[1] 韩婷, 温培源, 王晨雨, 等. 多孔阳极氧化铝模板制备的研究进展[J]. 材料导报, 2010, 24(1): 115-119.

    Han T, Wen P Y, Wang C Y, et al. Research progress in PAA template[J]. Materials Review, 2010, 24(1): 115-119.

[2] 郭治国, 刘晓东, 倪宇. 激光标刻在条码技术中的应用研究[J]. 激光杂志, 2004, 25(3): 72-73.

    Guo Z G, Liu X D, Ni Y. Applied research of laser marking in code bar[J]. Laser Journal, 2004, 25(3): 72-73.

[3] 丁阳喜, 周立志. 激光表面处理技术的现状及发展[J]. 热加工工艺, 2007, 36(6): 69-72.

    Ding Y X, Zhou L Z. Status and development of laser surface treating[J]. Metal Hotworking Technology, 2007, 36(6): 69-72.

[4] 韩红敏, 韩建平, 宋可为, 等. 铝合金的一种激光表面处理方法[J]. 固体火箭技术, 2017, 40(6): 776-779.

    Han H M, Han J P, Song K W, et al. A method of laser purge aluminum alloy[J]. Journal of Solid Rocket Technology, 2017, 40(6): 776-779.

[5] 高鸿志, 李建美, 霍孟友. 纳秒激光金属表面着色技术机理研究的发展与展望[J]. 应用激光, 2017, 37(5): 752-758.

    Gao H Z, Li J M, Huo M Y. Development and expectation of coloring mechanism of nanosecond laser on metal surface[J]. Applied Laser, 2017, 37(5): 752-758.

[6] 李阳博, 柏锋, 范文中, 等. 飞秒激光金属着色颜色差分析[J]. 光学学报, 2016, 36(7): 0714003.

    Li Y B, Bai F, Fan W Z, et al. Color difference analysis of femtosecond laser colorized metals[J]. Acta Optica Sinica, 2016, 36(7): 0714003.

[7] 谢志伟, 董世运, 闫世兴, 等. 皮秒激光微纳加工304不锈钢形貌调控[J]. 激光与光电子学进展, 2018, 55(3): 031402.

    Xie Z W, Dong S Y, Yan S X, et al. Morphological adjustment of 304 stainless steel by picosecond laser micro-nano fabrication[J]. Laser & Optoelectronics Progress, 2018, 55(3): 031402.

[8] 曹荣华. 激光直接标记二维条码的质量检测与评价技术研究[D]. 济南: 山东大学, 2012.

    Cao RH. Research on quality assessment and evaluation technique of 2D-barcodes using laser direct part marking[D]. Jinan: Shandong University, 2012.

[9] 陶亮, 李建美, 李云龙. 水辅助条件下金属表面激光标记二维条码质量检测与工艺优化[J]. 应用激光, 2017, 37(2): 268-275.

    Tao L, Li J M, Li Y L. Processing parameters optimization and quality inspection of water-assisted laser marking two dimensional barcodes on metal surfaces[J]. Applied Laser, 2017, 37(2): 268-275.

[10] 武玉松, 李建美, 路长厚, 等. 激光参数对铝合金表面标刻条码质量的影响研究[J]. 机电工程, 2014, 31(7): 865-869.

    Wu Y S, Li J M, Lu C H, et al. Influence of laser parameters on quality of laser direct marked data matrix symbols on aluminum alloy[J]. Mechanical & Electrical Engineering Magazine, 2014, 31(7): 865-869.

[11] 魏鑫磊, 李春林, 薛伟, 等. 激光标刻铝合金2维码的手机识读特性研究[J]. 激光技术, 2016, 40(5): 633-637.

    Wei X L, Li C L, Xue W, et al. Smart phone recognition characteristics of laser marking barcodes on aluminum alloy surface[J]. Laser Technology, 2016, 40(5): 633-637.

[12] Penide J, Quintero F, Riveiro A, et al. High contrast laser marking of alumina[J]. Applied Surface Science, 2015, 336: 118-128.

[13] Li X S, He W P, Lei L, et al. Laser direct marking applied to rasterizing miniature data matrix code on aluminum alloy[J]. Optics & Laser Technology, 2016, 77: 31-39.