[1] Li Z J, Fang F Z, Gong H and Zhang X D 2013 Review of diamond-cutting ferrous metals Int. J. Adv. Manuf. Technol. 68 1717–31

[2] Ikawa N, Donaldson R R, Komanduri R, K?nig W, Aachen T H, Mckeown P A, Moriwaki T and Stowersf I F 1991 Ultraprecision metal cutting—the past, the present and the future CIRP Ann-Manuf. Techn. 40 587–94

[3] Luo S B 2007 The development of diamond ultraprecision turning tool technology Aviat. Precis. Manuf. Technol. 43 1–4

[4] Zhang J, Zhang J, Cui T, Hao Z and Zahrani A A 2017 Sculpturing of single crystal silicon microstructures by elliptical vibration cutting J. Manuf. Process. 29 389–98

[5] Moriwaki T 1989 Machinability of copper in ultra-precision micro diamond cutting CIRP Ann-Manuf. Techn. 38 115–8

[6] Pramanik A, Neo K S, Rahman M, Li X P, Sawa M and Maeda Y 2003 Cutting performance of diamond tools during ultra-precision turning of electroless-nickel plated die materials J. Mater. Process. Technol. 140 308–13

[7] Wang J H, Dong S, Wang H X, Chen M J, Zong W J and Zhang L J 2007 Forecasting of surface roughness and cutting force in single point diamond turning for KDP crystal Key Eng. Mater. 339 78–83

[8] Wang Z Y, Dong L H, Wang D S and Dong Y H 2012 Study of HPHT single crystal diamond as precision cutting tool material Precis. Eng. 36 162–7

[9] Chon K S, Namba Y and Yoon K H 2007 Single-point diamond turning of aspheric mirror with inner reflecting surfaces Key Eng. Mater. 364–366 39–42

[10] Zhang S J, To S and Zhang G Q 2017 Diamond tool wear in ultra-precision machining Int. J. Adv. Manuf. Technol. 88 613–41

[11] Brinksmeier E and Preu? W 2012 Micro-machining Phil. Trans. R. Soc. A 370 3973–92

[12] Wang Y, Suzuki N, Shamoto E and Zhao Q 2011 Investigation of tool wear suppression in ultraprecision diamond machining of die steel Precis. Eng. 35 677–85

[13] Wilks J 1980 Performance of diamonds as cutting tools for precision machining Precis. Eng. 2 57–72

[14] Shamoto E and Suzuki N 2014 Ultrasonic vibration diamond cutting and ultrasonic elliptical vibration cutting Comprehensive Mater. Process. 11 405–54

[15] Thornton A G and Wilks J 1978 Clean surface reactions between diamond and steel Nature 274 792–3

[16] Zhao Q L, Chen M J, Liang Y C and Dong S 2002 Wear of diamond cutting tool in ultra-precision single point turning Tribology 22 321–7

[17] Merchant E 1944 Comparative cutting tests of a diamond tool and a high speed tool Ind. Diam. Rev. 1 119–24

[18] Hitchiner M P and Wilks J 1984 Factors affecting chemical wear during machining Wear 93 63–80

[19] Casstevens J M 1983 Diamond turning of steel in carbonsaturated atmospheres Precis. Eng. 5 9–15

[20] Evans C and Bryan J B 1991 Cryogenic diamond turning of stainless steel CIRP Ann-Manuf. Techn. 40 571–5

[21] Moriwaki T and Shamoto E 1991 Ultraprecision diamond turning of stainless steel by applying ultrasonic vibration CIRP Ann-Manuf. Techn. 40 559–62

[22] Brehl D E and Dow T A 2008 Review of vibration-assisted machining Precis. Eng. 32 153–72

[23] Brinksmeier E and Gl?be R 2001 Advances in precision machining of steel CIRP Ann-Manuf. Techn. 50 385–8

[24] Brinksmeier E, Gl?be R and Osmer J 2006 Ultra-precision diamond cutting of steel molds CIRP Ann-Manuf. Techn. 55 551–4

[25] Zhang X, Deng H and Liu K 2019 Oxygen-shielded ultrasonic vibration cutting to suppress the chemical wear of diamond tools CIRP Ann-Manuf. Techn. 68 69–72

[26] Deng J X, Hui Z, Wu Z and Liu A H 2011 Friction and wear behavior of polycrystalline diamond at temperatures up to 700 °C Int. J. Refract. Met. Hard Mater. 29 631–8

