[1] 叶井飞, 徐凯迪, 杨明珠, 等. 基于自由曲面的离轴两反头戴显示光学系统设计[J]. 光学学报, 2018, 38(7): 0722003.

    Ye J F, Xu K D, Yang M Z, et al. Design of off-axis head-mounted display optical system based on two reflective optical free-form surfaces[J]. Acta Optica Sinica, 2018, 38(7): 0722003.

[2] 关姝, 王超, 佟首峰, 等. 空间激光通信离轴两镜反射望远镜自由曲面光学天线设计[J]. 红外与激光工程, 2017, 46(12): 1222003.

    Guan S, Wang C, Tong S F, et al. Optical antenna design of off-axis two-mirror reflective telescope with freeform surface for space laser communication[J]. Infrared and Laser Engineering, 2017, 46(12): 1222003.

[3] 倪栋伟, 李旭阳, 杨明洋, 等. 基于自由曲面的大视场天基探测光学系统[J]. 光学学报, 2018, 38(11): 1122003.

    Ni D W, Li X Y, Yang M Y, et al. Large field of view space-based optical detection system based on freeform surfaces[J]. Acta Optica Sinica, 2018, 38(11): 1122003.

[4] Jiang X, Scott P, Whitehouse D. Freeform surface characterisation-a fresh strategy[J]. CIRP Annals, 2007, 56(1): 553-556.

[5] Fang F Z, Zhang X D, Hu X T. Cylindrical coordinate machining of optical freeform surfaces[J]. Optics Express, 2008, 16(10): 7323-7329.

[6] Kenneth G, Bruegge T, Hoffman J, et al. Design tools for freeform optics[J]. Proceedings of SPIE, 2005, 5874: 58740A.

[7] 徐恺, 贾志刚, 房丰洲. 人眼实际观察状态下的自由曲面眼镜片的透射波前像差测量[J]. 光学学报, 2018, 38(2): 0212001.

    Xu K, Jia Z G, Fang F Z. Measurement of transmission wavefront aberration of freeform spectacle lenses in real viewing condition of human eye[J]. Acta Optica Sinica, 2018, 38(2): 0212001.

[8] Zhu L L, Li Z X, Fang F Z, et al. Review on fast tool servo machining of optical freeform surfaces[J]. The International Journal of Advanced Manufacturing Technology, 2018, 95: 2071-2092.

[9] Yu D P, Wong Y S, Hong G S. Optimal selection of machining parameters for fast tool servo diamond turning[J]. The International Journal of Advanced Manufacturing Technology, 2011, 57: 85-99.

[10] Kim H S, Kim E J, Song B S. Diamond turning of large off-axis aspheric mirrors using a fast tool servo with on-machine measurement[J]. Journal of Materials Processing Technology, 2004, 146(3): 349-355.

[11] Wu Q H, Sun Y Z, Chen W Q, et al. Theoretical and experimental investigation of spindle axial drift and its effect on surface topography in ultra-precision diamond turning[J]. International Journal of Machine Tools and Manufacture, 2017, 116: 107-113.

[12] 李荣彬, 张志辉, 杜雪, 等. 自由曲面光学的超精密加工技术及其应用[J]. 红外与激光工程, 2010, 39(1): 110-115.

    Li R B, Zhang Z H, Du X, et al. Ultra-precision machining technology of freeform optics and its applications[J]. Infrared and Laser Engineering, 2010, 39(1): 110-115.

[13] 关朝亮, 戴一帆, 尹自强. 自由曲面光学元件的慢刀伺服车削加工技术[J]. 激光与光电子学进展, 2010, 47(2): 022202.

    Guan C L, Dai Y F, Yin Z Q. Freeform surface optical components machining by slow tool servo diamond turning[J]. Laser & Optoelectronics Progress, 2010, 47(2): 022202.

[14] 于慧娟. 光学自由曲面单点金刚石超精密车削理论与技术研究[D]. 长春: 吉林大学, 2015: 19- 30.

    Yu HJ. Theoretical and technological research on optical freeform surface of single point diamond ultra-precision turning[D]. Changchun: Jilin University, 2015: 19- 30.

[15] 关朝亮, 铁贵鹏, 尹自强. 光学阵列器件的慢刀伺服车削加工技术[J]. 国防科技大学学报, 2009, 31(4): 31-35, 47.

    Guan C L, Tie G P, Yin Z Q. Fabrication of array lens optical component by using of slow tool servo diamond turning[J]. Journal of National University of Defense Technology, 2009, 31(4): 31-35, 47.

[16] Yin ZQ, Dai YF, Li SY, et al. and Manufacture, 2011, 51(5): 404-410. n