核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟

郭渤; 郭玉泉; 冯伟; 董国安; 邓子龙; 高兴军; 晏永飞

doi:doi:10.14128/j.cnki.al.20204002.254

应用激光, 2020, 40 (2): 254, 网络出版: 2020-08-06

核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟

Numerical Simulation of Multi-field Coordinated Control of Stresses and Distortions in Laser Welding of Thin Sheet for Nuclear Reactor Coolant Pump Can

论文大纲

郭渤 ^*郭玉泉冯伟董国安邓子龙高兴军晏永飞

作者单位

辽宁石油化工大学机械工程学院, 辽宁抚顺 113001

摘要

为了揭示核主泵屏蔽套用Hastelloy C-276薄板脉冲激光焊接的热力学行为, 借助ANSYS软件建立了三维有限元模型。实验测量了焊接温度历程和残余变形, 验证了所建立有限元模型的可靠性。基于验证的有限元模型, 采用改变焊接过程中的夹具拘束和随焊激冷等多场调控参数的方法, 进一步研究了夹具拘束距离、激冷位置以及激冷强度对Hastelloy C-276薄板焊接纵向残余应力和横向收缩变形的影响规律。结果表明, 温度历程和残余变形的模拟结果与实验结果吻合较好; 多场调控参数对焊接纵向残余应力和横向收缩变形的分布和大小有显著影响。鉴于焊接纵向残余应力和横向收缩变形是影响核主泵屏蔽套周长尺寸精度、整体稳定性以及超长使役的关键因素, 确定了既降低横向收缩变形又兼顾纵向残余应力尽量小的合理多场调控参数是夹具拘束距离为12 mm, 激冷位置为6 mm以及激冷强度为12 500 W/(m2·K)。

Abstract

A three-dimensional finite element model (FEM) was developed by using ANSYS software to reveal the thermal-mechanical behaviors during the pulsed laser welding (PLW) of Hastelloy C-276 thin sheet for nuclear reactor coolant pump can. The welding temperature histories and residual distortions were measured to validate the FEM. Based on the verified FEM, the effects of the restraint distance, cooling position and cooling intensity on the longitudinal residual stress and transverse shrinkage distortion of Hastelloy C-276 thin sheet were investigated by the method of changing the multi-field coordinated control parameters of the fixture restraint and trailing heat sink. The results show that the simulated temperature histories and residual distortions agree well with the experimental results; the multi-field coordinated control parameters has a great influence on the distribution and magnitude of the longitudinal residual stress and transverse shrinkage distortion. As the longitudinal residual stress and transverse shrinkage distortion are the key factors for affecting the circumference dimension precision, overall stability and overlength service of the nuclear reactor coolant pump can, the reasonable multi-field coordinated control parameters for reducing the transverse shrinkage distortion and the longitudinal residual stress as small as possible were the restraint distance of 12 mm, the cooling position of 6 mm and the cooling intensity of 12 500 W/( m2·K).

参考文献

[1] 张明乾, 刘昱, 李承亮.浅谈压水堆核电站AP1000屏蔽式电动主泵［J］.水泵技术, 2008(4): 1-5.

ZHANG MINGQIAN, LIU YU, LI CHENGLIANG.Brief analysis on reactor coolant pump of pressurized water reactor nuclear power plant AP1000［J］.Water Pump Technology, 2008(4): 1-5.

[2] 关锐, 高永军.AP1000反应堆主泵屏蔽套制造工艺浅析［J］.中国核电, 2008, 1(1): 49-53.

GUAN RUI, GAO YONGJUN.Brief analysis on fabrication process of AP1000 reactor coolant pump can［J］.China Nuclear Power, 2008, 1(1): 49-53.

[3] 庄亚平.AP1000屏蔽泵的应用分析［J］.电力建设, 2010, 31(11): 98-101.

ZHUANG YAPING.Application of AP1000 canned motor pump［J］.Electric Power Construction, 2010, 31(11): 98-101.

[4] 石岩, 张宏, 渡部武弘, 等.连续-脉冲双激光束焊接钢-铝合金［J］.中国激光, 2010, 37(4): 1132-1137.

SHI YAN, ZHANG HONG, TAKEHIRO WATANABE, et al.CW/PW dual-beam YAG laser welding of steel/aluminum alloy sheets［J］.Chinese Journal of Lasers, 2010, 37(4): 1132-1137.

