[1] 周良墉. 环面蜗杆修形原理及制造技术［M］. 北京: 国防科技大学出版社，2005.

    ZHOU L Y. Hourglass Worm Modification Principle and Manufacturing Technology ［M］. Beijing: National University of Defense Technology Press, 2005. (in Chinese)

[2] MOHAN L V, SHUNMUGAM M S. Geometrical aspects of double enveloping worm gear drive ［J］. Mechanism and Machine Theory, 2009: 2053-2065.

[3] 石照耀. 现代滚刀测量仪器概况［J］. 磨床与磨削, 1992, (1): 14-17.

    SHI ZH Y. Status of modern hob measuring machine ［J］. Grinder and Grinding, 1992, (1): 14-17. (in Chinese)

[4] 秦大同, 颜佳, 张光辉. 平面包络环面蜗杆加工误差诊断及提高制造精度的研究［J］. 机械传动, 1996, 2: 34-37.

    QIN D T, YAN J, ZHANG G H. Diagnosis of machining errors and improvement of manufacture precision on plane-generated hourglass worm ［J］. Mechanical Transmission, 1996, 2: 34-37. (in Chinese)

[5] 姬永军, 劳奇成. 基于齿轮测量中心的环面蜗杆测量研究［J］. 工具技术, 2008, 12: 102-105.

    JI Y J, LAO Q CH. Study on measurement of hourglass worm with gear measuring center ［J］. Tool Engineering, 2008, 12: 102-105. (in Chinese)

[6] 王立鼎, 娄志峰, 王晓东,等. 超精密渐开线齿形的测量方法［J］. 光学 精密工程, 2006, 14(6): 980-985.

    WANG L D, LOU ZH F, WANG X D, et al.. Measuring methods of ultraprecision involute tooth profile ［J］. Opt. Precision Eng., 2006, 14(6): 980-985. (in Chinese)

[7] 石照耀, 叶勇, 丁毅,等. CNC式高准确度滚刀测量机［J］. 仪器仪表学报, 1999, 20(5): 529-531.

    SHI ZH Y, YE Y, DING Y, et al.. CNC high precision measuring machine for hobs ［J］. Chinese Journal of Scientific Instrument, 1999, 20(5): 529-531. (in Chinese)

[8] 石照耀,张斌,林家春. 基于免形状测量模式的复杂形状测量机设计［J］. 仪器仪表学报, 2012, 6: 1377-1384.

    SHI ZH Y, ZHANG B, LIN J CH. Design of measuring machine for complex geometry based on form-free measurement mode ［J］. Chinese Journal of Scientific Instrument, 2012, 06: 1377-1384. (in Chinese)

[9] 荣根,汤洁. 齿轮测量软件架构设计分析［J］. 机械传动,2013,7: 85-87.

    RONG G, TANG J. Design and analysis of gear measure software architecture［J］. Journal of Mechanical Transmission, 2013,7: 86-87. (in Chinese)

[10] 石照耀. 复杂螺旋曲面特征线测量的理论与技术研究［D］.合肥: 合肥工业大学,2001.

    SHI ZH Y. Research on the theory & technology of measurement for characterized curves of complex helicoidal surfaces ［D］. Hefei: Hefei University of Technology, 2001. (in Chinese)

[11] JB/T10024-2008, 卧式滚刀测量仪［S］.

    JB/T10024-2008, Horizontal hob measuring machine ［S］. (in Chinese)

[12] GB/T6084-2001, 齿轮滚刀通用技术条件［S］.

    GB/T6084-2001, General technical specifications for gear hobs ［S］. (in Chinese)

[13] ILLES D, SANDOR B. The analysis of cutting edges of face gear hob with analytical calculation and three coordinate measuring machine ［C］. The 11th International Symposium of Measurement Technology and Intelligent Instruments, Aachen and Braunschweig, 2013: 30-36.