[1] 彭先觉, 王真.Z箍缩驱动聚变-裂变混合能源堆总体概念研究[J].强激光与粒子束, 2014, 26:090201.(Peng Xianjue, Wang Zhen. Conceptual research on Z-pinch driven fusion-fission hybrid reactor. High Power Laser and Particle Beams, 2014, 26:090201)

[2] Xiao C, Chen X, Kang C, et al. Material properties and tritium release behavior of neutron-irradiated ceramic tritium breeders[J]. Progress in Chemistry, 2011, 23:1906-1914.

[3] Roux N, Tanaka S, Johnson C. Ceramic breeder material development[J]. Fusion Engineering and Design, 1998, 41:31-35.

[4] Okuno K, Hiroshi K. Tritium diffusivity in lithium-based ceramic breeders irradiated with neutrons[J]. Fusion Engineering and Design, 1989, 8:355-358.

[5] Nishikawa M, Kinjyo T, Nishida Y. Chemical form of tritium released from solid breeder materirals[J]. Journal of Nuclear Materials, 2004, 325:87-93.

[6] 杨本福,万竟平,曹小华,等.锂陶瓷γ-LiAlO2放氚行为研究[J].原子能科学技术, 1999, 33(5):441-445.(Yang Benfu, Wan Jingping, Cao Xiaohua, et al. Study on tritium release behavior from lithium aluminate γ-LiAlO2. Atomic Energy Science and Technology, 1999, 33(5):441-445)

[7] 陈利宾,周元林,李迎军,等.氢及其同位素在溴化丁基橡胶中渗透的分子模拟[J].强激光与粒子束, 2014, 26:052010.(Chen Libin, Zhou Yuanlin, Li Yingjun, et al. Molecular simulation of transport behavior of hydrogen and hydrogen isotopes in brominated butyl rubber. High Power Laser and Particle Beams, 2014, 26:052010)

[8] Gao X L, Chen X J, Gu M, et al. Fabrication and characterization of Li4SiO4 ceramic pebbles by wet method[J]. Journal of Nuclear Materials, 2012, 424:210-215.

[9] Nishikawa M, Kinjyo T, Ishizaka T, et al. Release behavior of bred tritium from LiAlO2[J]. Journal of Nuclear Materials, 2004, 335:70-76.

[10] Tomkov E. TDS spectra analysis[J]. Surface Science, 1996, 351:309-318.

[11] Xiao C, Kang C, Chen X, et al. Improvement of hydrogen isotope exchange reactions on Li4SiO4 ceramic pebble by catalytic metals[J]. Chinese Chemical Letters, 2012, 23:936-940.

[12] Crank J. The Mathematics of Diffusion[M]. 2nd ed. Xford:Clarendon Press, 1975:89.

[13] Okuno K, Kudo H. Thermal release of tritium produced in sintered Li2O pellets[J]. Journal of Nuclear Materials, 1983, 116:82-85.

[14] Tiliks J E, Kizane G K, Supe A A. Formation and properties of radiation-induced defects and radiolysis products in lithium orthosilicate[J]. Fusion Engineering and Design, 1991, 17:17-20.

[15] Nishikawa Y, Oyaidzu M, Yoshikawa A. Correlation between tritium release and thermal annealing of irradiation damage in neutron-irradiated Li2SiO3[J]. Journal of Nuclear Materials, 2007, 367/370:1371-1376.

[16] Oyaidzu M, Kimura H, Yoshikawa A, et al. Correlation between annihilation of irradiation defects and tritium release in neutron-irradiated lithium zirconate[J]. Fusion Engineering and Design, 2006, 81:583-588.

[17] Oyaidzu M, Morimoto Y, Kodama H, et al. Correlation between annihilation of radiation defects and tritium release in Li2TiO3[J]. Journal of Nuclear Materials, 2004, 329/333:1313-1317.

[18] Abramenkovs, Tiliks J, Kizane G. Basic study of influence of radiation on tritium release process from lithium silicates[J]. Journal of Nuclear Materials, 1997, 248:116-120.