一种飞轮扰振对成像像移影响的数值分析方法

为了实现像移大小的可靠预估, 建立了一种对从扰振源到成像像移的传递函数进行估算的数值分析方法.首先利用Kistler微扰振测力平台对飞轮扰振进行测量, 获得了各向扰振的高精度实测数据.将飞轮安装在高仿真度的整星样机中进行试验, 获得了受飞轮微振动影响的图像像移数据.利用飞轮扰振数据和像移数据中的谐波数据建立并求解了一系列以传递函数为待求变量的线性方程组.最后利用所得传递函数对相同批次不同飞轮产品扰振所致像移进行预估.对比预估值和该飞轮实测像移值发现：预估结果和实测结果中谐波特性一致.相对于实测值, 预估值在典型响应处误差不高于10%, 大部分预估值的绝对误差不超过0.1个像素, 所得传递函数可较好的对成像像移进行预估.相较于传统理论建模方法, 该方法具有更高的可信度和更快的分析速度.

Abstract

In order to evaluate the image motion reliably, a numerical analysis method was promoted for calculations of jitter transfer functions between input disturbances and output image motion. Firstly, Kistler table is applied to measure the disturbances of flywheel and precise test data of each disturbances are achieved. Secondly, a flywheel is assembled in a high-fidelity satellite prototype and jitter-affected image motion data are obtained from the prototype. Thirdly, a series of Linear System of Equations (LSE) whose variables are the transfer functions are constructed and solved with the help of harmonic data of flywheel disturbances and image motion. At last, by applying the calculated transfer functions, the evaluation of image motion of another flywheel which comes from the same product series is completed. With the reference to the test data, the evaluated image motion performs the same harmonical characteristics, the relative errors of typical responses in evaluated image motion are less than 10% and most absolute errors of rest parts are no more than 0.1 pixel. Compared with theoretic modeling method, the numerical method is faster and more reliable.

参考文献

[1] 李林, 王栋, 徐婧, 等. 飞轮组件微振动对高分辨率光学卫星光轴的影响［J］. 光学精密工程, 2016, 24(10): 2515-2522.

LI Lin, WANG Dong, XU Jing. Influence of micro-vibration of flywheel components on optical axis of high resolution optical satellite［J］.Optical and Precision Engineering, 2016, 24(10): 2515-2522.

[2] MILLER D W, de WECK O L. Integrated dynamics and controls modeling for the Space Interferometry Mission (SIM)［C］. Aerospace Conference, IEEE Proceedings, 2002, 4(4): 2089-2102.

[3] 庞世伟, 杨雷, 曲广吉. 高精度航天器微振动建模与评估技术最近进展［J］. 强度与环境, 2007, 34(6): 1-9.

PANG Shi-wei, YANG Lei, QU Guang-ji. New development of micro-vibration integrated modeling and assessment technology for high performance spacecraft［J］. Structure and Environment Engineering, 2007, 34(6): 1-9.

[4] LIU K C, MAGHAMI P, BLAUROCK C. Reaction wheel disturbance modeling, jitter analysis, and validation tests for solar dynamics observatory［C］. AIAA, 2013.

[5] 王红娟, 王炜, 王欣, 等. 航天器微振动对空间相机像质的影响［J］. 光子学报, 2013, 42(10): 1212-1217.

WANG Hong-juan, WANG Wei, WANG Xin. Space camera image degradation induced by satellite micro-vibration［J］. Acta Photonica Sinica, 2013, 42(10): 1212-1217.

[6] HYDE T T, KONG Q H, HOWARD J M, et al. Integrated modeling activities for the james webb space telescope: optical jitter analysis［C］. SPIE, 2004, 5487: 588-599.

[7] 张博文, 微振动对刚体空间相机图像质量的影响分析［J］. 测绘通报, 2014, S0: 65-69.

ZHANG Bo-wen. Analysis on effect of micro-vibration on rigid-body space camera imaging［J］. Bulletin of Surveying & Mapping, 2014, S0: 65-69.

[8] OPPENHEIM A V, WILLSKY A S, NAWAB S H. Signal and systems［M］. New Jersey: Prentice Hall, 2009.

[9] MASTERSON R A, MILLER D W, GROGAN R L. Development and validation of reaction wheel disturbance models: empirical model［J］. Journal of Sound & Vibration, 2002, 249(3): 575-598.

[10] 关新. 高分辨率遥感卫星隔振与姿态控制一体化设计［D］. 北京, 清华大学, 2012.

[11] 龚小雪, 张雷, 宣明. 光学遥感卫星飞轮微振动仿真和地面实验研究［J］. 光子学报, 2019, 48(3): 0312004.

GONG Xiao-xue, ZHANG Lei, XUAN Ming. Modeling and ground-based experimental jitter researches on earth observation satellite［J］. Acta Photonica Sinica, 2019, 48(3): 0312004.

龚小雪, 张雷, 宣明. 一种飞轮扰振对成像像移影响的数值分析方法[J]. 光子学报, 2019, 48(5): 0528002. GONG Xiao-xue, ZHANG Lei, XUAN Ming. Numerical Modeling Method for Evaluation of Image Motion Caused by Flywheel Disturbances[J]. ACTA PHOTONICA SINICA, 2019, 48(5): 0528002.

一种飞轮扰振对成像像移影响的数值分析方法

关于本站 Cookie 的使用提示

全站搜索

一种飞轮扰振对成像像移影响的数值分析方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索