[5] 马广义, 吴东江, 王占宏, 等.脉冲激光焊接对超薄Hastelloy C-276焊缝成形的影响［J］.中国激光, 2011, 38(6): 161-165.

MA GUANGYI, WU DONGJIANG, WANG ZHANHONG, et al.Weld joint forming of thin Hastelloy C-276 sheet of pulsed laser welding［J］.Chinese Journal of Lasers, 2011, 38(6): 161-165.

[6] ZAIN-UL-ABDEIN M, NLIAS D, JULLIEN J F, et al.Experimental investigation and finite element simulation of laser beam welding induced residual stresses and distortions in thin sheets of AA 6056-T4［J］.Materials Science and Engineering A, 2010, 527(12): 3025-3039.

[7] SCHENK T, RICHARDSON I M, KRASKA M, et al.A study on the influence of clamping on welding distortion［J］.Computational Materials Science, 2009, 45(4): 999-1005.

[8] SCHENK T, DOIG M, ESSER G, et al.Influence of clamping support distance on distortion of welded T joints［J］.Science and Technology of Welding and Joining, 2010, 15(7): 575-582.

[9] 张增磊, 史清宇, 鄢东洋, 等.夹具拘束模型在焊接过程有限元分析中的建立及应用［J］.金属学报, 2010, 46(2): 189-194.

ZHANG ZENGLEI, SHI QINGYU, YAN DONGYANG, et al.Establishment and application of fixture constraint models in finite element analysis of welding process［J］.Acta Metallurgica Sinica, 2010, 46(2): 189-194.

[10] 张凤英, 谭华, 陈静, 等.2024铝合金薄板焊接残余变形模拟及测量［J］.应用激光, 2011, 31(5): 361-368.

ZHANG FENGYING, TAN HUA, CHENG JING, et al.The simulation and measurement of the residual deformation of welding of 2024 aluminum alloy sheet［J］.Applied Laser, 2011, 31(5): 361-368.

[11] 关桥, 张崇显, 郭德伦.动态控制的低应力无变形焊接新技术［J］.焊接学报, 1994, 15(1): 8-15.

GUAN QIAO, ZHANG CHONGXIAN, GUO DELUN.Low stress non-distortion (LSND) welding-a new technique for thin materials［J］.Transactions of the China Welding Institution, 1994, 15(1): 8-15.

[12] LI J, GUAN Q, SHI Y W, et al.Stress and distortion mitigation technique for welding titanium alloy thin sheet［J］.Science and Technology of Welding and Joining, 2004, 9(5): 451-458.

[13] RICHARDS D G, PRANGNELL P B, WITHERS P J, et al.Efficacy of active cooling for controlling residual stresses in friction stir welds［J］.Science and Technology of Welding and Joining, 2010, 15(2): 156-165.

[14] ZHANG Y, YING Y, LIU X, et al.Deformation control during the laser welding of a Ti6Al4V thin plate using a synchronous gas cooling method［J］.Materials & Design, 2016(90): 931-941.

[15] RICHTER F.Die thermophysikalischen eigenschaften der hochwarmfesten nickel-basislegierungen HASTELLOY S, HASTELLOY X und HASTELLOY C276 zwischen 20 und 1 000 ℃［J］.Metall, 1988, 42(12): 1188-1191.

[16] DE A, MAITI S K, WALSH C A, et al.Finite element simulation of laser spot welding［J］. Science and Technology of Welding and Joining, 2003, 8(5): 377-384.

[17] 陶文铨. 传热学［M］.西安: 西北工业大学出版社, 2006: 244-247.

TAO WENQUAN.Heat transfer ［M］.Xi′an: Northwestern Polytechnical University Press, 2006: 244-247.

郭渤, 郭玉泉, 冯伟, 董国安, 邓子龙, 高兴军, 晏永飞. 核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟[J]. 应用激光, 2020, 40(2): 254. Guo Bo, Guo Yuquan, Feng Wei, Dong Guoan, Deng Zilong, Gao Xingjun, Yan Yongfei. Numerical Simulation of Multi-field Coordinated Control of Stresses and Distortions in Laser Welding of Thin Sheet for Nuclear Reactor Coolant Pump Can[J]. APPLIED LASER, 2020, 40(2): 254.

核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟

关于本站 Cookie 的使用提示

全站搜索

核主泵屏蔽套用薄板激光焊接应力和变形的多场协同调控数值模拟

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索