[1] Aoki Yasuo, Ozono Shigeo. On a new method of roundness measurement based on the three-point method [J]. Journal of the Japan Society of Precision Engineering, 1966, 32(12): 27-32.

[2] Ma Yuzhen, Wang Xinhua, Kang Yanhui, et al. Roundness measurement and error separation technique [J]. Applied Mechanics and Materials, 2013, 303-306: 390-393.

[3] Whitehouse D J. Some theoretical aspects of error separation technique in surface metrology [J]. Journal of Physics E Scientific Instruments, 1976, 9(7): 531-536.

[4] Gao Wei, Kiyono Satoshi. High-accuracy roundness measurement by a new error separation method [J]. Precision Engineering, 1997, 21(2-3): 123-133.

[5] 洪迈生, 邓宗煌, 陈健强, 等. 精确的时域三点测量法圆度误差分离技术[J]. 上海交通大学学报, 2000, 34(10): 1317-1319.

    Hong Maisheng, Deng Zhonghuang, Chen Jianqiang, et al. Accurate time domain three point method for error separation of roundness[J]. Journal of Shanghai Jiaotong University, 2000, 34(10): 1317-1319. (in Chinese)

[6] Lei Xianqing, Zhang Chunyang, Xue Yujun, et al. Roundness error evaluation algorithm based on polar coordinate transform [J]. Measurement, 2011, 44(2): 345-350.

[7] Muralikrishnan B, Venkatachalam S, Raja J, et al. A note on the three-point method for roundness measurement[J]. Precision Engineering, 2005, 29(2): 257-260.

[8] 洪迈生, 魏元雷, 苏恒, 等. 三平行传感器式频域法误差分离技术——在线测量圆度误差的新方法[J]. 仪器仪表学报, 2003, 24(2): 152-156.

    Hong Maisheng, Wei Yuanlei, Su Heng, et al. A new method for on-machine measurement of roundness - error separation technique of parallel three-probe method in frequency domain[J]. Chinese Journal of Science Instrument, 2003, 24(2): 152-156. (in Chinese)

[9] GB/T 4380-2004, Assessment of departure from roundness-Two-and three-point methods[S]. 2005-07-01. (in Chinese)

[10] 刘杰, 李华, 付西红. 大尺寸筒状设备圆度误差测量系统[J]. 红外与激光工程, 2016, 45(1): 0117005.

    Liu Jie, Li Hua, Fu Xihong. Measurement system of large-scale sleeve roundness error[J]. Infrared and Laser Engineering, 2016,45(1): 0117005. (in Chinese)

[11] Yang T, Wang Z, Wu Z, et al. Calibration of laser beam direction for inner diameter measuring device[J]. Sensors, 2017, 17(2): 0294.

[12] 李超, 申力, 施斐斐. 同轴空心激光检测圆柱内孔圆度误差的方法研究[J]. 红外与激光工程, 2018, 47(S1): S106001.

    Li Chao, Shen Li, Shi Feifei. Research on the method of detecting the roundness error of cylindrical inner-hole by using coaxial hollow laser[J]. Infrared and Laser Engineering, 2018, 47(S1): S106001. (in Chinese)