焊接缺陷磁光成像动态检测与识别

高向东; 蓝重洲; 陈子琴; 游德勇; 李国华

doi:doi:10.3788/ope.20172505.1135

光学精密工程, 2017, 25 (5): 1135, 网络出版: 2017-06-30

焊接缺陷磁光成像动态检测与识别

Dynamic detection and recognition of welded defects based on magneto-optical imaging

论文大纲

高向东 ^*蓝重洲陈子琴游德勇李国华

作者单位

广东工业大学机电工程学院, 广东广州 510006

动态磁光成像焊接缺陷交变磁场模式识别 dynamic magneto-optical imaging welded defect alternating magnetic field pattern recognition

摘要

为了实现焊接缺陷的自动检测, 研究一种交变磁场激励下焊缝表面及亚表面缺陷的磁光成像动态无损检测方法。分析了基于法拉第磁致旋光效应的焊接缺陷磁光成像机理, 并结合交变磁场原理推导出励磁变化与动态磁光成像的关系。探索低碳钢板的亚表面焊缝磁光成像特征试验, 验证了所提方法可用于检测焊缝亚表面的未熔合缺陷。最后对高强钢焊缝特征的动态磁光图像进行分析, 采用主成分分析法和支持向量机(PCA-SVM)模式识别方法建立了焊接缺陷分类模型。试验结果表明, 所提方法可以识别高强钢焊件中的焊缝特征(未熔透、裂纹、凹坑和无缺陷), 缺陷分类模型的整体识别率达到92.6%, 能够实现焊缝表面及亚表面缺陷的自动检测。

Abstract

To realize automatic inspection of welded defects, a dynamic magneto-optical imaging non-destructive detection of weld surface and subsurface defects under alternating magnetic field excitation was researched. The welded defect magneto-optical imaging mechanism based on Faraday magneto optical effect was analyzed and employed to derive the relationship between excitation variation and dynamic magneto-optical imaging by combining with alternating magnetic field principle. The subsurface weld magneto-optical imaging feature test of low-carbon steel was investigated, verifying that the proposed method could be used to detect incomplete penetration defects of weld surface. Finally, dynamic magneto-optical image of high-strength steel weld feature was analyzed and weld defect classification model was constructed through Principal Component Analysis and Support Vector Machine (PCA-SVM) mode recognition method. The result shows that the proposed method can recognize weld features (penetration, crack, sag and perfectness) in high-strength steel weldment with the entire recognition rate of defect classification model reaches to 92.6%, subsequently the automatic inspection of weld surface and subsurface defects can be realized.

参考文献

[1] GHARSALLAH M B, BRAIEK E B. Weld inspection based on radiography image segmentation with level set active contour guided off-center saliency map ［J］. Advances in Materials Science & Engineering, 2015, 2015: 871602-1-10.

[2] TABATABAEIPOUR M, HETTLER J, DELRUE S, et al.. Non-destructive ultrasonic examination of root defects in friction stir welded butt-joints ［J］. NDT & E International, 2016, 80: 23-34.

[3] MIZUKAMI K, MIZUTANI Y, TODOROKI A, et al.. Detection of delamination in thermoplastic CFRP welded zones using induction heating assisted eddy current testing［J］. NDT & E International, 2015, 74: 106-111.

[4] FITZPATRICK G L, THOME D K, SKAUGSET R L, et al.. Magneto-optic/eddy current imaging of aging aircraft: a new NDI technique ［J］. Materials Evaluation, 1993, 51(12): 1402-1407.

[5] RADTKE U, ZIELKE R, RADEMACHER H G, et al.. Application of magneto-optical method for real-time visualization of eddy currents with high spatial resolution for nondestructive testing ［J］. Optics and Lasers in Engineering, 2001, 36(3): 251-268.

[6] LE M, LEE J, SHOJI T. A simulation of magneto-optical eddy current imaging ［J］.NDT & E International, 2011, 44(8): 783-788.

