红外与激光工程, 2016, 45 (11): 1136002, 网络出版: 2017-01-20   

变形镜在激光辐照下热畸变有限元模拟

Finite element simulation of thermal distortions of deformable mirror with laser irradiation
张耀平 1,2,*樊峻棋 1,2龙国云 1,2
作者单位
1 中国科学院光电技术研究所, 四川 成都 610209
2 中国科学院自适应光学重点实验室, 四川 成都 610209
摘要
利用有限元分析软件数值模拟了固体激光器系统中由单晶硅(Silicon)、石英(Silica)与超低膨胀玻璃(ULE)等不同材料制作的变形反射镜受激光辐照下的热畸变特性。计算结果表明: 当入射激光功率密度为 0.225 kW/cm2, 激光照射时间为 10 s, 镜面反射率为 99.9%时, 三种材料的变形镜的最大温升分别为0.804、6.751与7.122 ℃, 最大热变形分别为0.049 3、0.034 8与0.005 4 ?滋m, 相比之下, 单晶硅温升较小, 超低膨胀玻璃(ULE)的变形与应力最小, ULE是未来比较理想的镜面材料。最后, 对变形镜在长脉冲激光辐照下也进行了计算与分析。
Abstract
The thermal distortions of deformable mirror with such materials as mono-crystalline silicon, silica and nucleated glass(ULE), irradiated with diode-pumped solid-state laser(DPL) were calculated and analyzed using FEA software. The results show that when the power density of input laser is 0.225 kW/cm2, and the reflectivity of the deformable mirror thin film are 99.9%, the temperature rising and thermal distortions of the deformable mirror are separately 0.804, 6.751 and 7.122 ℃, and 0.049 3, 0.034 8 and 0.005 4 ?滋m respectivel, under the radiation time of 10 seconds. By comparison, the temperature rising of deformable mirror with mono-crystalline silicon substrate is smaller; the deformation and stress of ULE is the lowest, which would be a kind of more promising material for producing deformable mirror in future DPL laser system. In the end, some results of the long pulse laser irradiation were calculated and analysis.
参考文献

[1] 凌宁, 官春林, 王岚, 等. 61单元分立式压电变形反射镜的研制[J]. 强激光与粒子束, 1998, 10(4): 527-530.

    Ling Ning, Guan Chunlin, Wang Lan, et al. The development of 61-element discrete piezoelectric deformable mirror[J]. High Power Laser and Particle Beams, 1998, 10(4): 527-530. (in Chinese)

[2] 齐文宗, 黄伟, 张彬, 等. 红外连续激光反射镜热畸变的有限元分析[J]. 强激光与粒子束, 2004, 16(8): 953-956.

    Qi Weizong, Huang Wei, Zhang Bin, et al. Finite element analysis of thermal distortion of infrared CW laser reflectors [J]. High Power Laser and Particle Beams, 2004, 16(8): 953-956. (in Chinese)

[3] 王振宝, 吴勇, 杨鹏翎, 等. 强激光辐照铝靶温度分布数值模拟及实验研究[J]. 红外与激光工程, 2014, 43(7): 2061-2065.

    Wang Zhenbao, Wu Yong, Yang Pengling, et al. Numerical simulation and experiment on temperature fields distribution of aluminum target under intensive laser[J]. Infrared and Laser Engineering, 2014, 43(7): 2061-2065. (in Chinese)

[4] 刘剑, 陆建, 倪晓武, 等. 单晶硅片在脉冲激光作用下的断裂行为[J]. 光学 精密工程, 2011, 19(2): 414-420.

    Liu Jian, Lu Jian, Ni Xiaowu, et al. Fracture behavior during pulsed laser iriadiating silicon wafer[J]. Optics and Precision Engineering, 2011, 19(2): 414-420. (in Chinese)

[5] 曾志革, 凌宁, 饶学军. 能动薄镜面的有限元分析[J]. 光电工程, 1995, 22(2): 8-19.

    Zeng Zhige, Ling Ning, Rao Xuejun. Analysis for the finite element of the active thin mirror surface[J]. Opto-Electronic Engineering, 1995, 22(2): 8-19. (in Chinese)

[6] 张耀平, 许鸿, 凌宁, 等. 变形反射镜薄膜应力与元件变形有限元研究[J]. 光电工程, 2005, 32(8): 28-31.

    Zhang Yaoping, Xu Hong, Ling Ning, et al. The study on finite element analysis of the residual stress of thin film and component of deformable mirror[J]. Opto-Electronic Engineering, 2005, 32(8): 28-31. (in Chinese)

[7] 王玺, 卞进田, 李华, 等. 重频脉冲CO2激光损伤K9玻璃的实验[J]. 红外与激光工程, 2013, 42(5): 1204-1207.

    Wang Xi, Bian Jintian, Li Hua, et al. Experiment on damage in K9 glass due to repetition rate pulsed CO2 laser radiation[J]. Infrared and Laser Engineering, 2013, 42(5): 1204-1207. (in Chinese)

[8] 肖冬明, 何宽芳, 王迪. 基于多层有限元模型的激光选区熔化多层瞬态温度场演化规律研究[J]. 红外与激光工程, 2015, 44(9): 2672-2678.

    Xiao Dongming, He Kuanfang, Wang Di. Transient temperature evolution of selective laser melting process based on multilayer finite element model[J]. Infrared and Laser Engineering, 2015, 44(9): 2672-2678. (in Chinese)

[9] 汤伟, 吉桐伯, 郭劲, 等. 高重频CO2激光损伤HgCdTe晶体的数值分析[J]. 中国光学, 2013, 6(5): 736-741.

    Tang Wei, Ji Tongbo, Guo Jin, et al. Numerical analysis of HgCdTe crystal damaged by high repetition frequency CO2 lase[J]. Chinese Optic, 2013, 6(5): 736-741. (in Chinese)

[10] 陈兆兵, 郭劲, 林森. 有限元边界法在光电目标散射计算中的应用[J]. 中国光学, 2011, 4(2): 169-174.

    Chen Zhaobing, Guo Jin, Lin Sen. Application of FE-BIto calculation of opto-electronic target scattering [J]. Chinese Optic, 2011, 4(2): 169-174. (in Chinese)

[11] 张梁, 倪晓武, 陆建, 等. 长脉冲激光与硅相互作用气化过程的数值模拟[J]. 光学 精密工程, 2011, 19(2): 437-444.

    Zhang Liang, Ni Xiaowu, Lu Jian, et al. Numerical simulation of vaporization effect of long pulsed laser interaction with silicon[J]. Optics and Precision Engineering, 2011, 19(2): 437-444. (in Chinese)

张耀平, 樊峻棋, 龙国云. 变形镜在激光辐照下热畸变有限元模拟[J]. 红外与激光工程, 2016, 45(11): 1136002. Zhang Yaoping, Fan Junqi, Long Guoyun. Finite element simulation of thermal distortions of deformable mirror with laser irradiation[J]. Infrared and Laser Engineering, 2016, 45(11): 1136002.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!