基于铜合金中间层的钛合金与不锈钢激光电弧复合热源焊接研究

王红阳; 李权; 宋刚; 刘黎明

doi:doi:10.3788/cjl201643.0503002

中国激光, 2016, 43 (5): 0503002, 网络出版: 2016-05-04

基于铜合金中间层的钛合金与不锈钢激光电弧复合热源焊接研究下载： 544次

Laser-Arc Hybrid Welding of Titanium Alloy and Stainless Steel with Copper Interlayer

论文大纲

王红阳 ^*李权宋刚刘黎明

作者单位

大连理工大学材料科学与工程学院辽宁省先进材料连接技术重点实验室, 辽宁大连 116024

AI 词云图 AI一句话精读 AI短摘要

注：本部分内容由 AI 自动生成，请您知悉。

摘要

运用激光电弧复合热源焊接方法，通过添加Cu-Zn中间层实现了TC4钛合金与304不锈钢的良好焊接，并对搭接接头横截面形貌、微观组织、相成分、力学性能及断裂位置进行了分析。结果表明，钛合金与不锈钢复合焊接接头过渡区组织成分主要包括Ti-Cu金属间化合物、铜基固溶体及Fe-Cu共析混合物。随着激光功率的增加，在钛铜界面一侧，生成的Ti-Cu金属间化合物厚度逐渐增大，对接头性能产生不良影响，激光功率较大时断裂发生在钛铜界面处。在铜不锈钢界面一侧，Cu和Fe元素互扩散的深度和密度随激光功率的增大逐渐增加，有利于提高接头性能，激光功率较小时断裂发生在铜不锈钢界面处。实现钛合金与不锈钢的良好焊接的关键在于Ti-Cu金属间化合物与Fe-Cu共析混合物的协调控制。

Abstract

The TC4 titanium alloy and 304 stainless steel are welded by laser-arc hybrid heat source with copper interlayer. Macrostructure and microstructure of cross sections, main compositions, mechanical properties and fracture positions of welding joints are examined. The results show that the transition zone is characterized by Ti-Cu intermetallic, solid solution of copper, and Fe-Cu eutectic mixture. With the increase of laser power, the thickness of Ti-Cu intermetallic near the Ti-Cu interface increases, which has harmful effect on mechanical properties. Fracture of joint mainly happens at the interface between titanium alloy and copper when laser power is higher. The mutual diffusion depth and density of elements, such as copper and iron near the interface between copper and stainless steel, also increase, which is beneficial to enhancing mechanical properties. Fracture of joint mainly happens at the interface between the copper and stainless steel when laser power is lower. The key point to achieve favorite welding joint is the control of Ti-Cu intermetallic and Fe-Cu eutectic mixture.

参考文献

[1] 朱知寿. 我国航空用钛合金技术研究现状及发展[J]. 航空材料学报, 2014, 34(4): 44-50.

Zhu Zhishou. Recent research and development of titanium alloys for aviation application in China[J]. Journal of Aeronautical Materials, 2014, 34(4): 44-50.

[2] 于振涛, 余森, 张明华, 等. 外科植入物用新型医用钛合金材料设计、开发与应用现状及进展[J]. 中国材料进展, 2010, 29(12): 35-51.

Yu Zhentao, Yu Sen, Zhang Minghua, et al.. Design, development and application of novel biomedical Ti alloy materials applied in surgical implants[J]. Materials China, 2010, 29(12): 35-51.

[3] 吕祥鸿, 舒滢, 赵国仙, 等. 钛合金石油管材的研究和应用进展[J]. 稀有金属材料与工程, 2014, 43(6): 1518-1524.

Lü Xianghong, Shu Ying, Zhao Guoxian, et al.. Research and application progress of Ti alloy oil country tubular goods[J]. Rare Metal Materials and Engineering, 2014, 43(6): 1518-1524.

[4] 杨英丽, 罗媛媛, 赵恒章, 等. 我国舰船用钛合金研究应用现状[J]. 稀有金属材料与工程, 2011, 40(s2): 538-544.

Yang Yingli, Luo Yuanyuan, Zhao Hengzhang, et al.. Research and application status of titanium alloys for warships in China[J]. Rare Metal Materials and Engineering, 2011, 40(s2): 538-544.

[5] 鲁磊. TC4钛合金与304不锈钢的电子束焊接方法研究[D]. 南京: 南京理工大学, 2012.

Lu Lei. Research on electron beam welding of TC4 titanium alloy and 304 stainless steel[D]. Nanjing: Nanjing University of Science and Technology, 2012.

[6] Satoh G, Yao Y L, Qiu C A. Strength and microstructure of laser fusion-welded Ti-SS dissimilar material pair[J]. International Journal of Advanced Manufacturing Technology, 2013, 66(1-4): 469-479.

