[1] Dixit S N,Lawson J K,Manes K R,et al. Kinoform phase plates for local plane irradiance profile control[J]. Opt Lett,1994,19(6):417-419.

[2] Bett T H,Stevenson R M,Taghizadeh M R,et al. Diffractive optics development for application on high-power solid state lasers[C]//Proc of SPIE. 1995,2633:129-140.

[3] 张巍,舒方杰,张晓波,等.均匀照明用衍射光学器件的空间频域优化设计方法[J].中国激光,2007,34(10):1388-1492.(Zhang Wei,Shu Fangjie,Zhang Xiaobo,et al. Spatial frequency spectrum optimization method for design of diffractive elements in uniform illumination. Chin J Lasers,2007,34(10):1388-1492)

[4] 刘洪亮,赵逸琼,李永平,等.一种用于均匀照明的衍射光学元件设计的快速模拟退火法[J].计算物理,2005,22(3):240-244.(Liu Hong liang,Zhao Yiqiong,Li Yongping,et al. A fast SA algorithm for the design of DOE for uniform illumination. Chinese Journal of Computational Physics,2005,22(3):240-244)

[5] 李涛,付绍军,王炜,等.一种用于均匀照明的衍射光学元件设计的混合算[J].计算物理,2002,19(1):76-80.(Li Tao,Fu Shaojun,Wang Wei,et al. A hybrid algorithm applied to the design of diffractive optical elements used in uniform illumination. Chinese Journal of Computational Physics,2002,19(1):76-80)

[6] Fienup J R. Iterative method applied to image reconstruction and to computer-generated holograms[J]. Opt Eng,1980,19(3):297-305.

[7] 刘强,邬融,张晓波,等.多台阶衍射光学元件的工艺优化[J].中国激光,2008,35(8):1165-1168.(Liu Qiang,Wu Rong,Zhang Xiaobo,et al. Technical optimization of multi-level diffractive optical elements. Chin J Lasers,2008,35(8):1165-1168)

[8] 刘强,张晓波,邬融,等.离子束刻蚀工艺误差对DOE器件的影响[J].光电工程,2007,34(11):50-54.(Liu Qiang,Zhang Xiaobo,Wu Rong,et al. Influence of fabrication error in ion beam etching on diffractive optical element. Opto-Electronic Engineering,2007,34(11):50-54)

[9] Marozas J A. Fourier transform-based continuous phase-plate design technique: a high-pass phase-plate design as an application for OMEGA and the National Ignition Facility[J]. J Opt Soc Am A,2007,24(1):74-83