[1] 刘胜春. 基于双测头的动压马达气膜刚度测量技术研究［D］.哈尔滨: 哈尔滨工程大学, 2013.

    LIU SH CH.Research on Gas-film Rigidity Measurement of Dynamic Pressure Motor with Dual-probe ［D］. Harbin: Harbin Engineering University, 2013.(in Chinese)

[2] 王京锋, 刘景林, 闫亚超. 陀螺电机动压气体轴承间隙误差分析与改进 ［J］. 中国惯性技术学报, 2015, 23(6): 786-793.

    WANG J F, LIU J L, YAN Y CH. Analysis and improvement on gap deviation of gas-dynamic bearing for gyroscope motor ［J］. Journal of Chinese Inertial Technology, 2015, 23(6): 786-793.(in Chinese)

[3] LAI T, CHEN S, MA B, et al.. Effects of bearing clearance and supporting stiffness on performances of rotor-bearing system with multi-decked protuberant gas foil journal bearing ［J］. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2014, 228(7): 780-788.

[4] RADIL K, HOWARD S, DYKAS B.The role of radial clearance on the performance of foil air bearings ［J］. Tribology Transactions, 2002, 45(4): 485-490.

[5] DAL A, KARACAY T.Dynamics of externally pressurized air bearing with high values of clearance ［J］. Volume 2: Dynamics, Vibration and Control; Energy, Fluids Engineering Micro and Nano Manufacturing, 2014.

[6] MEIER N, GEORGIADIS A. Automatic assembling of bearings including clearance measurement ［C］. Procedia CIRP, Research and Innovation in Manufacturing: Key Enabling Technologies for the Factories of the Future-Proceedings of the 48th CIRP Conference on Manufacturing Systems, Ischia, Italy: 2016, 41: 242-246.

[7] CHEN Y X, YANG S N.Dynamic measurement of bearing radial clearances ［J］. Key Engineering Materials, 2005, 295: 361-366.

[8] JIAO J P, ZHANG Q, WU B, et al.. Measurement of lubricant film thickness using incidence ultrasound ［C］. Proceedings-2008 IEEE International Ultrasonics Symposium, Beijing, China: IUS, 2008: 836-839.

[9] ADDABBO T, BERTOCCI F, FORT A, et al.. A clearance measurement system based on on-component multilayer tri-axial capacitive probe ［J］. Measurement, 2018, 124: 575-581.

[10] 杨劲, 任同群, 王晓东. 位移补偿器压电陶瓷片微位移自动测量设备 ［J］. 光学 精密工程, 2016, 24(10s): 461-467.

    YANG J, REN T Q, WANG X D.Automatic measurement equipment for micrometric displacement of piezoelectric ceramic piece of displacement compensator ［J］. Opt. Precision Eng., 2016, 24(10s): 461-467.(in Chinese)

[11] PODHRAKI M, TRONTELJ J. A differential monolithically integrated inductive linear displacement measurement microsystem ［J］. Sensors, 2016, 16(3): 384.

[12] IBARAKI S, KITAGAWA Y, KIMURA Y, et al.. On the limitation of dual-view triangulation in reducing the measurement error induced by the speckle noise in scanning operations ［J］. The International Journal of Advanced Manufacturing Technology, 2017, 88(1): 731-737.

[13] 朱革, 张超, 付敏, 等. 交变光场时空耦合型位移测量系统的研制 ［J］.光学 精密工程, 2017, 25(8): 2011-2022.

    ZHU G, ZHANG CH, FU M, et al.. Development of alternating light field space-time coupling type displacement measuring system ［J］. Opt. Precision Eng., 2017, 25(8): 2011-2022.(in Chinese)