[1] 朱勇健, 潘卫清. 非球面面形测量技术[J]. 激光与光电子学进展, 2010, 47(1): 11202.

    Zhu Yongjian, Pan Weiqing. Measurement of aspheric surface[J]. Laser & Optoelectronics Progress, 2010, 47(1): 11202.

[2] 宋强, 杨宝喜, 袁乔,等. 大口径凸非球面面形检测方法研究[J]. 中国激光, 2014, 41(4): 0408003-1-7.

    Song Qiang, Yang Baoxi, Yuan Qiao, et al. Study on large convex aspherical lens testing[J]. Chinese Journal of Lasers, 2014, 41(4): 0408003-1-7.

[3] Greivenkamp J E. Design and calibration of large dynamic range optical metrology systems[J]. Optical Devices and Instruments, 2005, 6024: 602403.

[4] 邢振冲, 张葆, 洪永丰. 一种小口径凸非球面补偿器的设计[J]. 中国激光, 2015, 42(11): 1116001-1-8.

    Xing Zhenchong, Zhang Bao, Hong Yongfeng. Design of compensator of convex aspheric surface with small apertures[J]. Chinese Journal of Lasers, 2015, 42(11): 1116001-1-8.

[5] 张凤生. 非球面系统中高斯光束传输的数值计算[J]. 光学学报, 2008, 28(1): 179-183.

    Zhang Fengsheng. Numerical computation for propagation of Gaussian beam through aspheric system[J]. Acta Optica Sinica, 2008, 28(1): 179-183.

[6] 谢意, 陈强, 伍凡,等. 用双计算全息图检测凹非球面[J]. 光学学报, 2008, 8(7): 1313-1317.

    Xie Yi, Chen Qiang, Wu Fan, et al. Concave aspherical surface testing with twin computer-generated holograms[J]. Acta OpticaSinica, 2008, 28(7): 1313-1317.

[7] Wang X K ,Wang L H ,Yin L H , et al. Measurement of large aspheric surfaces byannular subaperture stitching interferometry[J]. Chin. Opt. Lett., 2007, 5(11): 645-647.

[8] 刘慧兰, 郝群, 朱秋东, 等. 利用部分补偿透镜进行非球面面形测量[J]. 北京理工大学学报, 2004, 24(7): 625-628.

    Liu Huilan, Hao Qun, Zhu Qiudong, et al. Testing an aspheric surface using part-compensating lens[J]. Transactions of Beijing Institute of Technology, 2004, 24(7): 625-628.

[9] Liu Huilan, Zhu Qiudong, Hao Qun, et al. Design of novel part-compensating lens used in aspheric testing[J].SPIE, 2003, 5253: 480-485.

[10] 孟晓辰, 郝群, 朱秋东,等. 基于Zemax的部分补偿透镜的优化设计[J]. 光学学报, 2011, 31(6): 0622002-1-7.

    Meng Xiaochen, Hao Qun, Zhu Qiudong, et al. Optimization design of partially compensating lens based on Zemax[J]. Acta Optica Sinica, 2011, 31(6): 0622002-1-7.

[11] 王孝坤, 张学军, 王丽辉,等. 环形子孔径拼接干涉检测非球面的数学模型和仿真研究[J]. 光学精密工程, 2006, 14(4): 527-532.

    Wang Xiaokun, Zhang Xuejun, Wang Lihui, et al. Mathematical model and simulation for testing aspheric surface by annular subaperture stitching interferometry[J]. Optics and Precision Engineering, 2006,14(4): 527-532.

[12] 王孝坤, 王丽辉, 张学军,等. 子孔径拼接法检测非球面[J]. 光学精密工程, 2007, 15(2): 192-198.

    Wang Xiaokun, Wang Lihui, Zhang Xuejun, et al. Testing asphere by subaperture stitching interferometric method[J]. Optics and Precision Engineering, 2007, 15(2): 192-198.

[13] 李锐刚, 郑立功, 薛栋林,等. 大口径高次、离轴非球面干涉测量中投影畸变的标定方法[J]. 光学精密工程, 2006, 14(8): 347-352.

    Li Ruigang, Zheng Ligong, Xue Donglin, et al. Calibration method for projection distortion in interferometric testing high order and off-axis aspheric surface with big aperture[J]. Optics and Precision Engineering, 2006, 14(8): 347-352.

[14] 王孝坤, 张学军. 环形子孔径拼接检测非球面中的数据处理和标定[J]. 激光与光电子学进展, 2009, 46(1): 51-55.

    Wang Xiaokun, Zhang Xuejun. Data processing and calibration for testing aspheric surfaces by annular aubaperture stitching interferometry[J]. Laser & Optoelectronics Progress, 2009, 46(1): 51-55.

[15] Wang X K ,Zheng L G , Zhang B Z , et al. Subaperture stitching interferometry for testing of a large hyperboloid[J]. Infrared and Laser Engineering, 2009, 38(1): 88-93.