[7] 李标峰. 钛与钢及钛复合钢板的焊接性研究（I）[J]. 材料开发与应用, 2004, 19(1): 41-44.

Li Biaofeng. Study on the weldability of titanium and steel and titanium clad steel plate(I)[J]. Development and Application of Materials, 2004, 19(1): 41-44.

[8] Kundu S, Chatterjee S. Interface microstructure and strength properties of diffusion bonded joints of titanium-Al interlayer-18Cr-8Ni stainless steel[J]. Materials Science and Engineering A, 2010, 527(10-11): 2714-2719.

[9] Kundu S, Sam S, Chatterjee S. Interface microstructure and strength properties of Ti-6Al-4V and microduplex stainless steel diffusion bonded joints[J]. Materials & Design, 2011, 32(5): 2997-3003.

[10] Akbarimousavi S A A, GohariKia M. Investigations on the mechanical properties and microstructure of dissimilar cp-titanium and AISI 316L austenitic stainless steel continuous friction welds[J]. Materials & Design, 2011, 32(5): 3066-3075.

[11] 赵东升. 钛合金与不锈钢真空热轧形变连接机理研究[D]. 哈尔滨: 哈尔滨工业大学, 2008.

Zhao Dongsheng. Mechanism on the vacuum hot rolling-deformation bonding of titanium alloy and stainless steel[D]. Harbin: Harbin Institute of Technology, 2008.

[12] Zhao D S, Yan J C, Liu Y J, et al.. Interfacial structure and mechanical properties of hot-roll bonded joints between titanium alloy and stainless steel using niobium interlayer[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(9): 2839-2844.

[13] 陈明洁, 徐道荣. 钛及钛合金与不锈钢的钎焊技术研究现状[J]. 现代焊接, 2010(7): 5-8.

Chen Mingjie, Xu Daorong. Present situation about brazing technology study of Ti, Ti alloy and stainless steel[J]. Modern Welding Technology, 2010(7): 5-8.

[14] Tashi R S, Mousavi S A A A, Atabaki M M. Diffusion brazing of Ti-6Al-4V and austenitic stainless steel using silver-based interlayer[J]. Materials & Design, 2014, 54(2): 161-167.

[15] 王红阳, 张兆栋, 曹贺. 基于镍合金中间层的镁/钢异质金属激光电弧复合胶焊技术[J]. 焊接学报, 2014, 35(4): 83-86.

Wang Hongyang, Zhang Zhaodong, Cao He. Laser-TIG-adhesive hybrid welding of magnesium to steel with Ni alloy interlayer[J]. Transactions of the China Welding Institution, 2014, 35(4): 83-86.

[16] 马然, 董皕喆, 吴世凯, 等. 薄板钛合金光纤激光钨极惰性气体保护焊电弧复合焊接工艺研究[J]. 中国激光, 2014, 41(5): 0503003.

Ma Ran, Dong Bizhe, Wu Shikai, et al.. Study on fiber laser-tungsten inert gas hybrid welding of titanium sheet[J]. Chinese J Lasers, 2014, 41(5): 0503003.

[17] 王晓南, 陈长军, 朱广江, 等. 钢铁材料激光电弧复合焊接技术研究进展[J]. 激光与光电子学进展, 2014, 51(3): 030008.

Wang Xiaonan, Chen Changjun, Zhu Guangjiang, et al.. Research progress on laser-arc hybrid welding of steel[J]. Laser & Optoelectronics Progress, 2014, 51(3): 030008.

[18] 李飞, 邹江林, 孔晓芳, 等. 高功率光纤激光-TIG复合焊接实验研究[J]. 中国激光, 2014, 41(5): 0503004.

Li Fei, Zou Jianglin, Kong Xiaofang, et al.. Experimental research on high power fiber laser-TIG hybrid welding[J]. Chinese J Lasers, 2014, 41(5): 0503004.

[19] Wang T, Zhang B G, Feng J C, et al.. Effect of a copper filler metal on the microstructure and mechanical properties of electron beam welded titanium-stainless steel joint[J]. Materials Characterization, 2012, 73: 104-113.

王红阳, 李权, 宋刚, 刘黎明. 基于铜合金中间层的钛合金与不锈钢激光电弧复合热源焊接研究[J]. 中国激光, 2016, 43(5): 0503002. Wang Hongyang, Li Quan, Song Gang, Liu Liming. Laser-Arc Hybrid Welding of Titanium Alloy and Stainless Steel with Copper Interlayer[J]. Chinese Journal of Lasers, 2016, 43(5): 0503002.

基于铜合金中间层的钛合金与不锈钢激光电弧复合热源焊接研究下载： 544次

关于本站 Cookie 的使用提示

全站搜索

基于铜合金中间层的钛合金与不锈钢激光电弧复合热源焊接研究 下载： 544次

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

基于铜合金中间层的钛合金与不锈钢激光电弧复合热源焊接研究下载： 544次