脉冲激光填丝焊对镍基合金薄板焊缝成形及微观组织的影响 下载: 566次
[1] Zheng M G, Yan J Q, Jun S T, et al. The general design and technology innovations of CAP1400[J]. Engineering, 2016, 2(1): 97-102.
[2] Avrin A P, He G, Kammen D M. Assessing the impacts of nuclear desalination and geoengineering to address China′s water shortages[J]. Desalination, 2015, 360: 1-7.
[3] Manikandan M, Arivazhagan N, Rao M N, et al. Improvement of microstructure and mechanical behavior of gas tungsten arc weldments of alloy C-276 by current pulsing[J]. Acta Metallurgica Sinica, 2015, 28(2): 208-215.
[4] Manikandan M, Arivazhagan N, Rao M N, et al. Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques[J]. Journal of Manufacturing Processes, 2014, 16(4): 563-572.
[5] 李新和, 严岳胜, 刘燕平, 等. 镍基合金薄板焊缝组织与性能[J]. 塑性工程学报, 2011, 18(6): 91-96.
Li Xinhe, Yan Yuesheng, Liu Yanping, et al. Study on microstructure and properties of welded joint of extra thin Ni-based alloy plate[J]. Journal of Plasticity Engineering, 2011, 18(6): 91-96.
[6] Ahmad M, Akhter J I, Akhtar M, et al. Microstructure and hardness studies of the electron beam welded zone of Hastelloy C-276[J]. Journal of Alloys and Compounds, 2005, 390(1-2): 88-93.
[7] Manikandan M, Hari P R, Vishnu G. Investigation of microstructure and mechanical properties of super alloy C-276 by continuous Nd∶YAG laser welding[J]. Procedia Materials Science, 2014, 5: 2233-2241.
[8] Ventrella V A, Berretta J R, Rossi W D. Pulsed Nd∶YAG laser welding of Ni-alloy Hastelloy C-276 foils[J]. Physics Procedia, 2012, 39: 569-576.
[9] 马广义, 吴东江, 王占宏, 等. 脉冲激光焊接对超薄Hastelloy C-276焊缝成形的影响[J]. 中国激光, 2011, 38(6): 0603014.
[10] Ma G Y, Wu D J, Niu F Y, et al. Microstructure evolution and mechanical property of pulsed laser welded Ni-based superalloy[J]. Optics and Lasers in Engineering, 2015, 72: 39-46.
[11] Gatzen M,Tang Z, Vollertsen F. Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire[J]. Physics Procedia, 2011, 12: 56-65.
[12] Sun Z, Salminen S. Current status of laser welding with wire feed[J]. Materials and Manufacturing Processes, 1997, 12(5): 759-777.
[13] Turichin G, Tsibulskiy I, Kuznetsov M, et al. Influence of the gap width on the geometry of the welded joint in hybrid laser-arc welding[J]. Physics Procedia, 2015, 78: 14-23.
[14] 王启明, 乔俊楠, 邹江林, 等. A7N01铝合金光纤激光-变极性TIG复合填丝焊接工艺研究[J]. 中国激光, 2016, 43(6): 0602004.
[15] 刘东宇, 李 东, 李凯斌, 等. 相同激光线能量对焊缝组织和性能的影响[J]. 激光与光电子学进展, 2015, 52(10): 101402.
[16] 陈根余, 陈 飞, 张 屹, 等. 对接间隙对车用高强钢光纤激光焊接的影响[J]. 中国激光, 2011, 38(6): 0603013.
[17] Cieslak M J, Headley T J, Romig A D. The welding metallurgy of Hastelloy alloys C-4, C-22, and C-276[J]. Metallurgical Transactions A, 1986,17(11): 2035-2047.
[18] Du Pont J, N, Lippold J C, Kiser S D. Welding metallurgy and weldability of nickel-base alloys[M]. New Jersey: John Wiley & Sons Inc, 2009: 47-150.
吴冬冬, 柴东升, 马广义, 周思雨, 于京令, 吴东江. 脉冲激光填丝焊对镍基合金薄板焊缝成形及微观组织的影响[J]. 激光与光电子学进展, 2017, 54(3): 031404. Wu Dongdong, Chai Dongsheng, Ma Guangyi, Zhou Siyu, Yu Jingling, Wu Dongjiang. Effect of Pulsed Laser Welding with Filler Wire on Weld Forming and Microstructures of Thin Nickel-Based Alloy Sheet[J]. Laser & Optoelectronics Progress, 2017, 54(3): 031404.