316L不锈钢光纤激光切割工艺优化研究
[1] RIEMER A, LEUDERS S, THOENE M, et al.On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting[J].Engineering Fracture Mechanics , 2014(120): 15-25.
[2] HUANG W D, GENG X G, ZHOU Y H.Primary spacing selection of constrained dendritic growth[J].Journal of Crystal Growth, 1993(134): 105-115.
[3] YAN C, HAO L, HUSSEIN A, et al.Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting[J].Materials & Design, 2014(55): 533-541.
[4] SUN Y, MOROZ A, ALRBAEY K.Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel[J].Journal of Materials Engineering and Performance, 2014(23): 518-526.
[5] GOLNABI H, HAHAR M.Investigation of optimum condition in ozygen gas-assisted laser cutting[J].Optical & Laser Technology, 2009(41): 454-600.
[6] SOBIH M, LCORUSE P, LI L.Striation-free fibre laser cutting of mild steel sheets[J].Appl. Phys. , 2008(A 90): 171-174.
[7] 秦丰栋.大功率激光切割不锈钢板关键工艺参数研究[D].重庆: 重庆理工大学, 2012.
[8] 袁伟.YAG激光切割薄钢板的技术研究[D].长春: 长春理工大学, 2012.
[9] ZHANG B C, DEMBINSKI L, CODDER C.The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder[J].Matscing A-struct, 2013(584): 21-31.
[10] PARTHIBAN A, RAVIKUMAR R, ZUBAR H A, et al.Experimental investigation of CO2 laser cutting on AISI 316L sheet[J].Journal of scientific & Industrial Research, 2014(6): 387-393.
[11] 陈聪, 高明, 顾云泽, 等.光纤激光切割铝合金薄板工艺特性研究[J].中国激光, 2014(6): 0603004: 1-7.
[12] 王彦飞, 王续跃, 徐文骥, 等.基于图像处理的铝合金薄板激光切割质量研究[J].中国激光, 2014(1): 0103002: 1-7.
[13] LIM C K.Numerical modeling of reactive gas assisted laser cutting of metals[D].Lowa city: Lowa State University, 1995.
[14] 毕华丽.激光切割技术中工艺技术的试验研究[D].大连: 大连理工大学, 2005.
[15] CENNA A A, MATHEW P.Analysis and prediction of laser cutting parameters of fibre reinforced plastics(FRP)composite materials[J].In. J. Machine Tools & Manufacture, 2002(42): 105-113.
[16] 杨伟.高精密激光切割的理论及应用技术研究[D].烟台: 烟台大学, 2009.
[17] ZHANG B C, DEMBINSKI L, CODDERT C.The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder[J].Materials Science and Engineering A-structural, 2013(84): 21-31.
孙健峰, 张庆茂, 杨洲, 郭亮, 周斯伟. 316L不锈钢光纤激光切割工艺优化研究[J]. 应用激光, 2016, 36(1): 72. Sun Jianfeng, Zhang Qingmao, Yang Zhou, Guo Liang, Zhou Siwei. Research on Optimization of Fiber Laser Cutting Technology of 316L Stainless Steel[J]. APPLIED LASER, 2016, 36(1): 72.