局部负压激光焊缝成形特点及其影响因素
[1] 梅丽芳, 陈根余, 金湘中, 等. 车用铝合金光纤激光搭接焊的研究[J]. 中国激光, 2010, 37(8): 2091-2097.
[2] 王文先, 张亚楠, 崔泽琴, 等. 双面超薄不锈钢复合板激光焊接接头组织性能研究[J]. 中国激光, 2011, 38(5): 0503002.
[3] 黄坚, 李铸国, 唐新华. 中厚板的高功率激光焊接[J]. 航空制造技术, 2010, 2: 26-29.
Huang Jian, Li Zhuguo, Tang Xinhua. High-power laser welding of plate[J]. Aeronautical Manufacturing Technology, 2010, 2: 26-29.
[4] 吴世凯, 肖荣诗, 陈铠. 大厚度不锈钢板的激光焊接[J]. 中国激光, 2009, 36(9): 2422-2425.
[5] F Vollertsen, C Thomy. Welding with fiber lasers from 200~17000 W[C]. International Inst of Welding London, 2005. 254-263.
[6] Wang Chunming, Meng Xuanxuan, Huang Wei, et al.. Role of side assisting gas on plasma and energy transmission during CO2 laser welding[J]. Journal of Materials Processing Technology, 2011, 211(4): 668-674.
[7] 张屹, 李时春, 金湘中, 等. 镀锌钢板激光焊接关键技术研究[J]. 激光与光电子学进展, 2010, 47: 071401.
[8] Y Arata, N Abe, T Oda, et al.. Fundamental Phenomena During Vacuum Laser Welding[M]. International Inst of Welding London, 1985, 4.
[9] A Verwaerde, R Fabbro, G Deshors. Experimental study of continuous CO2 laser welding at subatmosphericpressures[J]. J Appl Phys, 1995, 78(5): 2981-2984.
[10] Seiji Katayama, Yoshihiro Kobayashi, Masami Mizutani, et al.. Effect of vacuum on penetration and defects in laser welding[J]. J Laser Appl, 2001, 13(5): 187-192.
[11] Seiji Katayama, AbeYohei, Masami Mizutani, et al.. Development of deep penetration welding technology with high brightness laser under vacuum[J]. Physics Procedia, 2011, 12(A): 75-80.
[12] Christian Brner, Thomas Krüssel, Klaus Dilger. Process characteristics of laser beam welding at reduced ambient pressure[C]. SPIE, 2013, 8603: 86030M.
罗燕, 唐新华, 芦凤桂, 陈钦涛, 崔海超. 局部负压激光焊缝成形特点及其影响因素[J]. 中国激光, 2014, 41(6): 0603008. Luo Yan, Tang Xinhua, Lu Fenggui, Chen Qintao, Cui Haichao. Effects of Welding Parameters on Bead Formation of Laser Welding under Subatmospheric Pressures[J]. Chinese Journal of Lasers, 2014, 41(6): 0603008.