[27] Zou L, Dong G and Zhou M 2013 Investigation on frictional wear of single crystal diamond against ferrous metals Int. J. Refract. Met. Hard Mater. 41 174–9

[28] Zou L and Zhou M 2016 Experimental investigation and numerical simulation on interfacial carbon diffusion of diamond tool and ferrous metals J. Wuhan Univ. Technol. 31 307–14

[29] Liu X, Huang S, Qu J J and Xu W J 2014 Experiment on ionized gas jet assisted cutting of 304 stainless steel Trans. Chin. Soc. Agric. Mach. 45 334–9

[30] Blomgren O C 1972 Method and apparatus for cooling the workpiece and/or the cutting tools of a machining apparatus US Patent Specification 3670606

[31] Inada A, Min S and Ohmori H 2011 Micro cutting of ferrous materials using diamond tool under ionized coolant with carbon particles CIRP Ann-Manuf. Techn. 60 97–100

[32] Song Y, Nezu K, Park C and Moriwaki T 2009 Tool wear control in single-crystal diamond cutting of steel by using the ultra-intermittent cutting method Int. J. Tools Manuf. 49 339–43

[33] Zhang G L, Lin W L, Kan X W, Liu S, Chen Y Z, Ye F S, Zhao B H and Zhu H G 1985 Raising lifetime of diamond wire-drawing dies by ion implantation J. Beijing Norm Univ. (Nat. Sci.) 4 34–9

[34] Furushiro N, Tanaka H, Higuchi M, Yamaguchi T and Shimada S 2010 Suppression mechanism of tool wear by phosphorous addition in diamond turning of electroless nickel deposits CIRP Ann-Manuf. Techn. 59 105–8

[35] Fang F Z, Zhang H W and Qiu Z J 2010 Multi-physics action suppressing single crystal diamond in ultra-precision machining tool wear method Patent Application China No. 201010129448

[36] Dhokey N B, Utpat K, Gosavi A and Dhoka P 2013 Hot-press sintering temperature response of diamond cutting tools and its correlation with wear mechanism Int. J. Refract. Met. Hard Mater. 36 289–93

[37] Wang J C, Xin M M, Zhao T and Zhang Q B 2015 Mechanism analyses of groove wear on flank face of diamond tool from perspective of graphitization High Power Laser Part. Beams 27 53

[38] Kim S J, Le D, Lee S W, Song K H and Lee D Y 2014 Experiment-based statistical prediction on diamond tool wear in micro grooving NiP alloys Diam. Relat. Mater. 41 6–13

[39] Phinney F S 1954 Graphitization of diamond Science 120 393–4

[40] Huang S 2017 Research on diamond cutting of ferrous metals assisted by cold plasma Doctoral Dissertation Dalian University of Technology

[41] Narulkar R, Bukkapatnam S, Raff L M and Komanduri R 2008 Molecular dynamics simulations of diffusion of carbon into iron Phil. Mag. 88 1259–75

[42] Byshkin M S 2011 Bond-coordination lattice model for phase transformations in carbon Diam. Relat. Mater. 20 1310–4

[43] Oliveira L J, Cabral S C and Filgueira M 2012 Study hot pressed Fe-diamond composites graphitization Int. J. Refract. Met. Hard Mater. 35 228–34

[44] Tillmann W, Ferreira M, Steffen A, Rüster K, M?ller J, Bieder S, Paulus M and Tolan M 2013 Carbon reactivity of binder metals in diamond–metal composites— characterization by scanning electron microscopy and x-ray diffraction Diam. Relat. Mater. 38 118–23

[45] Kumar J, Negi V S, Chattopadhyay K D, Sarepaka R V and Sinha R K 2017 Thermal effects in single point diamond turning: analysis, modeling and experimental study Measurement 102 96–105

[46] Paul E, Evans C J, Mangamelli A, McGlauflin M L and Polvani R S 1996 Chemical aspects of tool wear in single point diamond turning Precis. Eng. 18 4–19

[47] Uemura M 2004 An analysis of the catalysis of Fe, Ni or Co on the wear of diamonds Tribol. Int. 37 887–92

[48] Narulkar R, Bukkapatnam S, Raff L M and Komanduri R 2009 Graphitization as a precursor to wear of diamond in machining pure iron: a molecular dynamics investigation Comput. Mater. Sci. 45 358–66

