一种基于工业CT图像的岩心孔隙率计算方法

针对目前基于工业CT图像的岩心孔隙计算中都采用局部自定义区域数据的问题,提出了一种基于岩心图像全部数据的孔隙率计算方法。其中,岩心目标的准确提取是该方法的关键。研究了图像中岩心目标与周边噪音的结构和位置关系,并以此为依据提出了一种工业CT图像的岩心目标提取算法。然后以CT图像中的岩心目标为数据源,通过目标内的孔隙像素与目标像素之比来计算单张图像的岩心孔隙率。而针对岩心的序列CT图像,则通过计算每张图像的孔隙率均值来获得该岩心的孔隙率。最后,以一岩心样本的CT序列图像为例,说明所提方法的准确性和有效性。

Abstract

A calculation method of core porosity based on core target data is proposed as a strategy to solve the problems caused by the current method based on industrial CT images which usually uses local region in images. The key of this method lies in the accurate extraction of the core target from industrial CT images. On the basis of a research of the structure and position relations of the core target and ambient noises in CT images, an effective method is proposed to accurately extract core target from industrial CT images. According to this method, the core porosity of a single CT image can be obtained by calculating the ratio of pore pixels to target pixels, with core target in industrial CT images used as data source. As for the core porosity based on a sequence of CT images, it can appeal to the calculation of the mean value of core porosity of each image in this sequence. Finally, this paper illustrates the accuracy and effectiveness of the method proposed in this research with an example of core porosity calculation based on a sequence of industrial CT images of a core sample.

参考文献

[1] Wang Wenjian. CT-based reverse engineering for precision inspection and shape analysis［D］. Cincinnati: University of Cincinnati, 1999: 5-9.

[2] 方黎勇, 白金平, 李辉, 等. 工业CT图像轮廓提取与优化系统设计［J］. 强激光与粒子束, 2012, 24(9): 2207-2211. (Fang Liyong, Bai Jinping, Li Hui, et al. Design of contour extraction and optimization system of industrial computed tomography images. High Power Laser and Particle Beams, 2012, 24(9): 2207-2211)

[3] 方黎勇, 李柏林,李辉, 等. 工业CT在反求工程上的应用［J］. 强激光与粒子束, 2013, 25(7): 1620-1624.(Fang Liyong, Li Bailin, Li Hui, et al. Application of industrial CT in reverse engineering technology. High Power Laser and Particle Beams, 2013, 25(7): 1620-1624)

[4] 段黎明, 叶勇, 张霞, 等. 面向快速原型的工业CT图像内外轮廓自适应判别方法［J］. 强激光与粒子束, 2013, 25(4): 1017-1020.(Duan Liming, Ye Yong, Zhang Xia, et al. Self-adaptive method to distinguish inner and outer contours of industrial computed tomography image for rapid prototype. High Power Laser and Particle Beams, 2013, 25(4): 1017-1020)

[5] Guo Liping, Cappinteri A, Sun Wei, et al. Measurement and analysis of defects in high-performance concrete with three-dimensional micro-computer tomography［J］. Journal of Southeast University, 2009, 25(1): 83-88.

[6] 赵阳升, 孟巧荣, 康天合, 等. 显微 CT 试验技术与花岗岩热破裂特征的细观研究［J］. 岩石力学与工程学报, 2008, 27(1): 28-34.(Zhao Yangsheng, Meng Qiaorong, Kang Tianhe, et al. Micro-CT experimental technology and meso-investigation on thermal fracturing characteristics of granite. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(1): 28-34)

[7] Peng R D, Yang Y C, Ju Y, et al. Computation of fractal dimension of rock pores based on gray CT images［J］. Chin Sci Bull, 2011, 56(26):2256-2266.

[8] 于艳梅,胡耀青,梁卫国,等. 应用ＣＴ技术研究瘦煤在不同温度下孔隙变化特征［J］. 地球物理学报, 2012, 55(2):637-644.(Yu Yanmei,Hu Yaoqing, Liang Weiguo, et al. Study on pore characteristics of lean coal at different temperature by CT technology. Chin J Geohys, 2012, 55(2): 637-644)

[9] 吕兆兴. 孔隙裂隙双重介质逾渗理论及应用研究［D］. 太原: 太原理工大学, 2008: 48-70.(Lü Zhaoxin. The theory and its application of percolation in pore and fracture double-medium. Taiyuan: Taiyuan University of Technology, 2008: 48-70)

[10] 李建胜,王东,康天合. 基于显微 CT 试验的岩石孔隙结构算法研究［J］. 岩土工程学报, 2010, 32(11): 1703-1708.(Li Jiansheng, Wang Dong, Kang Tianhe. Algorithmic study on rock pore structure based on micro-CT experiment. Chinese Journal of Geotechnical Engineering, 2010, 32(11): 1703-1708)

[11] Whitted T. An improved illumination model for shaded display［J］. Communications of the ACM, 1980, 23(6):343-349.

方黎勇, 陈鹏, 陈浩. 一种基于工业CT图像的岩心孔隙率计算方法[J]. 强激光与粒子束, 2014, 26(3): 034008. Fang Liyong, Chen Peng, Chen Hao. A calculation method of core porosity based on industrial CT images[J]. High Power Laser and Particle Beams, 2014, 26(3): 034008.

一种基于工业CT图像的岩心孔隙率计算方法

关于本站 Cookie 的使用提示

全站搜索

一种基于工业CT图像的岩心孔隙率计算方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索