复眼位标器的标定与探测

王克逸; 张浩; 曹兆楼; 郭方; 吴青林; 闫佩正

光学精密工程, 2010, 18 (8): 1807, 网络出版: 2010-12-07

复眼位标器的标定与探测

Calibration and detection of compound eye model

论文大纲

王克逸张浩 ^*曹兆楼郭方吴青林闫佩正

作者单位

中国科学技术大学精密机械与精密仪器系，安徽合肥 230027

复眼神经网络位置探测 compound eye neural network position detection

摘要

介绍了一种新型大视场、高灵敏度的复眼位标器，用于探测低空飞行目标并快速获取目标物体的运动参数。叙述了复眼模型的结构和制作方法，并利用Zemax对子眼成像通道光线追迹考察其成像特性。介绍了复眼标定与探测方法。采用基于LM算法的神经网络训练，建立各个通道精确的物像对应关系。为了检验神经网络标定算法的效果，采用传统的基于二次多项式拟合的算法进行校正对比。仿真结果表明，神经网络算法可以提供更好的精度，从像点可以准确地预测主光线的方向角(10-3~10-4 rad)，而且具有易于集成，方便快捷的特点。此外，进行了目标定位检测的仿真实验，计算了若干目标点的坐标，结果表明各个坐标相对误差均在3%以内，对于牺牲空间横向分辨率来提升视场角的复眼光学系统，该结果符合目标探测的要求。

Abstract

A new compound eye model with wider fields of view and higher agility was introduced to track the low-flying targets in a complex background. The struction and preparation of the compound eye model were described and its imaging channels were traced by Zamax to evaluated imaging characteristics.The calibration and detection of the compound eye were introduced,then LM neural network calibration algorithm was trained to build the relationship between object points and corresponding image points. This calibration algorithm provides an accurate direction angle prediction from their corresponding image points, and it is easy to integrate into the system. Preliminary experimental results for neural network calibration were presented and evaluated, which shows that the residual errors between actual and measured direction angles are around 10-3~10-4 rad. In detection simulation experiments, several points were calculated and results show that the errors between actual and calculated coordinates of position are within 3%. This is a good result for the compound eye sensor that sacrifices the spatial resolution to improve the angle resolution.

参考文献

[1] LAND M F, STAVENGA D G. HARDIE R C, et al.. Variations in the Structure and Design of Compound Eyes［M］. in Facets Vision, New York: Springer Verlag, 1989,90-111.

[2] JUSTH E W, KRISHNAPRASAD P S. Steering laws for motion camouflage［C］. Proceeding Royal Soc. A, 2006,462:3629-3643.

[3] . Depth estimation using the compound eye of dipteran flies[J]. Biological Cybernetics, 2006, 95: 487-501.

[4] . . Thin observation module by bound optics (TOMBO): concept and experimental verification[J]. Applied Optics, 2001, 40(11): 1806-1813.

[5] . From insect vision to robot vision[J]. Phil. Trans. Of Royal Soc. of London, 1992, 337(1281): 283-294.

[6] HOSHINO K, MURA F, MORII H, et al.. Asmall-sized panoramic scanning visual sensor inspired by the fly’s compound eye［C］. Proc. 1998 IEEE International Conference on Robotics and Automation, 1998,1641-1646.

[7] LICHTENSTEIGER L, EGGENBERGER P. Evolving the morphology of a compound eye on a robot［C］. IEEE Proc. Third European Workshop on Advanced Mobile Robotics, 1999,129 - 134.

[8] . . Light field microscopy[J]. ACM Transactions on Graphics, 2006, 25: 924-934.

[9] . . High performance imaging using large camera arrays[J]. In ACM Transactions on Graphics, 2005, 24(3): 765-776.

[10] ADELSON E H , WANG J Y. Single lens stereo with a plenoptic camera［C］. IEEE Trans. PAMI, 1992,14:99-106.

[11] . . Electronic compound-eye image sensor: construction and calibration[J]. SPIE, 2004, 5301: 13-24.

[12] . . Calibration techniques for object tracking using a compound eye image sensor[J]. SPIE, 2004, 5611: 42-52.

[13] 张红鑫,卢振武,李凤有,等.重叠复眼光学模型的建立与分析［J］.光子学报, 2007,36(6):1106-1109.

ZHANG H X, LU Z W, LI F Y，et al.. The building and analysis of the superposition compound Eye’s optical model ［J］. Acta Photonica Sinica, 2007,36(6):1106-1109. (in Chinese)

[14] 张红鑫,卢振武,刘华,等.对重叠复眼进行简化模拟与分析的新方法［J］.光学精密工程，2008,16(10):1847-1851.

ZHANG H X, LU Z W, LIU H，et al.. Novel method to simulate and analyze superposition compound eye ［J］. Opt. Precision Eng., 2008,16(10):1847-1851. (in Chinese)

[15] 张红鑫, 卢振武, 李凤有,等.曲面复眼成像系统的研究［J］.光学精密工程,2006,14(3):346-350.

ZHANG H X, LU ZH W ,LI F Y, et al.. Study on curved compound eye imaging system［J］. Opt. Precision Eng., 2006,14(3):346-350. (in Chinese)

[16] 陶圣,曾理江.结合空间侧抑制的仿生复眼模型［J］.光学技术,2007,33(3):337-340.

TAO S, ZENG L J. Compound eye model based on the spatial lateral inhibition network［J］. Optical Technique, 2007,33(3):337-340. (in Chinese)

[17] 侯亚丽,李铁.基于LM优化算法的BP神经网络目标识别方法［J］. 探测与控制学报,2008,30(1)：53-57.

HOU Y L ,LI T. Improvement of BP neural network by LM optimizing algorithm in target identification［J］. Journal of Detection & Control, 2008,30(1)：53-57. (in Chinese)

[18] 赵弘，顾继俊，林立. 基于LM神经网络的钻杆在线漏磁缺陷识别［J］.装备制造技术,2009(2):87-89.

ZHAO H, GU J J, LIN L. Drill and casing pipes on- line inspection system based on levenberg- marquardt neural network［J］. Journal of Equipment Manufacture Technology, 2009(2):87-89. (in Chinese)

[19] ZHAN Z X , WANG K Y . Fabrication of aspherical liquid lens controlled by electrostatic force ［C］. Proc. 3rd International Symp. on Advanced Optical Manufac. and Testing Tech.: Advanced Optical Manufacturing Technologies, 2007:6722-6725.

王克逸, 张浩, 曹兆楼, 郭方, 吴青林, 闫佩正. 复眼位标器的标定与探测[J]. 光学精密工程, 2010, 18(8): 1807. WANG Ke-yi, ZHANG Hao, CAO Zhao-lou, GUO Fang, WU Qing-lin, YAN Pei-zheng. Calibration and detection of compound eye model[J]. Optics and Precision Engineering, 2010, 18(8): 1807.

复眼位标器的标定与探测

关于本站 Cookie 的使用提示

全站搜索

复眼位标器的标定与探测

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索