. Materials Science and Engineering A, 2012, 536: 82-91.
[3] 薛蕾, 陈静, 林鑫, 等. 激光快速修复Ti-6Al-4V合金的显微组织与力学性能[J]. 稀有金属材料与工程, 2007, 36(6): 989-993.
Xue Lei, Chen Jing, Lin Xin, et al.. Microstructures and mechanical properties of laser rapid repaired Ti-6Al-4V alloy[J]. Rare Metal Materials and Engineering, 2007, 36(6): 989-993.
[4] 林鑫, 薛蕾, 陈静, 等. 激光成形修复Ti-6Al-4V钛合金零件的组织与性能[J]. 中国表面工程, 2009, 22(1): 19-24.
Lin Xin, Xue Lei, Chen Jing, et al.. Microstructure and mechanical properties of laser forming repaired Ti-6Al-4V alloy component[J]. China Surface Engineering, 2009, 22(1): 1-24.
[5] 王小艳, 陈静, 林鑫, 等. AlSi12粉激光成形修复7050铝合金组织[J]. 中国激光, 2009, 36(6): 1585-1590.
[6] 张凤英, 陈静, 谭华, 等. 混合元素法激光立体成形过程粉末输送性研究[J]. 中国激光, 2009, 36(5): 1267-1272.
[7] 陈静, 张强, 刘彦红, 等. 激光成形修复Ti17合金组织与高温性能研究[J]. 中国激光, 2011, 38(6): 0603022.
[8] 林鑫, 杨海欧, 陈静, 等. 激光快速成形过程中316L不锈钢显微组织的演变[J]. 金属学报, 2006, 42(4): 361-368.
Lin Xin, Yang Haiou, Chen Jing, et al.. Microstructure evolution of 316L stainless steel during laser rapid forming[J]. Acta Metallurgica Sinica, 2006, 42(4): 361-368.
[9] 黄卫东, 林鑫. 激光立体成形高性能金属零件研究进展[J]. 中国材料进展, 2010, 29(6): 12-27.
Huang Weidong, Lin Xin. Research progress in laser solid forming of high performance metallic component[J]. Materials China, 2010, 29(6): 12-27.
[10] 张霜银, 林鑫, 陈静, 等. 热处理对激光立体成形TC4合金的组织和性能研究[J]. 稀有金属材料与工程, 2007, 36(7): 1263-1266.
Zhang Shuangyin, Lin Xin, Chen Jing, et al.. Influence of heat treatment on the microstructure and properties of Ti-6Al-4V titanium alloy by laser rapid forming[J]. Rare Metal Materials and Engineering, 2007, 36(7): 1263-1266.
[11] S M Kelly, S L Kampe. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: part I. microstructural characterization[J]. Metallurgical and Materials Transactions A, 2004, 35(6): 1861-1867.
[12] F X Gil Mur, D.Rodríguez, J A Planell. Influence of tempering temperature and time on the α′-Ti-6A1-4V martensite[J]. Journal of Alloys and Compounds, 1996, 234(2): 287-289.
[13] Bey Vrancken, Lore Thijs, Jean-Pierre Kruth, et al.. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 2012, 541: 177-185.
[14] G Lütjering. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys[J]. Materials Science and Engineering: A, 1998, 243(1-2): 32-45.
[15] Zhou Y G, Zeng W D, Yu H Q. An investigation of a new near-beta forging process for titanium alloys and its application in aviation components[J]. Materials Science and Engineering: A, 2005, 393(1-2): 204-212.
[16] Kang Q, Guo Z X, Li D, et al.. Evidence of the existence an α/β interface phase in a near-αtitanium alloy[J]. Materials Science and Engineering A, 2000, 280: 182-186.
[17] 周义刚, 曾卫东, 俞汉青. 近β锻造推翻陈旧理论发展了三态组织[J]. 中国工程科学, 2001, 3(5): 61-66.
Zhou Yigang, Zeng Weidong, Yu Hanqing. The near β forging overthrows the conventional forging theory and develops a new Tri-modal microstructure[J]. Engineering Science, 2001, 3(5): 61-66.
李静, 林鑫, 钱远宏, 黄卫东. 激光立体成形TC4钛合金组织和力学性能研究[J]. 中国激光, 2014, 41(11): 1103010. Li Jing, Lin Xin, Qian Yuanhong, Huang Weidong. Study on Microstructure and Property of Laser Solid Forming TC4 Titanium Alloy[J]. Chinese Journal of Lasers, 2014, 41(11): 1103010.