[49] Shimada S, Tanaka H, Higuchi M, Yamaguchi T, Honda S and Obata K 2004 Thermo-chemical wear mechanism of diamond tool in machining of ferrous metals CIRP Ann-Manuf. Techn. 53 57–60

[50] Guo X G, Zhai C H, Jin Z J and Guo D M The study of diamond graphitization under the action of iron-based catalyst Chin. J. Mech. Eng. 51 162–8

[51] Guo X G, Liu T, Zhai C H, Yuan Z W, Jin Z J and Guo D M Study on the mechanism of diamond graphite with the action of transition metals Chin. J. Mech. Eng. 52 23–9

[52] Zou L, Yin J, Huang Y and Zhou M 2018 Essential causes for tool wear of single crystal diamond in ultra-precision cutting of ferrous metals Diam. Relat. Mater. 86 29–40

[53] Bai Q, Wang Z, Guo Y, Chen J and Shang Y 2018 Graphitization behavior of single crystal diamond for the application in nano-metric cutting Curr. Nanosci. 14 377–83

[54] Skelton R C 1968 Turning with an oscillating tool Int. J. Mach. Tool Manuf. Des. Res. 8 239–59

[55] Zhang J, Cui T, Ge C, Sui Y and Yang H 2016 Review of micro/nano machining by utilizing elliptical vibration cutting Int. J. Mach. Tools Manuf. 106 109–26

[56] Ni H, Wang Y, Gong H, Pan L, Li Z J and Wang D 2017 A novel free-form transducer for the ultra-precision diamond cutting of die steel Int. J. Adv. Manuf. Technol. 95 2185–92

[57] Kurniawan R, Kumaran S T, Ali S, Nurcahyaningsih D A, Kiswanto G and Ko T J 2018 Experimental and analytical study of ultrasonic elliptical vibration cutting on AISI 1045 for sustainable machining of round-shaped microgroove pattern Int. J. Adv. Manuf. Technol. 98 2031–55

[58] Shamoto E and Moriwaki T 1994 Study on elliptical vibration cutting CIRP Ann. 43 35–8

[59] Jung H, Hayasaka T and Shamoto E 2018 Study on process monitoring of elliptical vibration cutting by utilizing internal data in ultrasonic elliptical vibration device Int. J. Precise. Eng. Manuf.-Green Technol. 5 571–81

[60] Moriwaki T and Shamoto E 1995 Ultrasonic elliptical vibration cutting CIRP Ann. 44 31–4

[61] Amini S, Hosseinabadi H N and Sajjady S A 2016 Experimental study on effect of micro textured surfaces generated by ultrasonic vibration assisted face turning on friction and wear performance Appl. Surf. Sci. 390 633–48

[62] Lin J Q, Han J G, Zhou X Q, Hao Z P and Lu M M 2016 Study on predictive model of cutting force and geometry parameters for oblique elliptical vibration cutting Int. J. Mech. Sci. 117 43–52

[63] Shamoto E and Altintas Y 1999 Prediction of shear angle in oblique cutting with maximum shear stress and minimum energy principles J. Manuf. Sci. Eng.-T. Asme 121 399–407

[64] Shamoto E, Suzuki N, Tsuchiya E, Hori Y, Inagaki H and Yoshino K 2005 Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces CIRP Ann-Manuf. Techn. 54 321–4

[65] Amini S, Shamoto E, Suzuki N and Nategh M J 2010 Fe analysis of one-directional and elliptical vibration cutting processes Int. J. Automat. Technol. 4 252–8

[66] Zhang X, Liu K, Kumar A S and RahmanM 2014 A study of the diamond tool wear suppression mechanism in vibration-assisted machining of steel J. Mater. Process. Technol. 214 496–506

[67] Zhang X, Senthil Kumar A, Rahman M, Nath C and Liu K 2012 An analytical force model for orthogonal elliptical vibration cutting technique J. Manuf. Process. 14 378–87

[68] Zhang J, Suzuki N, Wang Y and Shamoto E 2014 Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond J. Mater. Process. Technol. 214 2644–59

[69] Klocke F, Heselhaus M and Puellen J 2005 Ultrasonic assisted diamond turning of hardened steel alloys Proc. Int. Conf. Eur. Soc. Precis. Eng. Nanotechnol. vol 2, pp 517–20

[70] Dambon O, Klocke F, Heselhaus M, Bulla B, Weber A, Schug R and Bresseler B 2007 Vibration-assisted machining research at fraunhofer IPT—diamond turning and precision grinding Proc. ASPE Spring Top. Meet. Vib. Assisted Mach. Technol. ASPE vol 40, pp 3–10

