载气式同轴送粉喷嘴的数值模拟及实验研究
[1] 张安峰, 李涤尘, 卢秉恒. 激光直接金属快速成形技术的研究进展[J]. 兵器材料科学与工程, 2007, 30(5): 68~72
Zhang Anfeng, Li Dichen, Lu Bingheng. Development of research on laser direct metal rapid prototyping technology [J].Ordnance Material Science and Engineering, 2007, 30(5): 68~72
[2] 钟敏霖, 刘文今. 国际激光材料加工研究的主导领域与热点[J]. 中国激光, 2008, 35(11): 1653~1659
[3] 杨森, 钟敏霖, 张庆茂 等. 金属零件的激光直接快速制造[J].粉末冶金技术, 2002, 20(4): 234~238
Yang Sen, Zhong Minlin, Zhang Qingmao et al.. Directly rapid fabrication of metal components by laser cladding [J]. Powder Metallurgy Technology, 2002, 20(4): 234~238
[4] 张魁武. 国外激光熔覆应用和直接熔覆金属零件及梯度材料制造 [J]. 金属热处理, 2002, 27(9): 1~4
Zhang Kuiwu. Industrial applications of laser clad and laser deposited metal parts and graded materials [J]. Heat Treatment of Metals, 2002, 27(9): 1~4
[5] 杨洗陈, 李会山, 刘运武 等. 激光再制造技术及其工业应用 [J]. 中国表面工程,2003, 16(4): 43~46
Yang Xichen, Li Huishan, Liu Yunwu et al.. Laser remanufacturing technology and its industrial application[J]. Chinese Surface Engineering, 2003, 16(4): 43~46
[6] 张冬云, 王瑞泽, 赵建哲 等. 激光直接制造金属零件技术的最新进展[J].中国激光,2010, 37(1): 18~25
[7] Lin Jehnming. Numerical simulation of the focused powder streams in coaxial laser cladding [J].J. Material Processing Technology, 2000, 105(1-2): 17~23
[8] 杨洗陈, 雷剑波, 刘运武 等. 激光制造中金属粉末流浓度场的检测 [J]. 中国激光, 2006, 33(7): 993~997
[9] 栗丽, 杨洗陈, 董哲. 激光熔覆中同轴粉末流温度场的CCD检测[J].中国激光, 2009, 36(9): 2431~2437
[10] 杨洗陈. 激光制造中同轴粉末流动量和质量传输[J].中国激光,2008, 35(11): 1664~1679
[11] 张安峰, 周志敏, 李涤尘 等. 同轴送粉喷嘴气固两相流流场的数值模拟 [J]. 西安交通大学学报,2008,42(9): 1169~1173
Zhang Anfeng, Zhou Zhimin, Li Dichen et al.. Numerical simulation of gas-solid two-phase flow field on coaxial powder nozzle in laser metal direct manufacturing [J]. J. Xi′an Jiaotong University, 2008, 42(9): 1169~1173
[12] Jichang Liu, Lijun Li. Study on cross-section clad profile in coaxial single-pass cladding with a low-power laser[J]. Optics & Laser Technology, 2005, 37(6): 478~482
[13] Li Peng, Ji Shengqin, Zeng Xiaoyan et al.. Direct laser fabrication of thin-walled metal parts under open-loop control [J]. Machine Tools & Manufacture, 2007, 47(6): 996~1002
[14] 黄卫东, 林鑫, 陈静 等. 激光立体成形[M]. 西安:西北工业大学出版社, 2007. 51~53
Huang Weidong, Lin Xin, Chen Jing et al.. Laser Solid Forming [M]. Xi′an: Northwestern Polytechnical University Press, 2007. 51~53
路桥潘, 张安峰, 李涤尘, 朱刚贤, 同治强, 付伟. 载气式同轴送粉喷嘴的数值模拟及实验研究[J]. 中国激光, 2010, 37(12): 3162. Lu Qiaopan, Zhang Anfeng, Li Dichen, Zhu Gangxian, Tong Zhiqiang, Fu Wei. Numerical Simulation and Experimental Research on Gas-Carrier Coaxial Powder Nozzle[J]. Chinese Journal of Lasers, 2010, 37(12): 3162.