光子学报, 2007, 36 (9): 1730, 网络出版: 2008-02-18   

背部支撑主反射镜的面形分析与支撑点优化

Displacement Analyzing and Support Position Optimizing of the Main Mirror with Backside Support
作者单位
1 中国科学院西安光学精密机械研究所,西安,710119
2 中国科学院研究生院,北京,100039
3 中国人民解放军西安通信学院,西安,710106
摘要
应用有限元方法对背部支撑的主反射镜进行静力学分析.分别对三点支撑和九点支撑进行计算,得到主镜反射面的变形值.以齐次坐标变换法和最小二乘法为理论依据求解反射面变形的PV/RMS值.利用有限元分析软件提供的二次开发功能,编写计算程序,在软件内部调用该程序直接获得PV/RMS值,利用该值作为优化分析的目标函数,寻求背部支撑的最佳支撑点位置.
Abstract
参考文献

[1] CAO Gen-rui,ZHU Qiu-dong,SU Peng.A novel concept on collimators[J].Transactions of Beijing Institute of Technology,2003,23(4):453-456.曹根瑞,朱秋东,苏鹏.一种新概念平行光管[J].北京理工大学学报,2003,23(4):453-456.

[2] LIAO Zhi-chun.The mounting structure of reflection mirrorin collimater[J].Spacecraft Recoverry & Remote Sensing,2003,24(1):19-23.廖知春.平行光管反射镜的支承结构[J].航天返回与遥感,2003,24(1):19-23.

[3] YE Lou,WANG Zhao-xun.Supporting and adjusting for collimator primary mirror with large-aperture and long focal length[J].Optics and Precision Engineering,2000,8(5):462-465.叶露,王肇勋.大口径长焦距平行光管主反射镜支撑与调整机构的研究[J].光学精密工程,2000,8(5):462-465.

[4] LI Fu,RUAN Ping,ZHAO Bao-chang.Study on the surface deformation of flat reflector under gravity load[J].Acta Photonica Sinica,2005,34(2):272-275.李福,阮萍,赵葆常.重力作用下平面反射镜变形研究[J].光子学报,2005,34(2):272-275.

[5] FENG Shu-long,ZHANG Xin,WENG Zhi-cheng,et al.Study on support way of large-aperture mirror with flat rear surface[J].Optical Technique,2004,30 (6):679-681.冯树龙,张新,翁志成,等.大口径平背形主镜支撑方式的选择[J].光学技术,2004,30(6):679-681.

[6] DING Fu-jian,LI Ying-cai.The stress and strain analysis of main reflector with uniform pressure support and support angle optimization[J].Acta Photonica Sinica,1998,27 (11):1041-1045.丁福建,李英才.反射镜浮动支撑应力与变形分析及支撑参量优化[J].光子学报,1998,27(11):1041-1045.

[7] . A study on support structure of the one-meter primary mirror of the space solar telescope[J]. ASTRON R& T-PNAOC, 2004, 1(2): 99-106.

[8] WU Qing-bin,CHEN Shi-jin,DONG Shen.Optimization of parameters structural design of lightweight reflector[J].Optics and Precision Engineering,2003,11 (5):466-471.吴清彬,陈时锦,董申.参量化方法在轻质反射镜结构设计中的应用[J].光学精密工程,2003,11(5):466-471.

[9] . A thermo-optical analysis method for a space optical remote sensor optostructural system[J]. Optical Engineering, 2004, 43(11): 2730-2735.

[10] LIANG Jin-wen,CHEN Lin-cai,HE Gong.Theory of error and data processing[M].Beijing:China Metrology Publishing House.1989.梁晋文,陈林才,何贡.误差理论与数据处理[M].北京:中国计量出版社,1989.

[11] MA Rui-min,YI Zhi-an.Fortran90 program design[M].Harbin:Publishing House of Harbin Engineering University,1998.马瑞民,衣治安.FORTRAN90程序设计[M].哈尔滨:哈尔滨工程大学出版社,1998.

陈永聪, 胡永明, 李英才, 车嵘. 背部支撑主反射镜的面形分析与支撑点优化[J]. 光子学报, 2007, 36(9): 1730. 陈永聪, 胡永明, 李英才, 车嵘. Displacement Analyzing and Support Position Optimizing of the Main Mirror with Backside Support[J]. ACTA PHOTONICA SINICA, 2007, 36(9): 1730.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!