[1] 徐滨士. 再制造工程技术及其研究新进展［J］. 数字制造科学, 2008, 6(2): 1～18

    Xu Binshi. Technical foundation and new research development of remanufacturing engineering［J］. Digital Manufacture Science, 2008, 6(2): 1～18

[2] M. Riabkina-Fishman, J. Zahavi. Laser alloying and cladding for improving surface properties［J］. Appl. Surf. Sci., 1996, 106: 263～267

[3] Meng Qingwu, Geng Lin, Ni Dingrui. Laser cladding NiCoCrAlY coating on Ti-6Al-4V［J］. Mater. Lett., 2005, 59(22): 2774～2777

[4] 李耀忠, 王存山, 李婷 等. 纳米SiC颗粒对激光熔覆NiFeBSi合金涂层组织和性能的影响［J］. 中国激光, 2010, 37(5): 1356～1360

    Li Yaozhong, Wang Cunshan, Li Ting et al.. Influence of nano-SiC particle on microstructure and properties of laser clad NiFeBSi alloy coating［J］. Chinese J. Lasers, 2010, 37(5): 1356～1360

[5] 董世运, 徐滨士, 王志坚 等. 激光再制造齿类零件的关键问题研究［J］. 中国激光, 2009, 36(1): 134～138

    Dong Shiyun, Xu Binshi, Wang Zhijian et al.. Vital problems on laser remanufacturing gears［J］. Chinese J. Lasers, 2009, 36(1): 134～138

[6] 翟玉峰, 王新洪, 黄坚. 激光熔覆TiC-Mo2C颗粒增强Fe基涂层的组织与性能［J］. 中国激光, 2009, 36(12): 3287～3292

    Zhai Yufeng, Wang Xinhong, Huang Jian. Microstructure and properties of TiC-Mo2C particles reinforced Fe-based composite coatings produced by laser cladding［J］. Chinese J. Lasers, 2009, 36(12): 3287～3292

[7] C. Navas, A. Conde, B. J. Fernandez et al.. Laser coatings to improve wear resistance of mould steel［J］. Surf. Coat. Technol., 2005, 194(1): 136～142

[8] S. Y. Dong, B. S. Xu, Z. J. Wang et al.. Laser remanufacturing technology and its applications［C］. SPIE, 2007, 6825: 68251N

[9] M. L. Zhong, W. J. Liu, G. Q. Ning et al.. Laser direct manufacturing of tungsten nickel collimation component［J］. Mater. Process. Technol., 2001, 147(2): 167～173

[10] L. Shepeleva, B. Medres, W. D. Kaplan et al.. Laser cladding of turbine blades［J］. Surf. Coat. Technol., 2000, 125(1-3): 45～48