[71] Zou L and Zhou M 2013 Finite element analysis of ultrasonic vibration assisted turning of ferrous metals Key Eng. Mater. 567 33–8

[72] Zou L, Huang Y, Zhou M and Duan L 2017 Investigation on diamond tool wear in ultrasonic vibration-assisted turning die steels Mater. Manuf. Process. 32 1505–11

[73] Bulla B, Klocke F, Dambon O and Hünten M 2012 Influence of different steel alloys on the machining results in ultrasonic assisted diamond turning Key Eng. Mater. 523–524 203–8

[74] Klocke F, Dambon O and Bulla B 2010 Direct diamond turning of aspheric steel molds with ultra precise accuracy Proc. 25th ASPE Annual Meeting, Atlanta

[75] Song Y, Park C-H and Moriwaki T 2010 Mirror finishing of Co–Cr–Mo alloy using elliptical vibration cutting Precis. Eng. 34 784–9

[76] Bulla B, Robertson D J, Dambon O and Klocke F 2013 Efficient machining of ultra precise steel moulds with freeform surfaces Proc. SPIE 8884 88840Q

[77] Bulla B, Klocke F, Dambon O and Hünten M 2012 Ultrasonic assisted diamond turning of hardened steel for mould manufacturing Key Eng. Mater. 516 437–42

[78] Gaidys R, Dambon O, Ostasevicius V, Dicke C and Narijauskaite B 2017 Ultrasonic tooling system design and development for single point diamond turning (SPDT) of ferrous metals Int. J. Adv. Manuf. Technol. 93 2841–54

[79] Priarone P C, Klocke F, Faga M G, Lung D and Settineri L 2015 Tool life and surface integrity when turning titanium aluminides with PCD tools under conventional wet cutting and cryogenic cooling Int. J. Adv. Manuf. Technol. 85 807–16

[80] Liu J J, Chen C, Yang Y F, Li L and Zhao W 2016 Experimental research of milling force and cutting temperature of TB2 titanium alloy in liquid nitrogen cooling Mater. Sci. Forum 836–837 36–42

[81] Pu Z, Outeiro J C, Batista A C, Dillon O W, Puleo D A and Jawahir I S 2012 Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components Int. J. Mach. Tools Manuf. 56 17–27

[82] Ravi S and Pradeep Kumar M 2011 Experimental investigations on cryogenic cooling by liquid nitrogen in the end milling of hardened steel Cryogenics 51 509–15

[83] Wang Q 2011 Experiment on green machining 0Cr18Ni9 stainless steel under spraying liquid nitrogen Cryogenics 33 46–50

[84] Wang Q C and Ba W H 2011 Investigation of machining 0Cr18Ni9 stainless steel under spraying liquid nitrogen Adv. Mater. Res. 314–316 1056–9

[85] Yildiz Y and Nalbant M 2008 A review of cryogenic cooling in machining processes Int. J. Mach. Tools Manuf 48 947–64

[86] Paul S, Dhar N R and Chattopadhyay A B 2001 Beneficial effects of cryogenic cooling over dry and wet machining on tool wear and surface finish in turning AISI 1060 steel J. Mater. Process. Technol. 116 44–8

[87] Jerold B D and Kumar M P 2012 Experimental comparison of carbon-dioxide and liquid nitrogen cryogenic coolants in turning of AISI 1045 steel Cryogenics 52 569–74

[88] Li G, Yi S, Sun S and Ding S 2017 Wear mechanisms and performance of abrasively ground polycrystalline diamond tools of different diamond grains in machining titanium alloy J. Manuf. Process. 29 320–31

[89] Sharma V S, Singh G and S?rby K 2014 A review on minimum quantity lubrication for machining processes Mater. Manuf. Process. 30 935–53

[90] Fra?ila D and Caizar C 2012 Investigation of the influence of process parameters and cooling method on the surface quality of AISI-1045 during turning Mater. Manuf. Process. 27 1123–8

[91] Sidik N A C, Samion S, Ghaderian J and Yazid M N A W M 2017 Recent progress on the application of nanofluids in minimum quantity lubrication machining: a review Int. J. Heat Mass Transfer 108 79–89

[92] Chandrasekaran V V, Payton L N and Hunko W S 2014 Orthogonal turning of aluminum 6061 in liquid nitrogen cutting environment Proc. ASME Int. Mech. Eng. Congress. Expos. vol 2B37033

