[1] Karbasian H, Tekkaya A E. A review on hot stamping［J］. Journal of Materials Processing Technology, 2010, 210(15): 2103-2118.

[2] Merklein M, Lechler J, Geiger M. Characterisation of the flow properties of the quenchenable ultra high strength steel 22MnB5［J］. CIRP Annals-Manufacturing Technology, 2006, 55(1): 229-232.

[3] Kang M, Kim C, Bae S M. Laser tailor-welded blanks for hot-press-forming steel with arc pretreatment［J］. International Journal of Automotive Technology, 2015, 16(2): 279-283.

[4] 刘国承, 田杰平, 史玉升, 等. 汽车用钢焊接技术研究进展［J］. 激光与光电子学进展, 2015, 52(1): 010004.

    Liu Guocheng, Tian Jieping, Shi Yusheng, et al. Review of welding technologies for automotive steel sheets［J］. Laser & Optoelectronics Progress, 2015, 52(1): 010004.

[5] 魏 菁, 王 欢, 石少坚, 等. 10CrSiNiCu船用高强钢光纤激光焊接接头组织和性能［J］. 中国激光, 2016, 43(3): 0303003.

    Wei Jing, Wang Huan, Shi Shaojian, et al. Microstructure and properties of fiber laser wire welded joints of 10CrSiNiCu high strength shipbuilding steel［J］. Chinese J Lasers, 2016, 43(3): 0303003.

[6] Jia J, Yang S L, Ni W Y, et al. Microstructure and mechanical properties of fiber laser welded joints of ultrahigh-strength steel 22MnB5 and dual-phase steels［J］. Journal of Materials Research, 2014, 29(21): 2565-2575.

[7] 伍 强, 徐兰英, 杨永强, 等. 高强钢激光焊接残余应力的研究［J］. 中国激光, 2015, 42(6): 0603007.

    Wu Qiang, Xu Lanying, Yang Yongqiang, et al. Study on laser welding residual stress of high strength steel［J］. Chinese J Lasers, 2015, 42(6): 0603007.

[8] Kim C H, Choi J K, Kang M J, et al. A study on the CO2 laser welding characteristics of high strength steel up to 1500 MPa for automotive application［J］. Journal of Achievements in Materials and Manufacturing Engineering, 2010, 39(1): 79-86.

[9] 张 帆, 李 芳, 华学明, 等. Al-Si镀层在激光拼焊板焊缝中分布及性能影响研究［J］. 中国激光, 2015, 42(5): 0503005.

    Zhang Fan, Li Fang, Hua Xueming, et al. Research of effects with Al-Si coating on distribution and performance of tailored laser［J］. Chinese J Lasers, 2015, 42(5): 0503005.

[10] Iordachescu D, Blasco M, Lopez R, et al. Recent achievements and trends in laser welding of thin plates［J］. Journal of Optoelectronics and Advanced Materials, 2011, 13(7-8): 981-985.

[11] Kim C, Kang M J, Park Y D. Laser welding of Al-Si coated hot stamping steel［J］. Procedia Engineering, 2011,10: 2226-2231.

[12] Lee M S, Moon J H, Kang C G. Investigation of formability and surface micro-crack in hot deep drawing by using laser-welded blank of Al-Si and Zn-coated boron steel［J］. Proceedings of the Institution of Mechanical Engineers Part B, 2014, 228(4): 540-552.

[13] Norman P, Wiklund G, Janiak P, et al. Comparison of 22MnB5-steel with and without AlSi-coating during laser hybrid arc welding［C］. Conference on Laser Materials Processing in the Nordic Countries, 2011, 13.

[14] Kang M, Kim C, Lee J. Weld strength of laser-welded hot-press-forming steel［J］. Journal of Laser Applications, 2012, 24(2): 022004.

[15] Davis C L, King J E. Cleavage initiation in the intercritically reheated coarse-grained heat-affected zone: Part I. Fractographic evidence［J］. Metallurgical and Materials Transactions A, 1994, 25(3): 563-573.

[16] Kang M, Kim Y M, Kim C. Effect of heating parameters on laser welded tailored blanks of hot press forming steel［J］. Journal of Materials Processing Technology, 2016, 228: 137-144.