[1] Sun L P, Lin G Y, Liu J, et al. Effect of low temperature thermo-mechanical treatment on microstructures and mechanical properties of TC4 alloy[J]. Journal of Central South University of Technology, 2010, 17(3): 443-448.

[2] 姬书得, 温泉, 马琳, 等. TC4钛合金搅拌摩擦焊厚度方向的显微组织[J]. 金属学报, 2015, 51(11): 1391-1399.

    Ji Shude, Wen Quan, Ma Lin, et al. Microstructure along thickness direction of friction stir welding TC4 titanium alloy joint[J]. Acta Metallurgica Sinica, 2015, 51(11): 1391-1399.

[3] 陈曦, 姚刚, 黄锐, 等. TC4钛合金加入铝夹层的激光焊接[J]. 中国激光, 2013, 40(6): 0603006.

    Chen Xi, Yao Gang, Huang Rui, et al. Laser welding of TC4 titanium with aluminum insert[J]. Chinese J Lasers, 2013, 40(6): 0603006.

[4] 夏长清, 李佳, 古一, 等. NiCrAlY涂层/TC4基体界面反应机理[J]. 中南大学学报(自然科学版), 2005, 36(4): 550-554.

    Xia Changqing, Li Jia, Gu Yi, et al. Interaction behavior between NiCrAIY coating and TC4 alloy substrate[J]. Journal of Central South University (Science and Technology), 2005, 36(4): 550-554.

[5] 张升, 桂睿智, 魏青松, 等. 选择性激光熔化成形TC4钛合金开裂行为及其机理研究[J]. 机械工程学报, 2013, 49(23): 21-27.

    Zhang Sheng, Gui Ruizhi, Wei Qingsong, et al. Cracking behavior and formation mechanism of TC4 alloy formed by selective laser melting[J]. Journal of Mechanical Engineering, 2013, 49(23): 21-27.

[6] Diószegi A, Elmquist L, Orlenius J, et al. Defect formation of gray iron casting[J]. International Journal of Metalcasting, 2009, 3(4): 49-58.

[7] Samavedam S, Sundarrajan S. Al-Si and Al-Si-Mg cast alloys shrinkage porosity estimation[J]. Archives of Foundry Engineering, 2016, 16(1): 61-68.

[8] 谢旭霞, 张述泉, 汤海波, 等. 退火温度对激光熔化沉积TA15钛合金组织和性能的影响[J]. 稀有金属材料与工程, 2008, 37(9): 1510-1515.

    Xie Xuxia, Zhang Shuquan, Tang Haibo, et al. Effect of annealing temperatures on microstructure and mechanical properties of laser melting deposited TA15 titanium alloy[J]. Rare Metal Materials and Engineering, 2008, 37(9): 1510-1515.

[9] 杨永强, 王迪, 吴伟辉. 金属零件选区激光熔化直接成型技术研究进展[J]. 中国激光, 2011, 38(6): 0601007.

    Yang Yongqiang, Wang Di, Wu Weihui. Research progress of direct manufacturing of metal parts by selective laser melting[J]. Chinese J Lasers, 2011, 38(6): 0601007.

[10] Han J C, Xiao S L, Tian J, et al. Microstructure characterization and tensile properties of a Ni-containing TiAl-based alloy with heat treatment[J]. Rare Metals, 2016, 35(1): 26-34.

[11] Vrancken B, Thijs L, Kruth J P, et al. Heat treatment of Ti6Al4V produced by selective laser melting: Microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 2012, 541: 177-185.

[12] 梁晓康, 董鹏, 陈济轮, 等. 激光选区熔化成形Ti-6Al-4V钛合金的显微组织及性能[J]. 应用激光, 2014, 34(2): 101-104.

    Liang Xiaokang, Dong Peng, Chen Jilun, et al. Microstructure and mechanical properties of selective laser melting Ti-6Al-4V alloy[J]. Applied laser, 2014, 34(2): 101-104.

[13] 陈静, 张霜银, 薛蕾, 等. 激光快速成形Ti-6Al-4V合金力学性能[J]. 稀有金属材料与工程, 2007, 36(3): 475-479.

    Chen Jing, Zhang Shuangyin, Xue Lei, et al. Mechanical properties of Ti-6Al-4V alloy by laser rapid forming[J]. Rare Metal Materials and Engineering, 2007, 36(3): 475-479.

[14] Gu D D, Meiners W, Wissenbach K, et al. Laser additive manufacturing of metallic components: Materials, processes and mechanisms[J]. International Materials Reviews, 2012, 57(3): 133-164.

[15] Jie L I, Liu Y Y, Wang Q J, et al. Effect of continuous variable cross-section recycling extrusion on microstructure of TC4 alloy[J]. Chinese Journal of Nonferrous Metals, 2015, 25(2): 344-350.

[16] 王堃, 孟牧, 王华明, 等. 热处理及激光多道搭接对激光熔化沉积TC18钛合金组织的影响[J]. 红外与激光工程, 2010, 39(3): 521-525.

    Wang Kun, Meng Mu, Wang Huaming. Effect of heat treatment and laser multi-track overlapping on microstructure of a laser melting deposition TC18 titanium alloy[J]. Infrared and Laser Engineering, 2010, 39(3): 521-525.

[17] 孙龙生, 吴金满. 熔炼方法和锻造温度对TC4锻饼组织性能的影响[J]. 金属学报, 2002, 38(s1): 337-338.

    Sun Longsheng, Wu Jinman. Effect of melting method and forging temperature on TC4 disc[J]. Acta Metallurgica Sinica, 2002, 38(s1): 337-338.

[18] Sun S D, Zong Y Y, Shan D B, et al. Hot deformation behavior and microstructure evolution of TC4 titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(11): 2181-2184.

[19] 董智军 , 吕涛 , 雷正龙 , 等 . 激光焊接TC4钛合金组织性能研究[J]. 航天制造技术 , 2013 ( 1 ): 27 - 30 .

    DongZhijun , LüTao , LeiZhenglong , et al . Microstructure and mechanical properties of laser welded TC4 alloys[J]. Aerospace Manufacturing Technology , 2013 ( 1 ): 27 - 30 .

[20] Yang J, Han J, Yu H, et al. Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy[J]. Materials & Design, 2016, 110: 558-570.

[21] Peng X N, Guo H Z, Shi Z F, et al. Microstructure characterization and mechanical properties of TC4-DT titanium alloy after thermomechanical treatment[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(3): 682-689.

[22] 黄正阳, 郭子静, 文光平, 等. 不同工艺退火后TC4合金的力学性能[J]. 金属热处理, 2015, 40(9): 175-179.

    Huang Zhengyang, Guo Zijing, Wen Guangping, et al. Mechanical properties of TC4 alloy annealed with different processes[J]. Heat Treatment of Metals, 2015, 40(9): 175-179.

[23] 张凯, 刘婷婷, 张长东, 等. 基于熔池数据分析的激光选区熔化成形件翘曲变形行为研究[J]. 中国激光, 2015, 42(9): 0903007.

    Zhang Kai, Liu Tingting, Zhang Changdong, et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data[J]. Chinese J Lasers, 2015, 42(9): 0903007.

[24] Kruth J P, Levy G, Klocke F, et al. Consolidation phenomena in laser and powder-bed based layered manufacturing[J]. CIRP Annals-Manufacturing Technology, 2007, 56(2): 730-759.