[93] Zou L, Huang Y, Zhou M and Yang Y 2017 Effect of cryogenic minimum quantity lubrication on machinability of diamond tool in ultraprecision turning of 3Cr2NiMo steel Mater. Manuf. Process. 33 943–9

[94] Inada A, Ohmori H, Min S and Dornfeld D 2010 Investigation of the effects of an electrolytic coolant with a nano carbon additive in diamond micro cutting on ferrous materials J. Adv. Mech. Des. Syst. 4 1076–83

[95] Brinksmeier E, Glaebe R and Osmer J 2011 Surface integrity demands of high precision optical molds and realization by a new process chain Proc. Eng. 19 40–3

[96] Osmer J, Gla?be R, Riemer O, Brinksmeier E, Bu?tepage S and Hoffmann F 2009 Diamond milling of nitrided steels for optical mold making J. Vac. Sci. Technol. B 27 1238–40

[97] Chao C L, Chen C C, Chang C J, Dong H S, Ma K J, Hsu W Y, Huang K C and Chao C W 2007 Single-point diamond turning of plasma-nitrided stainless steel Key Eng. Mater. 364–366 601–6

[98] Brinksmeier E, Gl?be R and Osmer J 2010 Diamond cutting of FeN-layers on steel substrates for optical mould making Key Eng. Mater. 438 31–4

[99] Osmer J, Gl?be R and Brinksmeier E 2012 Chip formation in ultra-precision machining of nitrocarburized steels Key Eng. Mater. 516 293–8

[100] Dai T F, Fang F Z and Hu X T 2009 Tool wear study in diamond turning of steels J. Vac. Sci. Technol. B 27 1335–9

[101] Li Z J, Gong H, Tong W P, Fang F Z and Yang C 2014 Experimental study of diamond turnability of iron nitride J Tianjin Univ: Sci. Technol. Ed. 47 785–9

[102] Lee Y, Hao L, Luder J, Chaudhari A, Wang S, Manzhos S and Wang H 2019 Micromachining of ferrous metal with an ion implanted diamond cutting tool Carbon 152 598–608

[103] Liu X 2012 Basic research on mechanism and application of ionized gas jet assisted cutting Doctoral Dissertation Dalian University of Technology

[104] Tang Q C, Yin S H, Chen F J, Huang S and Luo H 2018 New technology for cutting ferrous metal with diamond tools Diam. Relat. Mater. 88 32–42

[105] Liu X, Huang S, Chen F Z, Yang X L, Wu L B and Xu W J 2014 Research on the cold plasma jet assisted cutting of Ti6Al4V Int. J. Adv. Manuf. Technol. 77 2125–33

[106] Yamaga J and Jido M 1976 Cooling method by use of corona discharge US Patent Specification US3938345

[107] Kishi K and Eda H 1976 Practical development in the machining process by use of the electrostatic cooling Int. J. Mach. Tool Manuf. Des. Res. 16 23–32

[108] Wakefield B D 1974 Electrostatic cooling doubles tool life Iron Age Metalwork. Int. 13 41–2

[109] Bastawros A F, Chandra A and Poosarla P A 2015 Atmospheric pressure plasma enabled polishing of single crystal sapphire CIRP Ann-Manuf. Techn. 64 515–8

[110] Katahira K, Ohmori H, Takesue S, Komotori J and Yamazaki K 2015 Effect of atmospheric-pressure plasma jet on polycrystalline diamond micro-milling of silicon carbide CIRP Ann-Manuf. Techn. 64 129–32

[111] Xu W J, Huang S, Chen F Z, Song J L and Liu X 2014 Diamond wear properties in cold plasma jet Diam. Relat. Mater. 48 96–103

[112] Huang S, Zheng H X, Liu J Y, Song J L, Chen F Z, Yang X L, Sun J, Xu W J and Liu X 2016 Fabrication of extreme wettability patterns with water-film protection for organic liquids J. Dispersion Sci. Technol. 38 566–9

[113] Huang S, Liu X, Chen F Z and Xu W J 2014 Tool wear properties of diamond-cutting ferrous metal Adv. Mater. Res. 1027 36–9

[114] Huang S, Liu X, Chen F Z, Zheng H X, Yang X L, Wu L B, Song J L and Xu W J 2015 Diamond-cutting ferrous metals assisted by cold plasma and ultrasonic elliptical vibration Int. J. Adv. Manuf. Technol. 85 673–81