[7] 程玉华, 周肇飞, 尹伯彪. 磁光/涡流实时成像检测系统的研究［J］. 光学精密工程, 2006, 14(5): 797-801.

CHEN Y H, ZHOU ZH F, YIN B B. Study on magneto optical/eddy current imaging system for real-time testing ［J］.Opt. Precision Eng., 2006, 14(5): 797-801. (in Chinese)

[8] GAO X D, CHEN Y Q, YOU D Y, et al.. Detection of micro gap weld joint by using magneto-optical imaging and Kalman filtering compensated with RBF neural network ［J］. Mechanical Systems and Signal Processing, 2017, 84: 570-583.

[9] 高向东, 莫玲, 萧振林, 等.微间隙焊缝磁光成像卡尔曼滤波跟踪算法［J］.机械工程学报, 2016, 52(4): 67-72.

GAO X D, MO L, XIAO ZH L, et al.. Micro-gap weld tracking based on Kalman filtering of magneto-optical images ［J］. Journal of Mechanical Engineering, 2016, 52(4): 67-72. (in Chinese)

[10] 高向东, 李国华, 萧振林, 等. 焊接缺陷的磁光成像小波多尺度识别及分类［J］. 光学精密工程, 2016, 24(4): 930-936.

GAO X D, LI G H, XIAO ZH L, et al.. Detection and classification of welded defects by magneto-optical imaging based on multi-scale wavelet ［J］. Opt. Precision Eng., 2016, 24(4): 930-936. (in Chinese)

[11] TSE W K, MACDONALD A H. Giant magneto-optical Kerr effect and universal Faraday effect in thin-film topological insulators ［J］. Physical Review Letters, 2010, 105(5): 057401.

[12] RICHERT H, SCHMIDT H, LINDNER S, et al.. Dynamic magneto-optical imaging of domains in grain-oriented electrical steel ［J］. Steel Research International, 2016, 87(2): 232-240.

[13] 王庆国, 潘华锦, 张灵振, 等. 漏磁法无损检测中铁磁材料内部磁场分布的研究［J］. 无损检测, 2001, 23(1): 6-8.

WANG Q G, PAN H J, ZHANG L ZH, et al.. A research on the distribution of magnetic field in ferromagnetic materials for magnetic leakage flux nondestructive testing ［J］. Nondestructive Testing, 2001, 23(1): 6-8.(in Chinese)

[14] 李海森, 张艳宁, 姚睿, 等. 基于主成分分析的直线运动模糊参数估计［J］. 光学精密工程, 2013, 21(10): 2656-2663.

LI H S, ZHANG Y N, YAO R, et al.. Parameter estimation of linear motion blur based on principal component analysis ［J］.Opt. Precision Eng., 2013, 21(10): 2656-2663. (in Chinese)

[15] 韩彦彬, 白广忱, 李晓颖, 等. 基于支持向量机柔性机构动态可靠性分析［J］. 机械工程学报, 2014, 50(11): 86-92.

HAN Y B, BAI G ZH, LI X Y, et al.. Dynamic reliability analysis of flexible mechanism based on support vector machine ［J］. Journal of Mechanical Engineering, 2014, 50(11): 86-92.(in Chinese)

高向东, 蓝重洲, 陈子琴, 游德勇, 李国华. 焊接缺陷磁光成像动态检测与识别[J]. 光学精密工程, 2017, 25(5): 1135. GAO Xiang-dong, LAN Chong-zhou, CHEN Zi-qin, YOU De-yong, LI Guo-hua. Dynamic detection and recognition of welded defects based on magneto-optical imaging[J]. Optics and Precision Engineering, 2017, 25(5): 1135.

焊接缺陷磁光成像动态检测与识别

关于本站 Cookie 的使用提示

全站搜索

焊接缺陷磁光成像动态检测与识别

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索