小尺度波纹对KDP光学元件透射比的影响

高精度KDP晶体是惯性约束核聚变光路系统中的重要元件,而已加工表面的小尺度波纹对光学元件的透射比有着重要影响。采用傅里叶模方法理论分析了表面小尺度波纹的幅值及周期对KDP光学元件透射比的影响。研究结果表明,当小尺度波纹幅值小于100 nm时,透射比随波纹幅值的增加基本呈线性增长,波纹幅值每提高10 nm,透射比可提高近0.5%;透射比随着小尺度波纹周期的增加围绕中心透射比上下浮动,透射比振幅基本保持不变,且中心透射比及透射比振幅均随着小尺度波纹幅值的增加而增大;小尺度波纹周期在10.5-12 μm区间内时透射比明显很低,需采取措施避免小尺度波纹的周期出现在此区间。对KDP晶体进行了加工、表面形貌检测及透射比检测的实验,实验结果与理论计算结果基本吻合。

Abstract

High-precision KDP optical element is a key component in ICF optical system. The micro-waveness on the machined KDP surface has a significant impact on its transmittance. The effect of micro-waveness amplitude and period on the transmittance of KDP optical element is discussed by Fourier modal theory. Results indicate that:the transmittance increases linearly as the micro-waveness amplitude grows (about 0.5% per 10 nm) when the micro-waveness amplitude is less than 100 nm;the transmittance varies around the central value while the transmittance amplitude remains unchanged,and both of them increase as the micro-waveness amplitude grows. The transmittance is very low when micro-waveness period is between 10.5 μm and 12 μm,and measures should be taken to avoid micro-waveness period in such range. Processing,detection experiments of morphological surface and transmittance of KDP crystal are carried out,and the experimental results are consistent with the theoretical calculations basically.

参考文献

[1] . KDP晶体超精密切削各向异性的理论研究[J]. 工具技术, 2005, 39(11): 19-21.

. Theoretical research on anisotropy of ultra-precision machining KDP crystal[J]. Tool Engineering, 2005, 39(11): 19-21.

[2] 刘强,邬融,张晓波等. 多台阶衍射光学元件的工艺优化[J]. 中国激光,2008,35(8):1165-1169

Liu Qiang,Wu Rong,Zhang Xiaobo et al.. Technical optimization of multi-level diffractive optical elements[J]. Chinese J. Lasers,2008,35(8):1165-1169

[3] 王景贺,陈明君,董申等. KDP晶体单点金刚石切削脆塑转变机理的研究[J]. 光电工程,2005,32(7):67-70

Wang Jinghe,Chen Mingjun,Dongshen et al.. Study on the mechanism of brittle-ductile transition for turning KDP crystal with single point diamond[J]. Opto-Electronic Engineering,2005,32(7):67-70

[4] Gao Fuhua,Wang Chengcheng,Tang Xionggui et al.. Near field analysis for periodic diffractive gratings using Fourier modal method[J]. Microelectronic Engineering,2006,83(4-9):1062-1066

[5] . Multilayer modal method for diffraction gratings of arbitrary profile,depth and permittivity[J]. J. Opt. Soc. Am. A, 1993, 10(12): 2581-2591.

[6] 唐雄贵,郭永康,杜惊雷等. 利用傅里叶模方法分析厚层光刻胶内衍射光场[J]. 光学学报,2005,25(2):246-250

Tang Xionggui,Guo Yongkang,Du Jinglei et al.. Analysis of diffractive image field in thick film photo-resist by using Fourier modal method[J]. Acta Optica Sinica,2005,25(2):246-250

[7] . . A modal theory and recursion RTCM algorithm for gratings of deep grooves and arbitrary profile[J]. Science in China Ser. A, 1999, 42(6): 636-645.

[8] 孔伟金,云茂金,崔春玲. 梯形介质膜光栅衍射特性分析[J]. 光学学报,2008,28(7):1415-1419

Kong Weijin,Yun Maojin,Cui Chunling et al.. Diffraction property of multi-layer dielectric grating with trapezium groove[J]. Acta Optica Sinica,2008,28(7):1415-1419

[9] 唐雄贵,傅克祥,王植恒等. 任意各向异性介质光栅的严格模式理论分析[J]. 光学学报,2002,22(7):774-779

Tang Xionggui,Fu Kexiang,Wang Zhiheng et al.. Analysis of rigorous modal theory for arbitrary dielectric gratings made with anisotropic materials[J]. Acta Optica Sinica,2002,22(7):774-779

[10] 傅克祥,王植恒,张靖等. 对正交浮雕光栅傅里叶模方法的快速实现[J]. 光学学报,2001,21(2):236-241

Fu Kexiang,Wang Zhiheng,Zhang Jing et al.. Fast processing of Fourier modal method for perpendicularly crossed surface-relief binary-period gratings[J]. Acta Optica Sinica,2001,21(2):236-241

[11] . Asymptotic solutions of characteristic equations[J]. Nonlinear Analysis:Real World Applications, 2005, 6(3): 429-446.

[12] 傅克祥,张大跃,王植恒等. 相位光栅的严格模式理论及其全反射特性[J]. 物理学报,1998,47(8):1278-1287

Fu Kexiang,Zhang Dayue,Wang Zhiheng et al.. Rigorous modal theory of phase grating and the total reflection property[J]. Acta Physica Sinica,1998,47(8):1278-1287

[13] . . Research on influence of the cutter rake angle to the surface quality during SPDT machining of crystal KDP[J]. Key Engineering Materials, 2007, 339: 1-5.

[14] . . Critical cutting condition for brittle-ductile transition of KDP crystals in ultra-precision machining[J]. Key Engineering Materials, 2007, 329: 409-414.

[15] . . Forecasting of surface roughness and cutting force in single point diamond turning for KDP crystal[J]. Key Engineering Materials, 2007, 339: 78-83.

[16] 赵军普,胡东霞,周维等. 高功率固体激光近场强度功率谱密度特性分析[J]. 光学学报,2008,28(s1):118-122

Zhao Junpu,Hu Dongxia,Zhou Wei et al.. Analysis of near-field power spectral density in high-power solid-state laser[J]. Acta Optica Sinica,2008,28(s1):118-122

陈明君, 姜伟, 胡建平, 李明全. 小尺度波纹对KDP光学元件透射比的影响[J]. 光学学报, 2010, 30(4): 1162. Chen Mingjun, Jiang Wei, Hu Jianping, Li Mingquan. Effect of Micro-Waveness on Transmittance of KDP Optical Element[J]. Acta Optica Sinica, 2010, 30(4): 1162.

小尺度波纹对KDP光学元件透射比的影响

关于本站 Cookie 的使用提示

全站搜索

小尺度波纹对KDP光学元件透射比的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索