热传导环境因素对激光熔覆成形质量的影响
[1] JIAO X, WANG J, WANG C, et al.Effect of laser scanning speed on microstructure and wear properties of T15M cladding coating fabricated by laser cladding technology[J]. Optics and Lasers in Engineering, 2018(110): 163-171.
[2] 江吉彬, 练国富, 许明三.激光熔覆技术研究现状及趋势[J].重庆理工大学学报(自然科学), 2015, 29(1): 27-36.
[3] 张瑞珠, 李林杰, 唐明奇, 等.激光熔覆技术的研究进展[J].热处理技术与装备, 2017, 38(3): 7-11.
[4] 高东强, 王蕊, 陈威, 等.激光熔覆改善材料性能的研究进展[J].热加工工艺, 2017(12): 14-18.
[5] TAO Y F, LI J, LV Y H, et al.Effect of heat treatment on residual stress and wear behaviors of the TiNi/Ti 2 Ni based laser cladding composite coatings[J].Optics & Laser Technology, 2017(97): 379-389.
[6] 刘秀波, 周仲炎, 翟永杰, 等.热处理对激光熔覆钛基复合涂层组织和微动磨损性能的影响[J].材料工程, 2018, 46(5): 79-85.
[7] 李德英, 张坚, 赵龙志, 等.CA法研究超声频率对激光熔覆凝固组织的影响[J].兵器材料科学与工程, 2018(1): 93-96.
[8] DAI X, ZHOU S, WANG M, et al.Effect of substrate types on the microstructure and properties of Cu65Fe35 composite coatings by laser induction hybrid cladding[J].Journal of Alloys & Compounds, 2017(722): 173-182.
[9] CHEN L, BAI S L.The anti-corrosion behavior under multi-factor impingement of Hastelloy C22 coating prepared by multilayer laser cladding[J].Applied Surface Science, 2018(437): 1-12.
[10] FENG X, CUI X, JIN G, et al.Underwater laser cladding in full wet surroundings for fabrication of nickel aluminum bronze coatings[J].Surface and Coatings Technology, 2018(333): 104-114.
[11] LAI Q, ABRAHAMS R, YAN W, et al.Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels[J].Materials Science and Engineering: A, 2018(712): 548-563.
[12] 张洋, 宋博瀚, 薛峰.稀释率对镍基合金激光熔覆层组织和性能的影响[J].应用激光, 2016(3): 259-264.
[13] 黄凤晓.激光熔覆和熔覆成形镍基合金的组织与性能研究[D].长春: 吉林大学, 2011.
[14] WEINGARTEN C, BUCHBINDER D, PIRCH N, et al.Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg[J].Journal of Materials Processing Technology, 2015(221): 112-120.
练国富, 张浩, 黄旭, 陈昌荣, 江吉彬. 热传导环境因素对激光熔覆成形质量的影响[J]. 应用激光, 2018, 38(5): 705. Lian Guofu, Zhang Hao, Huang Xu, Chen Changrong, Jiang Jibin. In fluence of Heat Conduction Environmental Factors on the Forming Quality of Laser Cladding[J]. APPLIED LASER, 2018, 38(5): 705.