大变形下基于数字图像相关的改进分段位移传递法

叶南; 张丽艳

doi:doi:10.3788/aos20103004.0976

光学学报, 2010, 30 (4): 976, 网络出版: 2010-04-20

大变形下基于数字图像相关的改进分段位移传递法

Improved Fractionized Displacement Transfer Algorithm Based on Digital Image Correlation in Large Deformation Applications

论文大纲

叶南 ^*张丽艳

作者单位

南京航空航天大学江苏省精密与微细制造技术重点实验室,江苏南京 210016

摘要

将数字图像相关方法用于物体表面发生大变形时的图像匹配时,经常因变形区域非线性变形和变形过大而遇到问题。借鉴已有的分段测量思想,提出了一种改进的位移测量方法。该方法根据图像间的相关程度将图像序列中的某一阶段图像重新选取为参考图像,然后将先前匹配得到的该图像上的亚像素子区中心圆整成整像素整坐标,从而可以直接利用数字图像灰度分布作为该参考子区的灰度分布进行数字图像相关计算。对像素圆整过程中损失的精度,利用连续介质的变形连续性概念进行精度补偿。另外提出用生长法获取初始匹配点,提高了匹配点对生成效率,并且根据由生长法获取的待匹配点集与由相关计算得到的最优匹配点集之间的比率实现参考图像的自动选取。实验对比和精度分析显示所提方法有效、可靠,匹配精度在0.01 pixel量级。

Abstract

Difficulties often arise when digital image correlation (DIC) method is used for serial image matching in nonlinear and large deformation applications. An improved algorithm is proposed by utilizing the concept of fractionized displacement transfer (FDT). For a series of image that records the deformation process,the matching algorithm automatically rechoose an intermediate image as the reference image when the correlation level between the current reference and target images drops below a given threshold. Then the sub-pixel corresponding points in the new reference image are rounded into intergral pixels to facilitate the subsequent DIC matching procedure. A method,which is specifically designed based on the continuum assumption,is proposed for compensating the loss of accuracy caused by the pixel rounding. In addition,a growing method for obtaining initial matching points is proposed,which proved to be able to improve the matching effect and efficiency. The reference images are chosen in terms of the ratio of the number of points in the initial matching set to the number of matched points obtained by the correlation method. Experiment and accuracy analysis demonstrate that the proposed technique is effective and reliable,the matching accuracy is on the order of 0.01 pixel.

参考文献

[1] . H. Peters,W. F. Ranson.Digital imaging techniques in experimental stress analysis[J]. Opt. Engng., 1982, 21(3): 427-431.

[2] M. A. Sutton,S. R. McNeill,J. D. Helm et al..Advances in two-dimensional and three-dimensional computer vision[C]. P. K Rastogi,ed. Topics in Applied Physics,Springer Verlag,2000,77:323-372

[3] 杨勇,王琰蕾,李明等. 高精度数字图像相关测量系统及其技术研究[J]. 光学学报,2006,26(2):197-201

Yang Yong,Wang Yanlei,Li Ming et al.. Research of high accuracy digital image correlation measurement system[J]. Acta Optica Sinica,2006,26(2):197-201

Pan Bing,Xie Huimin. Full-field strain measurement based on least-square fitting of local displacement for digital image correlation method[J]. Acta Optica Sinica,2007,27(11):1980-1986

[5] 孙伟,何小元,郑翔. 基于单摄像机的三维位移测试方法[J],光学学报,2008,28(9):1723-1729

Sun Wei,He Xiaoyuan,Zheng Xiang. Three-dimensional displacement measurement based on single CCD camera[J]. Acta Optica Sinica,2008,28(9):1723-1729

[6] . 数字散斑相关技术进展及应用[J]. 实验力学, 2006, 21(6): 689-702.

. . The progress and application of digital speckle correlation method[J]. J. Experimental Mechanics, 2006, 21(6): 689-702.

[7] . Lu,P. D. Cary. Deformation measurement by digital image correlation:implementation of a second-order displacement gradient[J]. Experimental Mechanics, 2000, 40(4): 393-400.

[8] . W. Schreier,M. A. Sutton. Systematic errors in digital image correlation due to undermatched subset shape functions[J]. Experimental Mechanics, 2002, 42(3): 303-310.

[9] P. F. Luo,Y. J . Chao,M. A. Sutton. Application of stereo vision to three-dimensional deformation analyses in fracture experiments[J ]. Opt. Engng.,1994,33(3):981-990

[10] H. W. Schreier. Investigation of two and three-dimensional image correlation techniques with applications in experimental mechanics[D]. University of South Carolina. 2003

[11] . 数字图像相关方法在土木测试领域中的实验研究[J]. 南京航空航天大学学报, 2009, 41(2): 271-275.

. Experimental studies on application of digital image correlation in measur ing field of civil engineering[J]. J. Nanjing University of Aeronautics & Astronautics, 2009, 41(2): 271-275.

[12] . C. Jin,Z. Wu,N. K. Bao. Digital speckle correlation method with compensation technique for strain field measurement[J]. Optics and Laser in Engineering, 2003, 39(4): 457-464.

[13] . Tong. An Evaluation of digital image correlation criteria for strain mapping applications[J]. Strain, 2005, 41(4): 167-175.

[14] . A. Bruck,S. R. McNeil,M. A. Sutton et al..Digital image correlation using newton-raphson method of partial differential correction[J]. Experimental Mechanics, 1989, 29(3): 261-267.

[15] 潘兵,谢惠民,续伯钦等. 应用数字图像相关方法测量含缺陷试样的全场变形[J]. 实验力学,2007,22(3,4):379-384

Pan6 Bing,Xie Huimin,Xu Boqin et al.. Full-field deformation measurement of specimen with discontinuity using digital image correlation[J]. J. Experimental Mechanics,2007,22(3,4):379-384

[16] . 图像相关方法中采用多种子区进行位移测量[J]. 天津大学学报, 2005, 38(4): 298-302.

. . Using multi-subregions in image correlation method for displacement measurement[J]. J. Tianjin University, 2005, 38(4): 298-302.

[17] . 基于平面模板自由拍摄的双目立体测量系统的现场标定[J]. 航空学报, 2007, 28(3): 695-701.

. . Field calibration of binocular stereo system based on planar template and free snapping[J]. Acta Areonautica Etastronautica Sinica, 2007, 28(3): 695-701.

[18] . Vendroux,W. G. Knauss. Submicron deformation field measurements:part2. improved digital image correlation[J]. Experimental Mechanics, 1998, 38(2): 86-92.

叶南, 张丽艳. 大变形下基于数字图像相关的改进分段位移传递法[J]. 光学学报, 2010, 30(4): 976. Ye Nan, Zhang Liyang. Improved Fractionized Displacement Transfer Algorithm Based on Digital Image Correlation in Large Deformation Applications[J]. Acta Optica Sinica, 2010, 30(4): 976.

大变形下基于数字图像相关的改进分段位移传递法

关于本站 Cookie 的使用提示

全站搜索

大变形下基于数字图像相关的改进分段位移传递法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索