核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟
郭渤, 郭玉泉, 冯伟, 董国安, 邓子龙, 高兴军, 晏永飞. 核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟[J]. 应用激光, 2020, 40(2): 254.
Guo Bo, Guo Yuquan, Feng Wei, Dong Guoan, Deng Zilong, Gao Xingjun, Yan Yongfei. Numerical Simulation of Multi-field Coordinated Control of Stresses and Distortions in Laser Welding of Thin Sheet for Nuclear Reactor Coolant Pump Can[J]. APPLIED LASER, 2020, 40(2): 254.
[1] 张明乾, 刘昱, 李承亮.浅谈压水堆核电站AP1000屏蔽式电动主泵[J].水泵技术, 2008(4): 1-5.
ZHANG MINGQIAN, LIU YU, LI CHENGLIANG.Brief analysis on reactor coolant pump of pressurized water reactor nuclear power plant AP1000[J].Water Pump Technology, 2008(4): 1-5.
[2] 关锐, 高永军.AP1000反应堆主泵屏蔽套制造工艺浅析[J].中国核电, 2008, 1(1): 49-53.
GUAN RUI, GAO YONGJUN.Brief analysis on fabrication process of AP1000 reactor coolant pump can[J].China Nuclear Power, 2008, 1(1): 49-53.
[3] 庄亚平.AP1000屏蔽泵的应用分析[J].电力建设, 2010, 31(11): 98-101.
ZHUANG YAPING.Application of AP1000 canned motor pump[J].Electric Power Construction, 2010, 31(11): 98-101.
[4] 石岩, 张宏, 渡部武弘, 等.连续-脉冲双激光束焊接钢-铝合金[J].中国激光, 2010, 37(4): 1132-1137.
[5] 马广义, 吴东江, 王占宏, 等.脉冲激光焊接对超薄Hastelloy C-276焊缝成形的影响[J].中国激光, 2011, 38(6): 161-165.
MA GUANGYI, WU DONGJIANG, WANG ZHANHONG, et al.Weld joint forming of thin Hastelloy C-276 sheet of pulsed laser welding[J].Chinese Journal of Lasers, 2011, 38(6): 161-165.
[6] ZAIN-UL-ABDEIN M, NLIAS D, JULLIEN J F, et al.Experimental investigation and finite element simulation of laser beam welding induced residual stresses and distortions in thin sheets of AA 6056-T4[J].Materials Science and Engineering A, 2010, 527(12): 3025-3039.
[7] SCHENK T, RICHARDSON I M, KRASKA M, et al.A study on the influence of clamping on welding distortion[J].Computational Materials Science, 2009, 45(4): 999-1005.
[8] SCHENK T, DOIG M, ESSER G, et al.Influence of clamping support distance on distortion of welded T joints[J].Science and Technology of Welding and Joining, 2010, 15(7): 575-582.
[9] 张增磊, 史清宇, 鄢东洋, 等.夹具拘束模型在焊接过程有限元分析中的建立及应用[J].金属学报, 2010, 46(2): 189-194.
ZHANG ZENGLEI, SHI QINGYU, YAN DONGYANG, et al.Establishment and application of fixture constraint models in finite element analysis of welding process[J].Acta Metallurgica Sinica, 2010, 46(2): 189-194.
[10] 张凤英, 谭华, 陈静, 等.2024铝合金薄板焊接残余变形模拟及测量[J].应用激光, 2011, 31(5): 361-368.
[11] 关桥, 张崇显, 郭德伦.动态控制的低应力无变形焊接新技术[J].焊接学报, 1994, 15(1): 8-15.
GUAN QIAO, ZHANG CHONGXIAN, GUO DELUN.Low stress non-distortion (LSND) welding-a new technique for thin materials[J].Transactions of the China Welding Institution, 1994, 15(1): 8-15.
[12] LI J, GUAN Q, SHI Y W, et al.Stress and distortion mitigation technique for welding titanium alloy thin sheet[J].Science and Technology of Welding and Joining, 2004, 9(5): 451-458.
[13] RICHARDS D G, PRANGNELL P B, WITHERS P J, et al.Efficacy of active cooling for controlling residual stresses in friction stir welds[J].Science and Technology of Welding and Joining, 2010, 15(2): 156-165.
[14] ZHANG Y, YING Y, LIU X, et al.Deformation control during the laser welding of a Ti6Al4V thin plate using a synchronous gas cooling method[J].Materials & Design, 2016(90): 931-941.
[15] RICHTER F.Die thermophysikalischen eigenschaften der hochwarmfesten nickel-basislegierungen HASTELLOY S, HASTELLOY X und HASTELLOY C276 zwischen 20 und 1 000 ℃[J].Metall, 1988, 42(12): 1188-1191.
[16] DE A, MAITI S K, WALSH C A, et al.Finite element simulation of laser spot welding[J]. Science and Technology of Welding and Joining, 2003, 8(5): 377-384.
[17] 陶文铨. 传热学[M].西安: 西北工业大学出版社, 2006: 244-247.
TAO WENQUAN.Heat transfer [M].Xi′an: Northwestern Polytechnical University Press, 2006: 244-247.
郭渤, 郭玉泉, 冯伟, 董国安, 邓子龙, 高兴军, 晏永飞. 核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟[J]. 应用激光, 2020, 40(2): 254. Guo Bo, Guo Yuquan, Feng Wei, Dong Guoan, Deng Zilong, Gao Xingjun, Yan Yongfei. Numerical Simulation of Multi-field Coordinated Control of Stresses and Distortions in Laser Welding of Thin Sheet for Nuclear Reactor Coolant Pump Can[J]. APPLIED LASER, 2020, 40(2): 254.